PC Game Download

How to Eat Healthy While Travelling Over the Holidays

‘Tis the season again – we are entering that infamous Thanksgiving through New Years stretch where the average American will gain 8 – 12lbs!    One of the main reasons for this is that we get out of our normal routines for both exercise and diet.   It is even more challenging if you are travelling during this season because you are out of your home and have less control over your exercise and eating habits.

However, where there is a will there is a way!  Here are some key tips to prevent weight gain during travel:
1       Plan your meals and your exercise.    This is probably the most important tip because with a little planning you CAN eat healthy and get in your exercise.
2      Start by looking at your travel schedule and planning your meals during travel.   We all know how lousy the food is on an airline so instead of being subjected to the lousy and unhealthy food bring your own.    
      In many airports today, there are plenty of healthy options that you can purchase and carry on the plane.     Great options include:
a.       Nuts – see below
b.       Ready to drink shakes like Muscle Milk (even starting to see this in an organic option in airports!).
c.       Nutrition bars – see below
d.       Hard boiled eggs
e.       Salads with chicken
3      Even better buy non-perishable food before you leave home.      Excellent choices for meals and snacks that are easy to travel with include:
a.       Nuts – come in cans and pouches with smaller packages being ideal because while nuts are healthy they are high in fats and even healthy fats have lots of calories!    No honey glazed and if you need to be concerned about salt stick with unsalted, roasted nuts.    Best choices include pecans and walnuts and brazil nuts followed by almonds, then peanuts and cashews in terms of sugar content.
b.      Nutrition bars – there are a ton of healthier bar choices now, and they have actually figured out how to make a healthy bar that tastes pretty darned good without a ton of sugar that have high levels of fiber, healthy fats, and protein.      Several variety of Kind Bars fit this bill including Dark Chocolate and Sea Salt; Caramel Almond and Sea Salt; and Dark Chocolate Cinnamon Pecan.    These bars taste great and will satisfy you and travel well.
c.      Ready to mix shakes – there are many great options for shakes that are low in sugar and high in protein that taste great and come in packets that are easy to mix in a plastic shake bottle after you add water.   Gone are the days where these options must be blended in a blender.   Experiment a bit and you can find shakes that come in single serve packets that mix quite well in a plastic shaker bottle.
d.      If you are driving, consider bringing some pre-made meals in a cooler that are either ready to eat cold or can easily be microwave or baked when you arrive.   When you bring some of your own food and healthy desserts you know you will have good options!
4      Focus on a great breakfast because you can get eggs in every town in America both at restaurants and in people’s homes.   Eggs are fantastic nutrition that really satisfies, and they can be prepared in many different ways.  Starting the day off with 2 – 3 whole eggs along with some sautéed vegetables, some cheese and some berries will keep your hunger at bay and provide a healthy meal that is easy to come by!
5    Get your exercise in!  Plan before you leave – worst case you can use resistance bands and get a great workout in a very small physical space such as a hotel room.  You can also do highly effective body weight workouts while on the go and another fantastic choice for travel exercise is a suspension trainer like TRX or Core Flytes –  https://www.amazon.com/Core-Flyte-Pro-Performance-Rock-Solid/dp/B00K6MKM00  For resistance bands and workouts with them check out www.resistancebandtraining.comFor a great bodyweight workout try this one: https://workoutanytime.blogspot.com/2016/03/the-three-best-bodyweight-exercise.html
6    Go for a walk and check out the neighborhood or go see some nearby sites.   Sitting on your butt all day while food is being prepared all around you is asking for trouble!   Get up and get out and active for part of the day or offer to do some shopping for the group or pitch in with some of the physical chores if you are staying at someone’s home.
      So while it is easy to gain weight during travel over the holidays – with a little planning you can come through with little to no weight gain or even lose a pounds or two over the holidays!

How to Overcome a Negative Habit



Habits are powerful.  Unfortunately, they often are created outside our consciousness and without our permission. However, we can consciously change habits. Habits shape our lives far more than we realize— they are so strong, in fact, that they can cause our brains to cling to them at the exclusion of all else, including common sense.
At the same time, positive habits can change our lives for the better. So how are habits created and what can we do to influence them in ourselves and our clients?
Three Parts of a Habit
The Cue: a situational trigger that is based on a reward you are seeking.
The Routine:  a physical or emotional action you take to obtain the reward.
The Reward:  the satisfaction you get by following the habit.

The Steps to Changing a Habit
Identify the Routine:  You must identify how you go from a particular cue to the routine of the habit and the reward it gives you.
Understand Cravings and Rewards

The first part of a habit is the cue, but before the cue there is some type of craving.  Cravings drive habits.   Understanding cravings is key to figuring out habits.  In a habit, there is a specific reward that satisfies a particular craving.    In other words, figure out what you are getting from the habit because you ARE getting something from it!
Rewards are powerful because they satisfy cravings. But we’re often not conscious of the cravings that drive our behaviors. For example, when developing the air freshening product Febreze marketers discovered that people craved a fresh scent at the end of a cleaning ritual.  They found a craving that people were not aware of.     This craving is so strong that without added scent most people do not get satisfaction from an air freshener that just removes odors from the air – they have to smell the scent!   It is exactly the same phenomenon with breath freshners which can be made to eliminate odor WITHOUT any taste/scent, but no one buys them!
Most cravings are like this: obvious in hindsight, but difficult to discern when they are in control of your behavior. It is critical to discover the cravings that drive habits to be able to change or create habits!   To figure out which cravings are driving particular habits, it’s useful to experiment with different rewards. For example, say your reward is having a cookie after studying every night.  The next time you study deliberately substitute something else for the cookie such as going for a short walk or having a cup of tea instead. 
The next time eat an apple and another time change call a friend for call, etc. What you choose to do instead of eating a cookie is not important.  The key is to test different hypotheses to determine the exact craving that is driving your routine.   Are you craving the cookie itself, or a break from work? If it’s the cookie, is it because you’re hungry? (In which case the apple should work just as well.) Or is it because you want the burst of energy the cookie provides? (And so coffee may work just as well.) Or is it where you eat the cookie and who you are with?  Do you go to a specific place to get and eat your cookie?  If so maybe the real craving may have to do with a desire to socialize.  
As you test four or five different rewards, use this technique to identify patterns.  After each activity, note the first three things that come to mind after your reward behavior. This can be emotions, random thoughts, reflections on how you’re feeling, or just the first three words that pop into your head. Then, set an alarm on your watch or computer for fifteen minutes. When it goes off, ask yourself: Do you still feel the urge for that cookie? The reason why it’s important to write down three things— even if they are meaningless words— is twofold. First, it forces a momentary awareness of what you are thinking or feeling.
By experimenting with different rewards, you can isolate what you are actually craving, which is essential in changing a habit.
Determine the Specific Cue for the Habit

This is the trigger that initiates the craving for the reward.   So it is very important to learn the cues for habits.   Common cues including being in a particular place, being with a particular person, a particular time of time of day, a specific emotional state, etc.    Asking yourself these five questions can be very helpful for identifying cues:
Where are you when the urge for a reward hits you?
What time is it?
What is your emotional state?
Who else is present?
What did you do right before you had the urge?
Have a Plan!
Once you understand the habit you want to change you need to create a plan to change the habit!   The easiest way to do that is have a specific plan of action whenever you experience the cue or cues.    For example, if you smoke when you have coffee know this and plan to do something else deliberately whenever you have a cup of coffee.   The plan is key or you will slip right back into the old routine.
Another example is having a few beers every night when you get home.  Through the first three steps you discover that having the beer helps you relax after a stressful day.    You also learned that going for a 20-minute walk or doing Tai Chi gives you that same reward of feeling relaxed.   So now you plan to either go for a walk or do Tai Chi ever day as soon as you get home (or even better before you get home!).

Mt Trip to Manila, Philippines cont……..

I returned to Colombo on the 19th morning without any delays. On the way I met one of my colleagues at Bangkok airport and that helped pass the time as well as chat on the plane.

I found an interesting article on the web regarding “don’t know that you don’t know” I found the article to be spot on and very helpful in understanding this phenomenon. http://www.doceo.co.uk/tools/knowing.htm Now I can start to develop some strategy to work around this problem so that I am better prepared to face such an issue the next time around.

I finished documenting the results of the workshop in Manila and sent the results for comments from the client. I am still waiting for the results. Hope I am able to finish this assignment this week as it has the potential to get delayed and get ugly.

In terms of my future travel plans there are no assignments where I need to travel overseas at present. The assignments I have lined up are in Colombo. However things can change very quickly.

Benefits of Cayenne pepper Leaf For Health

BENEFITS OF CAYENNE PEPPER LEAF FOR HEALTH

Benefits of Cayenne pepper Leaf For Health – As we discussed in the previous post. We’ve explores in detail about the efficacy of chili for Health (Read First to read thoroughly). But this time we will try again to distribute information about the chili leaves that you may not know.
Just as the fruit produced. Cayenne pepper leaf also has the ability as an herbal remedy that you can be one alternative medicine traditional medicine. Therefore, man can maximize the function of the leaf chili that will be a need for this everyday.
Benefits of Cayenne pepper Leaf For Health
Benefits of Cayenne pepper Leaf For Health:
1) Can Accelerate aging to a boil in a way that leaves wither chili with a stove and an oil lamp and then attached to a boil.
2) Can Reduce abdominal bloating and colds (The trick is to puree the leaves and mixed with whiting, dab and then stay in the stomach area and vicinity).
3) Can Reduce urticaria and itching of insect bites (warm impression produced chili leaves is exactly what will help prevent itching. It is very easy, which is crushed and mixed with whiting and smeared throughout the body).
4) Can Cure stomach cramps and can solve problems with digestion (Brewed leaves chili by adding a little salt, then drink while warm).
5) Can Reduce fever and heat on the body (The trick is to attach the leaves cayenne pepper which has been smoothed on the forehead or around the body, do not forget lettuce mixed with oil).
6) Can also as a natural mouthwash (brewed some chili leaves and wear to rinse).
7) etc.
Benefits of Cayenne pepper Leaf For Health
benefits and efficacy of cayenne pepper leaves for beauty :
• As a natural remedy to get rid of acne in a way be used as a mask.
• Can Knocked out of the hair in the armpit (First Shave first and then rub the leaves are still fresh chilies are also mashed, Mix by whiting)
• Can also scrubs As the material that can be rubbed directly on the skin area.
• Can also As the material for the mask (mixed materials needed are rice, chili leaves, and little yam bean. Blend all ingredients and can be directly applied to the face area).
• etc.

Well if we have read the article above, of course, my friend was not shy and wearing chili leaves as an alternative to obtain a healthy and beautiful in a natural way.

It’s Not Just You ™ – Heroes Of The Storm ‘Screen Shake’ = ‘Motion Sickness’ (Dizzy, Nausea, Headache) [Notification]

Just a quick post to let others know that – if you are experiencing this phenomenon – getting dizzy or even nauseous while playing Heroes Of The Storm lately: It’s Not Just You™… I even whipped up an Example of the effect, for those that aren’t quite noticing it:

Example of ‘the screen shake effect’ I made, in GIF format
(Click to see slightly larger Full Size)

I first came across this in the Official Heroes Of The Storm Forums at Battle.Net. It was originally posted by “Phoenix” a couple of weeks ago, here. Although I have seen it personally in-game (noticed it), I have not suffered the nauseating effects that many may/do suffer with this Special Effect the game offers – even though I have experienced ‘game motion sickness’ from other games. [I did notice when testing and creating the above Example, that it made me slightly queasy however..]. Mainly, I have ‘been lucky’ with not experiencing it because I do not normally play the Heroes that have/produce this effect (the ‘screen shake’ effect). Here is a list of all the Heroes and Spells that can produce this effect, thanks to a helpful post by “Hatsoz” on the Official Forums:


Spells with Screen Shake
Zagara – Nydus Network (R)
Genji – Swift Strike (E)
Sgt. Hammer – Concussive Blast (W), Blunt Force Gun (R), Napalm Strike (R)
Gazlowe – Deth Lazor (W)
Lucio – Soundwave (Q), Sound Barrier (R)
Valeera – Blade Flurry (W)
Zul’jin – Twin Cleave (W), Guillotine (R)
Ragnaros – Sulfuras Smash (R)
Alarak – Lightning Surge (E)
Cho – Upheaval (R)
Karazhim – Radiant Dash (Q) (Only with Volley of Blows Talent Lv. 16), Seven-Sided Strike (R)
Anub’arak – Burrow Charge (E) (Upon resurface)
Li Li – Water Dragon (R)
Diablo – Shadow Charge (Q), Fire Stomp (W), Overpower (E)
E.T.C. – Face Melt (W), Stage Dive (R) (Landing only)
Falstad – Hinterland Blast (R)
Kerrigan – Impaling Blades (W)
Muradin – Thunder Clap (W), Dwarf Toss (E), Haymaker (R)
Sonya – Ancient Spear (Q) (On Hit), Leap (R)
Stitches – Slam (W)
Tyrael – El’druin’s Might (Q) (On sword landing), Angelic Flash (Q) (Teleport to sword), Judgment (R)
Uther – Hammer of Justic (E), Divine Storm (R)





Heroes with No Screen Shake
Valla
Tyrande
Lunara
Kael’thas
Zeratul
Cassia
Probius
Varian
Samuro
Zarya
Auriel
Gul’dan
Medivh
Chromie
Tracer
Dehaka
Xul
Li-Ming
Greymane
Gall
Artanis
Lt. Morales
Rexxar
Leoric
The Butcher
Johanna
Sylvanas
The Lost Vikings
Thrall
Jaina
Azmodan
Chen
Rehgar
Murky
Brightwing
Tychus
Abathur
Arthas
Illidan
Malfurion
Nazeebo
Nova
Raynor
Tassadar

I experimented with every single Graphic Setting available in the game (eventually running it on the Lowest Possible Settings) and could not find a Setting that disabled this effect…. I first tried Physics, then other effects-affecting settings, such as Shader level, and more, until everything was at the lowest possible Settings and still the effect appears in-game.

I even looked through the game directories (folders) for some sort of editable configuration file, but the only ones present were ‘protected’ by Blizzard, by being compressed or encrypted in their own proprietary encapsulation of some sort (which renders the files not easily readable or editable by normal means – this is understandable, as they do not want their game easily ‘hacked’ or negatively affected by end users).

So, for now – unfortunately – there is no solution for this, for sufferers of this effect. The only recourse, until Blizzard puts in an option to Disable Screen Shake, is to avoid the Heroes that produce this visual effect.



Just letting Sufferers know: It’s Not Just You™!
[I will try to remember to return to this Post and Update it once Blizzard adds this option – or a workaround is found]

My trip to New Delhi & Hyderabad Cont……..

I finished the 5th and final OCA for this assignment. The organization assessed is rather a small one but with a track record of substantial outputs. The 3rd organization Indian Institute of Dalit Studies, the 4th organization Yugantra (www.yugantra.org.in) and the 5th organization Institute of Social Studies Trust (www.isst-india.org) had fewer economists as researchers than the 1st and 2nd organizations assessed. This resulted in their research being more focused on the softer aspects of development such as gender, education and inclusion. This meant that they had more interactions with civil society organizations. In a country that is looking to grow at 8% on an annual basis it is good to have this perspective brought in to the policy making process.

I finished the OCA by 4 PM and made my way to he airport to take the flight back to Colombo. To my surprise the flight was on time and we were able to board and are ready for take off on time. I dreamt of sleeping in the plane and getting home at a decent hour and taking a shower and going to sleep so that I can start a new day in Colombo without the effects of travel. This however was not to be. As the air stewardess counted the passengers there was one passenger missing. This meant that the airport staff had to look for this idiot all over the airport. As they could not find him then they decided to offload him; so this meant that they had to offload his baggage as well. As the Delhi airport did not have a bar coding system that meant that all the baggage had to be manually processed to identify the missing passengers’ baggage. This took one and a half hours.

Apparently the passenger was a phantom as he has been checked in (as part of a group) transferring to this flight with his luggage but he was physically not there. I hope they throw the book at the counter staff that did this horrendous mistake. And fix the system to ensure that transfer baggage is not loaded on to the aircraft until the passenger physically checks in. I really thought that this type of kinks in the system would have been sorted out long time ago; apparently not.

So what promised to be a nice ride back to Colombo turned out to be the longest flight between New Delhi and Colombo. The silver lining is of course that we arrived safely!

Have to finish all my reports for the India assignment and apply for my Philippines visa next week as I have to leave for Bangladesh on the 24th of March.

WORKOUT ANYTIME in Franchise Times

WORKOUT ANYTIME in Franchise Times

The article was entitled “Open Season: Blockbuster is kind, rewinds abandoned space for franchisors” and featured information and quotes from WORKOUT ANYTIME VP of Development Randy Trotter and Buffalo Grove WORKOUT ANYTIME Owner Jeff Cercy. The article provides information about Blockbuster’s recent announcement that they’d be closing roughly 300 remaining stores, and the positive impact that’s having on franchise brands looking for real estate. Randy is quoted about the great real estate Blockbuster locations provide and their plans to utilize them in 2014, as well as the process they go through when negotiating the conversion of a Blockbuster site. The article then provides information about WORKOUT ANYTIME franchisee Jeff Cercy’s converted Blockbuster location and quotes from him about how identifiable Blockbuster propery can be.
You can view the article here. 

The Ten Steps of Body Clock Diet

The ten steps of the Body Clock Prescription that follow don’t take much time or many resources but they go a long way toward helping you stay healthy if you are well or feel better if you are ill.

  1. Follow the Body Clock Diet. Put protein in your morning meal, snacks and lunch, either by drinking the Rhythmic Shake or by emphasizing high protein foods. Move most of your carbohydrates from breakfast, lunch and morning snacks to the evening.
  2. If you scored high on the insulin resistance test, adhere as rigorously as you can to the Body Clock Diet. Because insulin resistance is at the root of so many conditions, you want to capitalize on your ability to bring down your serum insulin level. Eat the maximum tolerable amount of your protein during the day and save as many of your carbohydrates as possible for one meal in the evening. Craving carbohydrates is your enemy in this regard; you will probably need to make a gradual transition to the level of strictness that I’m recommending. That way, your insulin levels will come down step by step; they will not be screaming for carbohydrates while I’m screaming at you not to eat them.
  3. Excess alcohol and caffeine interfere with circadian rhythm. The definition of excess depends on the person and on the time of day. In the early evening, the effects of alcohol are minimized by most people’s capacity to easily metabolize two to four ounces of liquor over a two- to four-hour period. But efficient alcohol metabolism declines dramatically after 10:00 p.m., making late night drinking particularly disruptive. Avoid caffeine except at around 4:00 p.m., the one time of day when its circadian effects are neutral.
  4. Stay away from diet drinks because they send a false signal to your body. They promise the potential arrival of sugar and then, after engaging your body’s mechanism for raising insulin, let you down when the sugar doesn’t arrive.
  5. Get plenty of full spectrum sunlight in your eyes and on some part of your skin every day. When you expose your eyes to sunlight — and I hope it’s obvious that I don’t mean staring at the sun — do it without wearing spectacles. These days spectacles of all kinds block both the healthy and the injurious types of ultraviolet rays. So get out in the sun, take off your glasses and soak up a moderate amount of sunlight — at least one-half hour near dawn or dusk — every day. This does not require sunbathing, simply being out in the sun. If you live in a northern latitude where the winter days are short and there are lots of rainy, snowy or cloudy days, then consider getting a light box like those prescribed for people with seasonal affective disorder. Expose yourself to the light box for at least a couple of hours every day.
  6. Establish a regular time for going to bed at night and getting up in the morning and get sufficient sleep every night, preferably during the natural period of darkness between sundown and sunrise. While you’re asleep, expose yourself to light as little as possible. If you wake up in the middle of the night to pee, don’t turn on the light. Instead, use a dim flashlight or nightlight to light your way to the bathroom. Even a tiny amount of light at night will squash your melatonin peak. Remember that melatonin is an antioxidant and informational substance whose narrowly timed peak in the middle of the night, following a healthy exposure to light during the day, may be suppressed by ill-timed light. Failure to have a peak release of melatonin at night is like missing a bus that comes only once a day.
  7. Encourage rhythmic harmony by learning to breathe with your diaphragm. When you relinquish control to your diaphragm, your breathing will take on the normal rhythm directed by the unconscious part of your brain rather than the potentially asynchronous rhythm generated by your chest muscles. This works especially well when you engage in stressful activities that make you unconsciously hold your breath. For example, when I am on top of a ladder trying to hammer in a nail that is slightly out of reach and I dislodge the nail, bang my thumb or bend the nail, I stop and say to myself, ‘Baker, stop holding your breath and take a deep one with your diaphragm.’ Then the nail goes right in. The same is true for threading a needle, looking for lost keys, worrying about finding a restroom when you’re downtown with a filling bladder, waiting in line at the bank or driving on the freeway.
  8. Engage in some form of rhythmic exercise at the same time every day, preferably in the afternoon when muscle strength is at its peak and most people perform best. If you can walk, walk. If you can swim, do that, especially if you can find nonchlorinated water to swim in and are strong enough to swim with a good steady rhythm. If you prefer, ride a bike. But whatever you do, remember to breathe in a relaxed way, using your diaphragm, so that the effort of your exercise reinforces rhythmic harmony in your body instead of allowing unnatural chest breathing to interfere with it.
  9. Working out to music takes exercise one step farther by permitting you to synchronize your activity with the beat of the music. Of course, the ultimate refinement of exercising to music is dance. If you are ill and unable to move about, then simply listen to music, but really listen so that the music penetrates your being rather than simply acting as a background to whatever you are doing. Some types of music are more healing than others. I asked Millie Grenough, a music therapist and author of Sing It! Learn English Through Song, what would be the best choice of music for a person with inflammatory illness.3 She said, ‘It can be anything from Mozart and Vivaldi to favorite Broadway tunes, from long-remembered lullabies or Tibetan chants to your favorite song when you were sixteen. The main thing is that it be music the person loves.’
  10. Meditate daily to reinforce and integrate your body’s rhythms. And if you’re ill, use meditation as the platform from which you launch the powerful tool of visualization. When you dance, you put your whole body’s movement into the embrace of something bigger than yourself — the music. When you are fully the captive of the music, you are free to receive its blessing. And every step of the dance is a choice you make to stay with the music.

How to Wake Up to Get Healthy

HOW TO WAKE UP TO GET HEALTHY

How to Wake Up to Get Healthy – Waking up in the morning is a daily activity that is practiced by everyone. But among some of these people, there were constrained to get up early. Usually sleep is inadequate or have to chase deadlines job that requires you to overtime until late at night makes you can not wake up in the morning.
Waking up in the morning is a good first step to start your day. As the old adage says, “have to get up early so that provision does not set a chicken”. This maxim is true. By waking up the morning of our opportunity to get an experience or sustenance more opportunity than waking afternoon or evening.
Well, for that we will share tips on how to get up in the morning with eager to start all your activities.
How to Wake Up to Get Healthy - 1
1. Sleep Early
Apparently it seems simple, but the first step to get up early did have to sleep early. Doctors say that, to get enough sleep, you have to go to bed at 9 or 10 at night. After getting enough sleep so you can wake up in the morning and of course the body also fresh.
2. Prepare Yourself and Mental
The most important thing here is to build a set of mind and remind yourself of things that you can not miss out on if you do not get up early, as late to the office, a long queue waiting for the bus, daily visits to the store, etc. Once your mind alert, your body will automatically respond to your alarm clock.
3. Use Alarm Clock
Buy an alarm clock which is good, so it can wake you up when the morning. Try to set the alarm sound loud enough. If you still have not woken up in the morning.
4. Using Ringtone Favorite Song
Using ringtone favorite song, will make you into a more pleasant wake. You will also be more excited to welcome the morning and start a good mood.
5. Set the Clock Waking Early
Suppose you need to wake up at 7:30, the alarm should be set earlier into later than 7:00 or 7:15. It serves as a pause if you find it difficult to get up early. Keep after hearing the alarm sounds immediately get up, do not linger too long in bed.
6. Capitalize Up Early for Working Time Hobby
Every night, prepare a list of specific activities such as writing, singing, jogging, etc., that you want to do but can not because of your busy schedule. Before going to bed, think about what hobbies you will do tomorrow, so make yourself feel excited to get up in the morning.
7. Clean Room
Clean up your room the night before, so to get up when he saw an attractive visual environment, be able to motivate yourself to start your day feeling refreshed and energetic.
8. Do not Nap during the Day
Avoid napping during the day. Naps can cause you to be awake at night, let alone take a nap for several hours. If you feel tired and need to rest better sit down while doing relaxation like a massage or soak feet in warm water.
9. Meditation
In addition to the tips above, follow the practice of certain practices such as meditation can help you keep a healthy sleep routine, helping you to get up early in the morning.
Those are some tips to get up in the morning, excited. The very core of some of the above tips is keep the quality of your sleep, and remain committed to an early riser. Convince yourself that waking up early is a good thing for your job, your health, and your environment.

Hopefully the article How to Wake Up to Get Healthy that we can share this day can be beneficial for you. Do not forget to always visit the website abouthealthbenefits.xyz to seek other health articles. Thank You.

Taking pills and supplements

Pills and supplements both have their uses, but only in moderation and only as long as strict guidelines are followed.

Over-the-counter (OTC) diet pills

The 1991/2 Weight Loss Practices Survey, sponsored by the US Food and Drug Administration (FDA) and the National Heart, Lung and Blood Institute, found that 5 per cent of women and 2 per cent of men trying to loseweight use diet pills. Products considered by the FDA to be OTC weight- control drugs are primarily those containing the active ingredient phenylpropanolamine (PPA), such as Dexatrim and Acutrim. PPA is available over the counter for weight control in a 75mg controlled-release-dosage form. The medicine should be used in combination with a restricted diet and exercise.

Diet Start

Using diet pills containing PPA will not make a big difference in the rate of weight loss, says Robert Sherman of the FDA’s Office of OTC Drug Evaluation. ‘Even the best studies show only about a half pound (250g) greater weight loss per week using PPA combined with diet and exercise,’ he adds. Sherman cautions that the recommended dosage of these pills should not be exceeded because of the risk of possible adverse effects, such as raised blood pressure and heart palpitations.

Supplements

To rely on taking pills as a way of supplying nutrients is not ideal, for in a perfect world such nutrients should come from our food. But when you consider the quality of some of our food — fruit and vegetables grown in mineral-depleted soil, picked before they have ripened and shipped over vast distances in refrigeration, then put into long-term storage; meat full of hormones; grains stripped of most of their nutritional content — then taking a good multivitamin supplement and possibly extra vitamin C can benefit most people. And while you are trying to balance your blood-sugar levels, reduce body fat and rebuild lean muscle tissue, there are a few supplements that may help.

Key supplements

Magnesium

A fundamentally important mineral that counters insulin resistance.

It is hugely deficient in the Western diet. Consider taking 230-600mg per day, unless you have suffered kidney failure or have a high degree of AV heart block.

Quercetin

A flavonoid with powerful anti-inflammatory properties that helpsto control high insulin levels and inhibit fat production. Take 200-400mg three times a day before meals.

Omega-3 fats

If you don’t eat fish, take 1,000-3,000mg of fish oil daily in capsule form. Vegetarians can use flaxseed oil or crushed flaxseeds instead of fish oil capsules. Try flaxseed oil in salad dressings (or even in smoothies) to ensure you get enough of this health-enhancing fat.

Chromium

A trace element that plays an important role in carbohydratemetabolism and regulating blood-sugar levels. It has proved useful in treating diabetes and shown to be effective in encouraging the body to lose fat, not muscle, when dieting. Take 400-600mcg of chromium picolinate or chromiumpolynicotinate a day.

Lcarnitine

Used extensively by athletes to ensure maximum performance inendurance or aerobic sports. It is also useful for weight loss because it is involved in burning fat in muscle cells. Take 1,000-3,000mg per day.

DIETARY MYTH

Myth: I will get quicker results if I use diet pills.

Fact: there are no shortcuts — no magic pills. Losing weight sensibly and safely requires a multifaceted approach that includes setting reasonable weight-loss goals, changing eating habits and getting adequate exercise. Appetite suppressants (diet pills) may help some people in the short term, but they are not a substitute for adopting healthy eating habits in the long term.

Fallout 1 – Get It For Free… Happy 20th Birthday! [Notification]

Just a quick notification that, in celebration of the Fallout’s series debut, exactly 20 years ago to this very day, it is Totally Free on Steam, right now, from Bethesda – but only for today… Grab it before the end of the day and play one of the most RPG-Genre-Expanding, Post-Apocalyptic-Exploring Classics of PC gaming. Have fun (and thank you, Beth)!

http://store.steampowered.com/app/38400/Fallout_A_Post_Nuclear_Role_Playing_Game/


Addendum:
After trying the game out (not playing it since I had the CD version way back when!), at first, all I got was a Black Screen, but I could hear the audio of the game playing in the background… After doing some light troubleshooting, including re-installing DirectX and other steps, the easiest ‘solution’ that I eventually found was to simply choose the “Classic Version” from the Steam Launch Options. Here is what that looks like, below (these options did not show up if I used the Desktop Shortcut or clicked on the .EXE file to start the game, but they appeared consistently if I used the PLAY button in the Steam Client):
Tutorial Screenshot of simply choosing the alternate version of the game to run, if you encounter a ‘black screen’, where you can hear the audio of the game, but not see anything else concerned with the game
(Click to see Full Size)
After choosing that version, above, the game repeatedly ran fine with audio and video together in harmony, on my system (currently an AMD FX-8350 CPU and NVIDIA GTX 1060 GPU running Windows 10). I hope it works for you dear reader, as it did for me, if you run into that little initial problem… Enjoy!

[Note: It is unclear at the time of this posting, if the game it completely free ‘forever’, or if it is just ‘free to play’ for the day – UPDATE, it indeed seems to be permanently part of my Steam account – a nice ‘gift’ from Bethesda!]

Quick Tip: Can’t Record Your Game At All? (64-bit/32-bit Fix)

Just a quick tip for when it seems like you cannot record your game ‘at all’:
64-bit computing is still relatively new for home users, which means that not all 64-bit hardware and applications communicate without problems. Many game recording apps simply can’t record games that operate in 64-bit modes. Just look for a 32-bit version of your game/gameclient and then your game recording program (no matter which one you use, be it Dxtory, Bandicam, MSI Afterburner..) should be able to record the screen. [For games that use Java (eg. Minecraft), download the 32-bit Java at their website]

See you in the games!

Cut your Protein why no Sugar?

The case against sugar is a complex one. Besides the fact that refined sugar is a totally unnatural substance that has been stripped of its nutritional value—fiber, vitamins, and minerals—apart from the calories it provides, sugar in concentrated form is very hard on the pancreas. The pancreas, which is responsible for the production of insulin and therefore the regulation of blood sugar and energy levels in the body, has adapted through evolution to deal with a steady flow of glucose in small quantities such as those that result from the intake of complex carbohydrates.

One of the biggest beauty cons of all is the idea that if you eat lots of protein your muscles, skin, hair, and nails will grow strong and you will stay young. Like the old-fashioned high protein diet for building up athletic strength, it doesn’t work. The human need for protein has been grossly exaggerated. At the turn of the century, respected opinion held that we need between 120 and 169 grams of protein per day. Then Chittenden showed in human experiments that far better performance and health were possible on fifty grams, a much lower amount. Another scientist named Hindhede set the figure at thirty grams. Then Oomen in Amsterdam and Hipsley in Canberra discovered a population in Australia which develop not only full health, but exceptional muscular structure and performance on a diet of merely 15 to 20 grams of protein per day.

Diet Start

Later in the United States, the American Research Council’s Food and Nutrition Board agreed on a daily requirement of 70 grams for adults. One member of the board, named Sherman, described how this figure was arrived at. The evidence the committee examined indicated that a much lower amount was needed, somewhere around 35 grams, but there was agreement that if so low a figure had been set there would have been a public outcry, so a corresponding “margin of safety” was decided on and the 70-gram figure was published. But because the scientific basis for the figure was nonexistent, the word “recommendation” was chosen instead of “requirement.” Current recommendations for protein intake hover about the 50-gram mark, although there is strong evidence now that we probably need even less.

Your body needs amino acids, the constituents of protein, for its metabolic processes, for growth and the repair and maintenance of body tissue. Proteins are made up of twenty-two different amino acids; all but eight of them your body can manufacture itself. These eight, which have to be taken in through your foods, are referred to as “essential” amino acids.

A large portion of a protein molecule is made up of nitrogen, and one of the important things about taking protein is that it helps keep a good nitrogen balance in the body, so there is as much nitrogen coming into the body as there is leaving it. This balance helps maintain body health and muscle strength, so that you don’t go into what is known as a negative nitrogen balance, when you lose muscle tissue from your body. To keep your nitrogen right, 10 to 15 percent of your total calorie intake should be from protein.

But when a greater percentage than this of your calorie intake comes from protein foods, then your body goes into a negative mineral balance and you start gradually losing precious minerals and trace elements such as zinc, calcium, magnesium, iron, potassium, and chromium from your system. These nutrients, so easily lost from the body, are vital not only to physical health but also to emotional stability and well-being (more about minerals later). Wachmann and Bernstein of the Department of Nutrition at Harvard University investigated the high protein diet and came to the conclusion that the protein-rich (especially the meat-heavy) diet plays a strong role in the genesis of osteoporosis, a softening of the bones, particularly in women after menopause, caused by the loss of minerals. This is probably because of the high protein diet’s tendency to leach valuable minerals (in this case calcium) from the system. And purely from the point of view of physical beauty, many of these lost minerals, such as sulfur, selenium, zinc. magnesium, and calcium, can make the difference between prematurely aging skin caused by a rapid collagen and elastin breakdown, nails that split, or hair in poor condition, and radiant looks glowing with strength and health.

Finally, the breakdown and metabolism of proteins in the body lead to the formation of a number of complex by-products such as urea, nitrogen, and ammonia, which can be toxic. These wastes need to be eliminated. This isn’t always easy, and it puts great strain on the liver and kidneys. This is why, on the well-known high protein reducing diets, you are advised to drink large amounts of water in order to water down these poisons and help excrete them.

WORKOUT ANYTIME on FOX 56 Lexington

WORKOUT ANYTIME on FOX 56 Lexington

Head Trainer Carl Flotka of WORKOUT ANYTIME Lexington was recently featured on FOX 56 Lexington. In the segment Carl talks about how to portion control during the holiday season and highlights a few exercises that viewers can do to stay active.
View the full segment here.

What Does It Take to Burn Off Halloween Candy?

In the big picture of weight loss it is not what we do on the occasional holiday that really determines our weight it is the week in week out eating and drinking habits that determine our weight.   That being said if you are not careful you can eat/drink a ton of calories in one day which then turns into weeks of too many calories during the holidays starting with Halloween.
The key is to plan and know what you are eating!   Candy can be confusing because of all the different snack sizes that are so prevalent during Halloween.      It is very easy to assume because you are eating snack size candy that it is not that bad, and this is true if you are not eating too many pieces!    Before you eat candy see how many calories you are eating – it takes less than a minute to google calorie, sugar, and fat content for just about any common Halloween Candy.
Here are some examples:
Nestle’s Crunch Bar (60 calories)               6 minutes of brisk aerobic exercise to burn off!
Kit Kat Bar (70 calories)                             8 minutes of brisk aerobic exercise to burn off!
4 Snickers Mini Bar (170 calories)             18 minutes of high intensity exercise to burn off!
Full Size Twix Bar (80 calories)                 6 minutes of continuous kettlebell swings to burn off!
4.2 Oz Candy Corn (450 calories)              4 – 5 miles of walking to burn off!
2 Peanut Butter Cups (210 Calories)          2 miles of running to burn off!
So eating a little candy is no big deal, BUT if you are not watching how many pieces/containers you eat you can quickly rack up a ton of calories that would take more than an hour of vigorous exercise to burn off!

Plan your candy intake and know what you are going to eat and enjoy it!   The other key is have candy after a meal so you are not really hungry – candy and hunger make for a really bad combination!

Rörstrandsgatan Popular Extraordinary Penthouse

Extraordinary penthouse in the popular Rörstrandsgatan.

Extraordinary penthouse
Extraordinary Penthouse
This confidential loft with windows on all sides there is an optimal location in the circumcircle Birkastan. A rarity in the design and location where the architect has planned floor in every detail to create an open atmosphere where the different rooms in a natural way integrated with each other. This floor will host a social get-together in a bright environment with plenty of space by nearly 5-foot ceilings in the ridge and a large sunny terrace right next to the kitchen. Beams are tastefully built and floor is one of few lofts that are not constrained by snetak. 
Well-chosen and thoughtful details include floor heating under beautiful oiled oak parquet flooring and dimmable spotlights throughout the whole apartment. In the living room we find a plastered fireplace with adjustable chimney sat on the black painted fire brick. Modern sound systems are drawn into the walls. Windows are fitted with double glazing which means, in principle, completely eliminated the sound inlet and heat protection glass to keep the floor cool in the summer time. The kitchen is very lavish and signed exclusive German manufacturer Bulthaup. The kitchen is consistently white countertops in the unique composite material is white Corian. The machinery in Alufinish come from reputable Gaggenau. The two bedrooms are furnished with site-built wardrobes and the slightly larger bedroom has both big walk-in closet and bathroom adjacent. Both bathrooms enjoy exclusive furnishings and are equipped with underfloor heating. One of the bathrooms have both shower and bath and the other only shower. Modern washing machines and tumble dryers from Miele. 
Rörstrandsgatan is one of Stockholm’s main restaurant streets with wide range of pubs, cafes and bars. Nearby is also an opportunity to cozy walking and jogging along the Karlberg Canal. Or how about a picnic or playing tennis in Karlberg Palace Park, only a few hundred meters away. Good communications in the form of Karlberg station with both commuter rail and bus service as well as St. Eriksplan underground station.
LivingsRoom
LivingsRoom

BeDroom Design
BeDroom Design

Bathroom Desing
Bathroom Desing

Design Schema
Design Schema

Paperless Mission #6: Setting Up GoodReader (iPad)

This is the sixth post in my Go Paperless! Challenge Series. If you haven’t completed the previous missions, be sure to complete those first.

  • Mission #1: Gather Your Tools
  • Mission #2: Build Evernote Notebooks
  • Mission #3: Email Notes to Notebooks
  • Mission #4: Create Checklists in Evernote
  • Mission #5: Organize Your Files in DropBox

Also be sure to link up at the Go Paperless! Linky. 

Mission #6: Setting Up GoodReader (iPad)

As I’ve mentioned before, I work off a lot of devices. I’m in a 1:1 iPad classroom, but even before my students had access, I had an iPad of my own that I used constantly. I liked having it handy for anything that I was working on, and once I learned about GoodReader, my love for the iPad grew tremendously. I’ve shared some love for GoodReader before, but GoodReader is the ultimate document reader for the iPad. It allows you to read any type of document and annotate over .pdf files. It also syncs with a variety of other apps, allowing you to pull and read all of your important documents into one place.

Once you have your important documents organized on Dropbox, open up the GoodReader app on your iPad. Here, you’ll be able to connect GoodReader to your Dropbox account. To do this,

My documents list already has some items and folders listed, but yours will likely be empty. The left column shows all of the folders and documents you have saved in GoodReader (and could therefore access without an internet connection). The right column has all of the utilities for GoodReader. Today, we’re going to focus on the one towards the bottom — “Connect to Servers.” 
When you click on the “Add” button, you’ll be able to see the many, many connections GoodReader can make. Here are a few highlights:
  • Popular Mail Servers (GMail, Hotmail, etc.) – this connection doesn’t grab all of your emails, but it will allow you to see any messages that have an attachment. This is great for when you’re at a meeting and somebody sends out some documents you need.
  • Dropbox – you can read all of the files that you’ve saved there.
  • Google Drive – view any type of Google Drive file that you have — from spreadsheets to presentations to documents.
The connection set-ups are fairly intuitive. You will need to name each set up (On some screens that shows up as “Readable Title;” I named mine based on what I was connecting to), but then you simply enter your username. You can also enter your password, in which case it will be saved to the device and you won’t have to enter it again, or you can log-in each time you want to access a document.
As you can see from my left column, there are a few folders that I’ve downloaded straight to GoodReader so they’ll always be available to me. These are folders that I’m constantly using and want easy access to. I also have it set up so that they’ll automatically download updates to those folders whenever I add more documents to my Dropbox account. 
Once the folders are set up in GoodReader, you can read the documents, but you can also annotate over .pdf files. I use that feature a lot on my curriculum documents, and I’ve also started doing all of my running records and reading assessments on my iPad. Here’s an example that shows you the annotation tools in the document viewing pane:
I keep my annotating toolbar pinned on the right side, and there you can see a variety of annotation options that are available — typewriting text, creating “sticky notes,” highlighting, underlining, drawing boxes, arrows, etc., and the last option is the freehand tool. I use this for running records with a stylus.
One of the best things about GoodReader is that it works well with other apps. Once I finish annotating a document, I can send it to other apps such as Evernote or Dropbox  from the original “My Documents” screen.

How I Use It

This is one of my must-have apps because of the broad range of ways it can be used:

  • Turn your iPad into a second computer monitor — When I’m using lots of curriculum documents to write unit plans, I can leave it open in GoodReader with all of my notes and highlights while I work on my laptop or computer. No more switching between screens on my computer. (Am I the only one who finds that annoying sometimes???)
  • Highlight standards that you’re focusing on each term without having to print out (or lose) new documents all the time.
  • Annotate rubrics, running records, and other types of student work
  • Use with students to create paperless assignments

I’ll be posting more in-depth tutorials about how to do all of these in future installations of this series, but for now, your challenge is to begin exploring GoodReader. Then, in the comment section, share a bit about how you think this app could be useful.

Spring break starts next week for me, and I can’t wait! I will try to get another installment posted this week, but I make no promises. It’s the end of the term, and that’s always a super-busy time with report cards and grading. I must say, however, that I’m more organized than ever going into this given how much less paper I’m using!

Have a great week!

S-Drive/Crank Cycle Tabata Workout

The S-Drive and Crank Cycle can be used together for a fantastic HIIT Training Workout that is very simple to execute and appropriate for all ability levels!
For the S-Drive portion the exercise is sled pushes so take the belt system off and let it hang from the front of the S-Drive.   Use the sled resistance on the left side of the S-Drive to select and control resistance levels.    You can also use the parachute resistance on the right side to fine to the level of resistance.   
You will be doing a total of 8 sets of sled pushes for 20 seconds of work and 10 seconds of rest, and ideally you choose 4 different hand positions for two sets each at low to high levels so that you change the angle of load/push to create a complete lower body workout!
Sled push exercise video:  https://www.youtube.com/watch?v=wupkFtT69C0
For the upper body portion you will do 8 total sets of Crank Cycle all done standing as follows:
Single Arm Left Cranking – done standing in straddle stance with left leg forward and right leg back with right foot on ball of foot on sloped surface of rear portion of Crank Cycle.
Single Arm Right Cranking – reverse of above
Double Arm Forward Together – standing feet parallel
Left and right crank arms 180 offset – standing feet parallel
Then you flip the locking mechanism to turn the crank tower 180 and lock it down. 
    
Repeat all four of the above in the opposite direction.
For a tutorial on how to use the Crank Cycle see:  http://www.matrixlearningcenter.com/how-to-use-krankcycle/
Workout
Set up a timer for two rounds of Tabata – 20 seconds work and 10 seconds rest for 8 repetitions with a one minute break and repeat.
Start on s-drive doing a set of sled pushes
Then immediately go to Crank Cycle for set of single arm cranking as per above.
Repeat this cycle 4 times changing hand position for each set on S-Drive and changing exercise each set on Crank Cycle.
After 8 total intervals (4 on S-Drive and 4 on Crank Cycle) take a one-minute break.    During the break turn the Crank Cycle Tower 180 degrees as per above.
Repeat another 8 total intervals (4 on S-Drive and 4 on Crank Cycle).  

This workout will take 9 total minutes plus a 5-minute warm-up and cool-down for a total of 19 minutes!   You will not believe the results – perform 1 – 3 times per week with your best effort!

Kneeling High to Low Chop – The Best Core Exercise You are Not Doing!

Core stability is a big buzzword in fitness, and for very good reason.     The ability to keep the core stable is essential for proper movement and prevention of injury.      Stability has three aspects related to the planes of movement:
Sagittal Plane Stability– is the ability to prevent flexion and extension of the core from the low back to the top of the head.
Front Plane Stability– is the ability to prevent lateral flexion of the core from the top of the head to the low back.
Transverse Plan Stability – is the ability to prevent rotation of the core from the top of the head to the low back
Stability is about preventing movement – not creating movement!   All muscles can act as stabilizers, movers, or absorbers, but the muscles of the core spend a lot of time preventing movement in many activities from running to walking to jumping.    This is why exercises like the plank are considered functional because the plank is about using core muscles to prevent movement of the core as opposed to exercises like a crunch which is about creating movement.
To have a strong and stable core it is important to perform stability exercises in all three planes of movement.     The plank and side plank do a great job of challenging muscles to prevent movement in the sagittal and front planes, but that leaves the Transverse Plane.    This is significant because the vast majority of injuries occur in the Transverse Plane with Frontal Plane injuries close behind.
It is also important to note that rotational movement (movement in the transverse plane) is fundamental to human movement in general and the generation of explosive force in many activities from Golf to Tennis to Boxing.
One of the best ways to develop rotational stability in the Transverse Plane is doing high to low anti-rotation chops in a half kneeling position using either resistance bands or cable resistance with a rope handle or pole attached.
Execution

The anchor point of the resistance band/location of the cable handle should be position up high.     Your body should be facing perpendicular to a line from the handle/anchor point straight down and across your body.     You should be in a half kneeling posture down on one knee (the leg closest to the cable/band should flexed with foot flat on the floor and hip and knee bent at 90 degrees.   
The other knee should be down on the floor (use a cushion or mat!) with shin and top of foot along the ground directly behind the knee.   It is important that the knee is directly under the hip.  It is also important that the spine be held straight with a straight line from top of head through the spine and hip to the knee on the ground.    Extend the spine fully and keep your spine fully elongated throughout the exercise.
Reach across the body and place both hands on the resistance band/rope spread apart with hands shoulder width apart.gripping the band/rope.
Keeping the shoulders and hips facing forward the entire time pull the rope/band directly down and across the body and pause in the bottom position making sure there is no movement to in the shoulders or hips while maintaining a fully lengthened spine.   Then slowly return to the starting position.    Form is VERY important in this exercise.
Here are two great instructional videos:
http://www.stack.com/video/3730538400001/elite-performance-with-mike-boyle-increase-core-strength-with-anti-rotation-exercises

http://www.muscleandfitness.com/workouts/abs-and-core-exercises/videos/half-kneeling-stability-chop

Fragrant Pandan Leaves Benefits For Health

FRAGRANT PANDAN LEAVES BENEFITS FOR HEALTH

Fragrant Pandan Leaves Benefits For Health – Fragrant pandan has the Latin name (Pandanus amaryllifolius Roxb.) And includes family Pandanaceae. These plants usually live in marshy swamp or in a moist and shady places. However, because the benefits are big enough for human life, this plant is now cultivated and planted in the yard. For breeding is done by separating the new shoots from the root clump that grows among the roots.
Fragrant pandan benefits for human life is as natural food dyes as well as fragrances. Yes, fragrant pandan leaves give rise to a distinctive aroma. Typically used for the manufacture of cakes and drinks.
Fragrant Pandan Leaves Benefits For Health - 1
In addition to preservatives and fragrance, the plant is also often used as traditional medicine. Which can be used to treat rheumatism, stiff, uneasy and treating nervous weakness.
In addition, the fragrant pandan leaves are also used to a world of beauty as a natural ingredient for hair care. Among others, to nourish the hair, black hair, hair loss to get rid of dandruff.
In every region in Indonesia, fragrant pandan has a name that is different. The content contained therein are alkaloids, saponins, flavonoids, tannins, polyphenols, and dyestuffs.
Fragrant Pandan Leaves Benefits For Health
It has long been used as a fragrant pandan leaf herbal ingredients to treat various diseases. Here are some recipes treatment using fragrant pandan leaves.
1. Treating arthritis
Rheumatism is a common disease suffered by the elderly. Well, people in the olden days when stricken with rheumatic using fragrant pandan leaves to cope.
Way, take 3 pieces of fresh pandan leaves, washed and chopped into pieces. Pour half a cup of coconut oil that is already in the boil while stirring mix well. Once cool, use as a liniment for massaging the sore area.
2. Treat stiff
Hard worker usually often experience stiff body. However, if near your house there is a fragrant pandan plant, can be used to treat stiff you know.
The trick, 5 provide fresh pandan leaf and 20 leaves of lemon grass. Rinse and then pounded until smooth. Add 1 tablespoon oil gandapura eucalyptus and oil and mix well. Use the mixture to rub and massage the sore body parts.
3. Treat nervous weakness
Take fragrant pandan 3 leaves, washed and cut into pieces. Boil 3 cups of water until the remaining 2 cups only. After a cold, drink the potion 2 times a day every morning and afternoon, each one glass for each drink.
4. Overcoming restless
Often the person is exposed to emotional problems so feel uneasy. Usually at night. If you experience this, take 2 pieces of fragrant pandan leaves and then wash and thinly slice. Pour a glass of boiling water. Once cool, strain the water and drink as well. Make two or three times a day until you feel calm.
5. Lowering high blood pressure
For those who suffer from high blood pressure, aka hypertension, fragrant pandan leaves can be used to overcome them. Way, take a few pieces of fragrant pandan leaves and then boiled with three cups of water until the remaining 2 cups. Strain the water, then drink the potion twice a day morning and afternoon.
6. Increase of appetite
Take 2 pieces of pandan leaves, wash and cut into small little. Boil 3 cups of water until the remaining half. Strain the water and drink the mixture two times a day.
Fragrant Pandan Leaves Benefits For Health - 2
7. Overcoming impotence
Besides being used as a medicine nervous weakness, fragrant pandan also efficacious to treat impotence in men. Take three pieces of fragrant pandan leaves, wash and cut into small little. Boil 4 cups of water until the remaining 2 cups. Mibum the concoction twice a day, every morning and afternoon each 1 glass for each drink. Do it regularly.
Benefits Pandan Leaves for Hair
Besides being used as a herbal medicine, fragrant pandan leaves can also be used for hair beauty treatments. Okay, here are a few examples of the benefits of fragrant pandan leaves for hair.
1. Coping with hair loss
Provide 1 pandan leaf, 10 leaves fresh young hibiscus, 1 handful of leaves of Eclipta prostrata, 5 leaves, 10 jasmine flowers, and one rosebud. All material is washed and then insert it into the aluminum pan. Add half a cup of coconut oil, sesame oil and walnut oil. Boil until boiling and then filtered.
How to use, apply this medicine on the hair and scalp evenly and then wrap in a warm towel. Do it at night before bed. The next day a new rinse with cold water and wash as usual. Perform this treatment regularly as many as 23 times a week.
2. Blacken hair
Having black hair shiny and healthy is an asset, especially for women. Proverb says hair is a crown of women. Take 7 leaves of pandanus, wash and cut into small pieces. Boil 1 liter of water, until the water is green. The dew had boiled water overnight. The next day, mix the pandan leaf boiled water with a squeeze of water 3 noni fruit is ripe. Use these herbs to wash it. Perform routine for 3 times a week and see the results.
3. Eliminate dandruff
Dandruff is one of the causes of itchy scalp. The existence of dandruff can damage the health of the hair, for the scalp becomes unhealthy. To overcome this problem is by using fragrant pandan leaves.
Take 7 sheets of fragrant pandan leaves, wash, cut into pieces and puree with a blender way. Add half a cup of water and then squeeze. Strain the water and use to clean the hair and scalp. Allow it to dry by itself. Then rinse with clean water and wash as usual. Perform routine until the dandruff is gone.

Well, that’s fragrant pandan leaves benefits for health and beauty, especially for hair care. Hopefully this article Fragrant Pandan Leaves Benefits For Health are useful and always keep your health.

Multi-Protocol Label Switching (MPLS)

Today the division between routers and switches is a fine line. Whereas switches were initially designed to help segment a LAN into multiple collision domains, and thereby allow you to extend the reach of a particular LAN topology, switches have moved higher up the networking ladder. When switching is used in a LAN to connect individual client and server computers, the process is known as microsegmentation, because the collision domain has been reduced to just the switch and the computer attached to a port. Switches at this level generally work using the hardware (MAC) addresses of the attached computers.

Layer 3 switching moves switching up the ladder by one rung by switching network frames based on the OSI Network layer address—an IP address, for example. But wait, that’s what a router does, isn’t it? Of course. A layer 3 switch is basically a router, but it implements most of its functions in application-specific integrated chips (ASICS) and performs its packet processing much faster than does a traditional router, which uses a microprocessor (much like a computer CPU) for this function.

Internet 2010

When you get to the top of the ladder, where large volumes of data need to be routed through a large corporate network—or the Internet, for that matter—even the fastest traditional routers or layer 3 switches easily can become bogged down by the volume of traffic. Because of this, the core of a large network traditionally has been built using ATM or Frame Relay switches, and IP traffic is sent over these switched networks.

To speed up the processing of routing packets at high-volume rates, a newer technology has been developing over the past few years and goes by the name of Multi-Protocol Label Switching (MPLS). MPLS is covered in the next section.

Combining Routing and Switching

Traditional routers have a large amount of overhead processing they must perform to get a packet to its destination. Each router along the packet’s path must open up and examine the layer 3 header information before it can decide on which port to output the packet to send it to its next hop on its journey. If a packet passes through more than just a few routers, that’s a lot of processing time. Remember that IP is a connectionless protocol. Decisions must be made about a packet’s travel plans at each stage of its journey through the network. The solution to this problem lies in newer technology—high-speed switching. Specifically, Multi-Protocol Label Switching, which is discussed in the next section, combines the best of routing techniques with switching techniques.

When you look at concepts such as ATM or Frame Relay, which are connection-oriented protocols, this isn’t the case. Instead, virtual circuits (either permanent or switched) are set up to connect to endpoints of a communication path so that all cells (as in the case of ATM) or frames (as in the case of Frame Relay) usually take the same path through the switched network.

Benefits Eggplant Netherlands For Healthy Body

BENEFITS EGGPLANT NETHERLANDS FOR HEALTHY BODY

Benefits Eggplant Netherlands For Healthy Body – Dutch aubergine often enjoyed lately for fresh juices and also delicious. Indeed, the benefits to the health of the eggplant is not so pronounced when you took it only once, but for who frequently consume Dutch eggplant you will feel the enormity of the health benefits of eggplant. Dutch eggplant can be grown in tropical regions namely in the area with a temperature of about 20 to 27 degrees Celsius. Growing at an altitude of 500 to 1000 meters above sea level.
Benefits Eggplant Netherlands For Healthy Body - 1
The benefits of eggplant Netherlands is not separated from the womb, such as vitamin A is good for eye health. Contains vitamin C to increase the body’s immunity, Dutch eggplant also contains fiber which is high enough place to constipation as well as create a healthy digestive tract will always be, the benefits provided are also almost the same as the benefits of eggplant purple in general.
Benefit from Dutch eggplant to health can be obtained by juiced as the drink is fresh, not to be eaten immediately because it tastes sour. Young eggplant can be eaten as pickles, and also made syrups and ice cream toppings. etc
Recipes juicing Dutch eggplant

Benefits Eggplant Netherlands For Healthy Body - Juice
Raw material is :
1) 100 grams of eggplant Netherlands
2) 100 grams of red wine
3) 100 grams of yogurt
4) sweetened condensed milk, syrup and honey
5) Shaved ice
How to make :
1) Take all the ingredients and fill the blender, then puree. Leave some red wine as a decoration to drink juice.
2) Enter in the glass dish. Then her glass garnished with grapes, honey, sweetened condensed milk, and syrup.
That is the way to make Dutch eggplant juice. Are you interested to try it. Please just because we This recipe will make you hooked and can enjoy the pleasure of Dutch aubergine. Good luck to make juice from Dutch eggplant that has many health benefits for the body.
Hopefully Articles Benefits Eggplant Netherlands For Healthy Body we share today can be beneficial for you.

Ozzy passed his driving test on his nineteenth attempt back in 2009

But the news today is that at age 69, he’s just had a fender bender, and decided that’s it. Enough.

The following is from his son Jack:

“He had a little bumper kiss on the freeway with someone and he was like ‘you know, I don’t want to drive any more’. He was already driving less and less. I think he is of that mindset he’d rather not have the responsibility.

“Think about it – Ozzy bumps someone and it is like next thing you know we are going to sue for a billion – because people are silly.”

https://www.mirror.co.uk/3am/celebrity-news/ozzy-osbourne-gives-up-driving-12325278

Health Concern: FAT? continue…

How much Fat do you Need?

Very little. Just about any food you can think of contains some fat, and when your diet is made up of at least 75 percent vegetables, fruits, and grains with a few nuts and seeds but without added oils, fats, cheese, or butter, as in the Lifestyle Diet, about 15 percent of your calories will be in the form of fat anyway. This is all you need. The body is capable of making its own fatty acids from the foods you eat with the exception of linoleic acid, and the mere three grams you need per day is more than supplied by eating a couple of tablespoons of sunflower seeds or one small dish of oatmeal. Even leafy green vegetables such as kale or spinach contain about 10 percent of their calories in fat. It is hard to be fat-deficient. Studies of people put on very low-fat diets, even when as little as .7 percent of their calories are taken in the form of fat as linoleic acid, have shown no adverse physical or psychological effects.

Diet Start

Even official bodies have recently begun to recognize the need to reduce dietary fats for the sake of preserving health. The U.S. Senate’s Select Committee on Nutrition and Human Needs recommended in its report “Dietary Goals for the United States” a reduction of fat intake from the present 45 to 30 percent as well as a decrease in sugar consumption to 15 percent of total calories and a corresponding increase in the consumption of complex carbohydrates—the fruits, vegetables, and grains that are the foundation of the Lifestyle Diet. For long-term health and beauty, you should make an even greater reduction so that only about 15 percent of your daily calories are taken in fat.

This is in line with the Pritikin and other low-fat, low-protein diets which have recently caused great interest in both the medical profession and the general public. Pritikin recommends a diet of 80 percent complex carbohydrates, 10 percent protein and 10 percent fat. Although a radical departure from the traditional British, European, and American dietary habits, regimens like the Pritikin diet can not only substantially reduce cholesterol and triglyceride levels, high blood pressure, and high blood sugar, but can also lead to an automatic weight loss and leave people feeling and looking years younger. Such a low protein, low fat diet can also literally beautify a woman both physically and psychically.

At first such a change takes a bit of getting used to, but soon it becomes second nature and the increased vitality, slimness, and good looks it brings you in a few weeks help make it an easy way to eat permanently.

When these are broken down slowly throughout the day, they provide the pancreas with a steady flow of glucose at a rate of about two calories a minute. When you eat something sweetened with refined sugar, the glucose poured into the system (say 100 calories or more all at once) suddenly soars. So does the production of pancreatic insulin in reaction to the insult. When this insult occurs repeatedly, as it does in the usual Western diet, with its average of two pounds of sugar per person per week, the blood sugar levels become depressed, then soar, then become depressed over and over again by a pancreas made trigger happy. In many people this leads to hypoglycemia or low blood sugar, with its corresponding fatigue and mental and emotional symptoms. It can also result in diabetes and in the development of allergic reactions to foods and to petrochemicals, which have recently been linked with diverse mental disorders as well as many acute and chronic forms of illness.

Repeated eating of sugar and products containing it can also result in deficiencies in the B-complex vitamins and an imbalance in certain important minerals. And just in case you are reassuring yourself that you, after all, only eat raw sugar, you should know that one sugar is just about as bad as another. Raw sugar does contain some of the natural vitamins, minerals, and fiber that are found in the sugar beets or sugarcane from which the sugar has been taken but raw, brown, and turbinado sugars are all still highly concentrated simple sugars which create the same metabolic problems as white sugar. As such, they are potential disease-makers. The Lifestyle Diet excludes every form of refined sugar—from chocolate to jams to packaged breakfast cereals with their hidden sweetness. It does allow a little honey for sweetening muesli (two tablespoonfuls a day) plus one tablespoonful of blackstrap molasses if you want it for its nutritional value.

The Best Text for Teaching How to Write and Revise Leads

My fourth graders hate revision. They’re often offended by the mere suggestion that they hadn’t nailed the perfect lead to their stories in their first draft.

I’m used to this. I see it every year in writer’s workshop, especially at the beginning of the year when we’re writing in a genre for the first time.

And every time I see this, I become more determined to break them of this thinking.

Today, we were working on the Common Core State Standard W.4.3a – Orient the reader by establishing a situation and introducing a narrator and/or characters; organize an event sequence that unfolds naturally.

My favorite story to use for this is standard — especially with fourth graders — is The Teacher’s Funeral by Richard Peck.

This book, set in a small Indiana town with a one-room schoolhouse, has the best opening line of a children’s book ever.

If your teacher has to die, August isn’t a bad time of year for it. 

Richard Peck keeps it going from there, building an incredible introduction. You can read the entire first chapter here.

Today, I started our writing lesson by reading this chapter to them. I have the Kindle edition of the book, so when I read it, I can project it on our ActivBoard so the students can follow along as I read. They laughed throughout the intro and were immediately hooked, begging me to choose this as our next chapter book read-aloud. Score one for the objective of “hooking your readers!”

I then asked them how many of them thought that introduction was the one that was in the first draft of his book.

One or two hands went up.

Richard Peck shared in an article called “In the Beginning” (Horn Book Magazine, September 2006, pp. 505-508) that it normally takes him 24 drafts of his lead before he’s happy with it. TWENTY-FOUR!

And here I’m asking my students to take a second pass at their writing.

I shared that little nugget with my students before we reread the first chapter. As we read if for a second time, we focused on the characteristics of his writing that made it such a great lead.

Here’s what my students noticed, compiled into an anchor chart:

Once we finished the chart, I had them go back to a piece of writing they’ve been working on and try to write a different introduction. Some students tried changing the point of view, others jumped into the action or started with dialogue. Whatever the strategy, all of them managed to produce a new version of their introduction, and all were at least a little better than what they’d started with.

We’ll get this revising thing down eventually…

What are some of your favorite books to use to teach students how to hook their readers? I’d love to hear about them in the comments!

For anyone who wonders about the punk music scene… here. Wonder no more. It made no sense to me.

posting this for the Status Quo Nova getting blown up on a tv show…and they blew up a couple orange Novas, at least two, the one you see here, and one at a concert in Pasadena of all places.

For what it’s worth, if you get curious what the hell she’s saying, here’s the lyrics. They repeat, but why bother re-reading.

One, two, one two, FUCK YOU Masterplan, masterplan, masterplan Masterplan, masterplan, masterplan It makes you feel so sure Masterplan, Superman, masterplan It makes you feel secure Masterplan, Ku Klux Klan, masterplan You get down on your knees Masterplan, masterplan, masterplan Can’t tell the forest from the trees

You had it made, you had it made, you had it made but you blew it
You had it made, you had it made, you had it made but you blew it
You had it made, you had it made, but you blew it all away

Masterplan, masterplan, masterplan It makes you feel so sure Masterplan, macho man, masterplan It makes you feel so virile Masterplan, delivery man, masterplan You’d like to rule the world Masterplan, masterplan, masterplan You like controlling minds

for the interview that went with the mini concert:

 The music sucked, but when the lead singer was a young naked woman in shaving cream that melted in the spotlights and sweat… they sold a lot of tickets, and made some money

So yeah, 1st grade lyrics, fast guitars, someone wearing an Easy Rider helmet while playing keyboards. Not high IQ art that gets stared at in museums while some docent explains that the artist was in this or that period of art and how it symbolizes blah blah blah

read the whole article, it’s quite interesting how while seeking fame and fortune, a couple kooks fell in love, hit the big time, disappeared when the ride was over, and made a geodesic dome house in the woods to live with nature.

It’s from Spin magazine, Sept 1998

Preparing for a Paperless Year!

I am in full-blown pre-planning mode. We officially reported back to school on Thursday, and I’ll have 27 fourth grade students in my classroom on August 1. It’s crazy to think about how fast this summer has gone and how much work is still ahead.

This will be the first year that I will attempt to go paperless from day 1. Last year, we only had 1:1 iPads for the last 6 weeks of school, so it was after we had established many of our routines and procedures for the year. As I prepare for this shift, I’m linking up with the Tune into Technology linky to share my plans for management and organization.

Managing the Students

1. Number the technology
I assign students numbers 1-27 on the first day of school. We use these numbers for everything — mailboxes, book bins, lining up, etc. We’ll also use them for the iPads. Each student will be assigned the iPad corresponding with their number, so they’ll always know which one to use and which slot to put it back in when we clean up.

2. Build Classroom Norms and Routines
We’ll develop some essential agreements about the iPads before we even get them out. I’ll let the students decide on the rules, with a little extra guidance as necessary. The items that we’ll need to touch on will include:

  • how to get the iPad out of the cart
  • moving around the classroom with the iPad
  • using the iPad appropriately (following directions, etc.)
  • putting the iPad away
You can read my previous posts on this here and here.

3. Develop a common vocabulary for the buttons and gestures, and teach some basic actions.

We’ll talk about the different buttons on the iPad and their functions. We’ll also talk about how they can be used together to take screenshots and quickly navigate from one app to the next. For more information about how I do this, check out my TpT freebie (the very first thing I ever made for TpT!).

4. Give time to explore
The first writing assignment my students will have this year will be to write an informational piece (either descriptive or how-to) about an app of their choosing. By giving them this assignment, I’m giving them time to play around with the iPad and explore the available apps while also getting a baseline writing sample. This has the added benefit of cultivating “experts” about the different apps among the students.

We actually start school on a Thursday this year, and I intend to get all of this started during those first two days.

Organizing Myself

As I prepare for my paperless year, there are a few items I’m working on before the students even arrive. This will help me be ready to go on day #1.

1. Create a stack of Evernote notebooks for all of my students.

I’m planning to keep all of my conferring notes, work samples, and other relevant data in Evernote this year. To prepare for that, I’ve created an Evernote notebook for each student, and I have them clustered together in a “stack” so that all of my homeroom students are together.
Since I anticipate using this system for many years, I’m formatting the notebook names as “2013 – Last name, First name.” That way, I won’t get confused when I’m quickly looking for the notebooks for this year’s students as opposed to last year’s. I’ve also created one additional notebook called “2013-2014 Overview.” Listing both years ensures that the notebook will be on top of my stack when they’re sorted alphabetically, and I’ll use this notebook to keep track of notes and documents that pertain to the whole class. 
You can read more about setting up Evernote notebooks in my paperless series.
2. Create a checklist template for my class.

This will also be done in Evernote.

I like to have a checklist of my class roster available whenever I’m collecting forms or tracking important information. I’ll make a blank checklist now, and then I can copy and paste it into future notes as needed. This is a huge time-saver down the road for me.

3. Make sure that my Dropbox folders are set up for distributing student work.


Although there are plenty of learning management systems available, I strongly prefer Dropbox for distributing assignments to students just because it’s so easy on my end. All I had to do was create a folder titled “Student Assignments.”

Once the daily folders are set up within the Student Assignments folder, I can share all of the folders through a link on my class website, and students can easily access everything they’ll need for daily assignments. To read a complete step-by-step tutorial for how to do this, check out my previous post.

Since I set this up at the end of last year, all I needed to do was empty out the assignments I gave to last year’s class so that I can start fresh this year.

4. Create a class on Class Dojo.


Class Dojo is an excellent online classroom management app that I’ll be utilizing more this year. I’ll tell you more about how I’m integrating it with my classroom economy in a future post, but for now, all I need to do is input my student roster and print out home access codes for my students and their parents. Then it will be all set to go.

5. Create a new group on Edmodo and prepare a welcome message.

(Edmodo has totally changed its app icon, btw. Check it out!)

I’ll be using Edmodo to collect student assignments, give quizzes, conduct class discussions, and take polls. I’ll need to have a group code ready to give students for the first day so they can sign up, and I’ll want them to have something to see and do immediately when they log in for the first time.

****
Once I finish these 5 steps, I think I’ll be ready to start the year. I have to admit, I find prepping for a paperless classroom far easier than what I experienced in the past. I’m looking forward to going on this journey with my students this year, and I can’t wait to share all of the learning we’ll have in store for us. It’s going to be a fantastic school year!

Can’t wait to read about how others are organizing and managing technology in their classrooms. Be sure to check out the other posts in the Tune into Technology linky, and have a great week!

It’s Not Just You™ – Fallout 4 Crashing with NVIDIA’s SHARE Game Recorder (Possibly Relating To The High Resolution Texture Pack) [Notification, Text-Only]

Updated 2017-06-19: I found one cause of the crashes with SHARE and Fallout 4 (for me) – The HRTP

Just a quick post to say that, if you are experiencing Fallout 4 CTDs (Crashes To Desktop, where FO4 closes without any messages or anything and you are left staring at your Desktop in Windows), I want to let you know It’s Not Just You™ – as I am finding I am experiencing this as well, lately…

I haven’t looked into Forums specifically for this, but perusing Forii off and on over the past year or so, where many are talking about Fallout 4 and Crashing, it seems to happen a lot to people anyway, for just about any reason, unfortunately. I myself wasn’t experiencing this very much though (gladly), until just recently when playing FO4 again [and spending way too much time building up Settlements instead of getting Quests done], I was testing out different Game Recording Programs and started seeing this happen.

I’m happily playing Fallout 4, getting frustrated at the Building mechanics or shooting some Raiders attacking my Settlement, when all of a sudden, BOOM – desktop image and icons. No message, nothing. Fallout 4 has closed itself instantly. I of course start it up again and begin to see where I last hit QuickSave or the game automatically Saved for me – but this has happened a few times in a row now where BOOM – the desktop greets me and icons appear. No message, nothing.

So, I tried to pay attention to what I was doing or what was running as Background Tasks – and the one thing I found, that when I changed it, the crashes stopped happening?.. I was recording with SHARE, NVIDIA’s new version of ShadowPlay, their game recorder that is included with their Graphics Driver. Interesting. I have up ’till now had no issues with SHARE, enjoyed testing it out, taking Screenshots with it and testing out the various Quality settings and forgetting about all of those tests and never writing about it. It seems to have great performance (very small performance ‘hit’/effect) and has a decent amount of options/features.

I then tried some other game recording programs I have purchased over the years, Playclaw, Bandicam, Mirillis’ ACTION, and none of them had any Crashing occur while I was using them (although Fallout 4 didn’t seem to like to start up with Bandicam running sometimes [but when I started the game first then Bandicam, it recorded fine]). Hmph. That’s too bad, I was liking SHARE. There could of course be a myriad of things that could be causing this (I have sometimes run into the game not starting up, with a black screen then shutting itself down again/closing, no matter what game recorder I am using – and again, there are people with high-end Intel CPUs and NVIDIA 1080’s with CTDs…); but for me, it seems to be SHARE, at this time. I might go and mention this in the Official NVIDIA Forum, if noone else has recently. Perhaps this is just a temporary issue in this game and their Drivers, in this version.

I am running NVIDIA GPU Driver Version 382.53 in Windows 10 64-bit, on a GTX 1060 3GB GPU, as of the date of this post.

I know this was a Text-Only post, but I took this screenie of the Driver
Version (so I would remember it) and didn’t want to waste it

I mention all of this because, I was not really experiencing any Crashes-To-Desktop with Fallout 4 prior to thinking of testing out SHARE for a while, just a bit ago. I am Level 42 in the game, after ‘starting out a second time’ and enjoying playing again, taking notes and screenshots for some future posts on it, while I slowly build and shoot my way through The Commonwealth… Where was I? Oh yeah, the crashes. It’s sad, but I want others to not feel alone (you’re not, really, go look up “Fallout 4 crash desktop”..). If you are experiencing Fallout 4 closing without any error messages recently, just letting you know – It’s Not Just You™…


Update 2017-06-19:
For my personal battle with this, I did some more testing and found that I was able to use NVIDIA’s SHARE to record with, for quite a long time (hours), when I disabled/uninstalled the High Resolution Texture Pack DLC…
I am not sure if this is the only related aspect to it (as CTDs happen for even GTX 1080 users and higher capability systems than mine and it happens to those not using the HRTP or SHARE at all), but for now, it seems that this issue may be directly related to that [for me] as it crashes far more often than without running the HRTP – and I have no crashes when recording with other Game Recorders and The High Resolution Texture Pack…

Is it that the HRTP is ‘too much’ for my little 1060 with only 3GB of VRAM and SHARE together? 
Is it related to how the game then uses more RAM (I have 16GB of RAM installed) with the HRTP and possibly a symptom of some RAM issues, perhaps?
I’m not sure of a solution yet, so I cannot say – but if you are experiencing this problem of ‘Crashing while recording Fallout 4 with SHARE’, try disabling the High Resolution Texture Pack for FO4 – it worked for me, just now. (Alternatively, use a different Game Recorder for the time being..). HTH

The carb connection

Carbohydrates are a vital part of the human diet – they are our primary source of energy, and in their natural state they are turned into glucose to provide fuel for all the organs of the body.

THERE ARE THREE MAIN TYPES OF CARBOHYDRATES:

1. Simple sugars, or monosaccharides: glucose (blood sugar), and fructose (fruit sugar)

2. Double sugars, or disaccharides: lactose (milk sugar)

Diet Start

3. Complex carbohydrates, or polysaccharides: starches and cellulose (potatoes, rice, grains and dietary fibre).

The simplest carbohydrate of them all is glucose, which is assimilated immediately by the body. The more complex the carbohydrate’s structure, the longer it takes the body to convert it into energy – so ‘complex’ carbohydrates are the slow burners, because they are higher in more complicated sugars and fibre and thus take longer to break down into energy-giving glucose.

So why are carbs the bad guys?

Even though carbohydrates are a vital component of our overall health, there are certain carbs that serve no nutritional purpose whatsoever, and can even cause us harm if consumed too regularly and in large proportions. They are also the main contributors to the escalating obesity problem. So who are these enemies of our health and weight? They are known as refined carbohydrates.

The problems started the minute we began to process our food and strip out the fibre and nutrients from flour and sugar, to make them look appealingly white. In so doing, we made them nutritionally redundant. Food processing removes magnesium, zinc and chromium from flour and sugar – the three minerals that the body needs to metabolize carbohydrates properly. It also drastically reduces vitamins B1, B2, B3, calcium and iron.

Junk foods made up of refined flour and sugar, plus nutritionally empty processed fats, colourings, flavourings and preservatives, make up 75 per cent of many people’s diets. These so-called ‘convenience foods’ are ’empty’ calories, which hurtle into the bloodstream, play havoc with insulin and blood- sugar levels and actually deplete the body of essential vitamins and minerals that are needed to perform other important bodily functions. Processed foods have also been stripped of their fibre content, which is essential for controlling insulin production and protecting the body against diseases such as diverticulitis and colon cancer.

Why Teachers Love Technology

An infographic about “Why Teachers Love Technology” was recently shared with me, and on the heels of yesterday’s post, I felt like now is a good time to share the infographic with you.

What do we Know Infographic
Graphic from OnlineUniversities.com

Do you love technology? I’d love to hear why in the comments section!

Workout Fuel

WORKOUT ANYTIME “Workout Fuel” Contest on Facebook

We are currently running a contest on our National Facebook page. We are asking fans to share your favorite pre-workout and post-workout snack that “Fuels” you either before or after your workout. Each week we will be allowing fans to comment on a photo, and the comment with the most likes wins a $50 Visa Gift Card! After three weeks we will be putting up all the winners snacks to go head-to-head for a chance to win a $250 Visa Gift Card! 
Make sure to submit your snacks for your chance to win! You can enter this weeks voting here. 

RAINBOW TILES PAINT IDEAS BATHROOMS

The project will have a couple (the artist and engineer) as part of the reform in the basement. Using a hand-painted tiles, have managed to create unconventional looking bathroom bathroom remodeling our basement, my wife and I decided to go all-our home full of color palette, and the result is gloriously bright, fun and happy . When the sun comes up the right window, a bathroom lit with bright and bold colors that scream, “draw a bath and plunge into the rainbow!” The design was founded a couple of words on the bathroom tile ideas that I found around the web, although none of these models had gone far, 34 different shades custom design on the tiles. When I saw this, thought it would be a good idea for children’s bathrooms.

RAINBOW TILES PAINT IDEAS FOR BATHROOMS

RAINBOW TILES PAINT IDEAS FOR BATHROOMS

RAINBOW TILES PAINT STYLE FOR BATHROOMS

RAINBOW TILES PAINT STYLE FOR BATHROOMS

RAINBOW TILES PAINT DESIGN FOR BATHROOMS

RAINBOW TILES PAINT DESIGN FOR BATHROOMS

Source : INSTRUCTABLES

Globesity

THE RISKS FROM OBESITY

Being overweight can induce:

¨ Diabetes (type 2: non-insulin‑dependent)

¨ Coronary heart disease and strokes.

It increases the risks of:

¨ Cancer of the colon, prostate, uterus, cervix, breasts and ovaries

¨ Gall-bladder disease

¨ Musculoskeletal disorders and respiratory problems.

We live in a world where half the population seems to be obsessed by dieting, while the other half is suffering from starvation and malnutrition. We have no control over the natural disasters that leave millions fighting to find enough food to survive, but why is it that so many people — not just in the Western world, but also in developing countries — are becoming overweight, leading to soaring levels of diabetes, cardiovascular disease and certain cancers?

We may have made huge advances in technology, but we seem to have lost our connection to nature, and nowhere is this better illustrated than in the food we eat. Our meat is sold in sterile packaging, and contains antibiotics, growth hormones and pesticide residue. We eat (well, some of us eat) fruit and vegetables that are sprayed, waxed, dyed and sometimes irradiated to make them look attractive. The grains that form the bulk of many people’s diets are stripped of their fibre and nutrient content. And the milk we drink is pasteurized.

Diet Start

Because there is so much choice, so little time and sometimes so little money, many people choose the convenient pre-packaged or fast-food option, rather than insisting on good-quality, naturally produced, locally available produce. They would rather sit and watch a cookery programme on television while eating a TV dinner or a take-out than get into the kitchen and cook a healthy meal for themselves.

According to the World Health Organization (WHO), in 1995 there were an estimated 200 million obese adults worldwide, and by 2000 that figure had increased to 300 million. But obesity is not just a problem restricted to adults -25 per cent of children and adolescents in the US are overweight. The problem is beginning to replace malnutrition and infectious diseases as the most significant contributor to ill health worldwide. Obesity is now recognized as a disease in its own right, but one that is largely preventable through changes in lifestyle – especially diet.

A lesson from dietary history

For years we have been fed the information that a low-fat/high-carbohydrate diet is the healthiest one for us. The ideal ratio, based on our calorie intake, is 55 per cent carbs, 15 per cent protein and 30 per cent fats. This ratio may work for some individuals, but it certainly isn’t right for everyone, particularly those whose carbohydrate intake is based on the wrong sort of carbs.

One of the most thought-provoking arguments for reducing the amount and type of carbohydrates that we eat is the story of Palaeolithic people. Genetically, there is very little difference between ourselves and our hunter- gatherer ancestors, although our diet has certainly changed.

Palaeolithic people were treading the Earth thousands of years before we started to cultivate crops and rear animals for food, and according to scientists they existed on a diet that was primarily protein. Between 60 and 90 per cent of their diet consisted of game animals, eggs, birds, reptiles and insects. The rest comprised green leafy vegetables and berries. Obviously they were leading a far more active life than the average 21st-century human being, but their diet must have been in part responsible for their healthy bones, flawless teeth and good musculature.

It was only at around the time of the agricultural revolution, about 10,000 years ago, that we started to rely on starchy vegetables such as potatoes and cereal crops for the bulk of our diet, and lifestyles became more sedentary. By 4,000 years ago the effects of the change in diet were beginning to be seen in the human body:

¨ There was a reduction in people’s stature

¨ Dental decay and malformation of the jaw had become widespread

¨ Disease and epidemics were starting to shorten the human lifespan.

Deals and Sales: Saints Row 2 and Syberia II, TotallyFree™ [Notification]

Update: As of Sunday, April 23rd, Saints Row 2 is no longer available for Free, but Syberia II still is

I haven’t been feeling too great lately (hence my not posting for a while) – but I wanted to make sure and come and get a quick notification out, for those that don’t know and are interested – that I saw two games being given away TotallyFree™ right now:

Saints Row 2, the open-world, GTA-style Action game is at GoodOldGames (now just GOG, they also offer newer titles these days), found at GOG.com

and

Syberia II, the third-person, mouse-driven Adventure game is being given away at Origin’s “On the House”, found at Origin.com

Both are completely free, so go get them now! GOGOGO

[Note: I do not get any compensation in any form for mentioning these games or companies here (there are no ‘referrals’ or ‘trackbacks’ in the links above); I am just a gamer who likes to share things I figure out and find on my own here, with you, other gamers… Have fun!]

Food Repair Guide: Baking Part 2

Swiss roll

If you are making a Swiss roll, then line the tin with greaseproof paper, but do ensure that you grease the paper well before pouring in the mixture. Try also to ensure that the oven shelf is level or all the mixture will run to one side. If it does, all is not lost, although it will be rather difficult to roll. When you turn the Swiss roll out, do so onto a tea cloth or piece of greaseproof paper that has been coated well with icing sugar. If not well sugared, the Swiss roll will stick to the cloth or paper and you will have a terrible time rolling it. If you have not greased the paper properly, you will also have a terrible time peeling it off, but patience will usually win the day. Do not worry if the roll is not entirely perfect. As long as you can keep about one third of it intact, that will do for theoutside and no one will see the inside. Dredge it thoroughly with sugar or icing sugar. Or, if it has really fallen apart, pre-slice it before serving so that no one can see.

Failed sponge cake

If, despite your best endeavours, your sponge cake, be it light or rich, is dry, crumbly, flat, lumpy or generally unappealing, do not throw it out. If you are desperate for a complete cake or dessert, cut the sponge into very thin layers, sprinkle each with a little liqueur if for a dessert, and layer very generously with filling so that the cake gets smothered. Then top or ice equally generously and no one will ever know. If you do not need the cake too urgently, keep it to make trifles, tipsy cakes or anything that needs a sponge base. Buried deep enough and soaked comprehensively enough, even the most revolting cake will become quite palatable. Alternatively, crumble it and use it as a topping. When toasted, the crumbs can be used as decoration for almost anything in need of disguise.

Diet Start

This does not apply only to plain sponges. Orange or lemon sponges would be a delicious base for any cream dessert, chocolate, coffee or even gingerbread can be used as a base for ‘a trifle with a difference’. Indeed, coffee and chocolate cake could be sliced into fingers, thoroughly dried out in the oven and sandwiched together with some butter icing as biscuits. Any of the above could be used as the base for a baked pudding, but remember that the cake will be sweeter than bread or rice so reduce the amount of sugar.

Failed fruit cakes

Failed fruit cakes are just as adaptable.

Rich fruit cakes often get old and dry out. Do not abandon them to the birds. Cut deep slits in the top of the cake and feed with a mixture of brandy and sherry, or, if you do not want to be too alcoholic, a fruit wine or good fruit cordial. The amount you give the cake will depend on how dry it is, but you can always cut it in half and test the middle.

The same principle can be applied to lighter fruit cakes although one needs to be more temperate. A large quantity of fruit will soak up the liquid and make the whole mixture moist but sponge will merely become soggy, so the greater the proportion of sponge to fruit the less liquid it should be given. It is usually better to ice the cake after it has been — to conceal the tell tale signs.

If a rich fruit cake really is dry beyond redemption, break it up in a bowl, add some suet and a goodly measure of liquor, leave it to soak for 24 hours, then squash it well into a bowl and steam it as a Christmas pudding. It will be a little crumbly and somewhat lighter than the standard, but many people prefer it that way!

Icings

The disaster-prone cook should steer clear of all but glace, butter and royalicing — fondants and their kind are for those with time and expertise to spare.

Glace icing

Glace icing is quick and simple but messy. It is not easy to get the proportion of icing sugar to liquid right to achieve `spreadability’ without `runability’.

Always put whatever you are going to ice on a rack so that the extra can run off without getting stuck in a thick frill round the bottom of the cake. Arm yourself with a pot of boiling water and several metal spatulas or flat knives to smooth out the lumps. Inevitably, the wretched stuff will never quite cover the top of the cake in the first run, and when you add the next bit, the first will have dried and the whole thing will go lumpy. Only practice is going to perfect your technique, but smoothing with a spatula dipped in boiling water does help.

Always be ready to decorate or disguise the top with something other than icing — even if only gold and silver balls. Grated chocolate is a good alternative.

Marbling

Marbling the top, if it is reasonable, will distract the eye from any minor blemishes and is easy and impressive in itself. Run a little melted chocolate, or different coloured icing, in parallel lines across the top of the cake. Then, before it is dried, take a knife point and pull it across the cake top in straight lines at right angles to the first lines, thus pulling the lines into a feathered shape. Try it a couple of times on greaseproof paper before you launch into the cake.

If all fails and you make a complete mess of the icing, wait till it is dry, then scrape the whole lot off and start again.

Butter icing

Butter icing is the world’s easiest, but it is very rich. Many people prefer to use shortening as the fat base, which keeps it much lighter. The only hazard with butter icing is to get enough flavour into it. Like brandy butter (which is, of course, only a butter icing) nothing is nastier than a butter icing that tastes like sweetened butter. Therefore, taste after you have followed the recipe. If you have used a particularly strongly flavoured butter, you will need more chocolate, lemon or whatever you are using. Never try to spread it straight out of the fridge.

Royal icing

Royal icing is also simple, using egg white rather than water or syrup to moisten the icing sugar. Add a little lemon juice to counteract the sweetness and do not forget a drop or two of glycerine to prevent it hardening totally. If you do have a cake with unglycerined icing, you would be better advised to saw your way through it with a bread knife rather than to try and cut it, when it will shatter and ricochet all over the drawing room and Great Aunt Ethel. Royal icing can always be broken off and replaced with a new batch. Use a small amount of icing to experiment with the colour.

Health Benefits of Carrots For Body

HEALTH BENEFITS OF CARROTS FOR BODY

Health Benefits of Carrots For Body – Vegetables that this one is very commonly known by various groups in society. In addition to its benefits as vegetables, carrots and radishes are also very nice to be a healthy drink or juice. According to the classification, Carrots here still belong to the kingdom Plantae or plants classmates. As well as Latin or scientific name is Daucus carota given. in how to consume, carrots can be eaten in its raw state or through the cooking process in advance (cooked). So it all up to you, depending on the tastes and preferences of each.
Health Benefits of Carrots For Body - 1
Well most frequent question here is: What are the nutrients or nutrients in carrots? and what are the benefits and efficacy can be obtained for health? because the question was, here we will try to share the knowledge that may help you in gaining insight into the benefits of the drug contained in carrot vegetable.
Nutritional content and nutrients in carrots is also able to say quite a lot. And between which we can pass are: Vitamin A, vitamin B1, B2, B3, B6, B9 and C, Calcium, Iron, and Magnesium, Phosphorus, Potassium, and Sodium.
Health Benefits of Carrots For Body - 2
Benefits And Carrots For Health Benefits:
1) Lowers cholesterol levels in the blood.
2) Can Launching of the digestive system, especially for constipation or difficult bowel movements.
3) Can Prevent cancer or tumor cells develop in the body.
4) Can also Maintaining eye health and to clear the view.
5) As a natural antioxidant substance that is able to ward off free radicals.
6) It can also strengthen bones as well as joints and teeth.
7) Can Treat anemia or lack of blood.
8) etc.
That is little information that can be given, perhaps on another occasion, we will update as well as update the information in order to more fully and more easily understood and to understand. A few of Health Benefits of Carrots For Body As well as this, may be helpful and useful for people. Thank You.

Word Nerds Book Study – Chapter 7

By the time you read this, I will be officially back to work.

Yes, you read that correctly. My preplanning started today, and I will have students in my classroom on August 1st.

I’ve been super-busy preparing my classroom and wrapping up summer projects (and lamenting the number of projects that I never even got started). I’m looking forward to sharing more about that in the next couple of weeks. Today, however, I’m excited to participate in the book study of Word Nerds. This book study is being hosted by Sabra at Teaching with a Touch of Twang, and I would definitely encourage you to check out the previous posts at her blog and link up. This is a fantastic book for improving vocabulary instruction.

Chapter 7 – Spreading Vocabulary Wings

This chapter is all about additional classroom activities that can enhance students’ vocabulary understandings. The authors make a few key recommendations.
1. Extend Vocabulary Through Morphology
Encouraging students to analyze affixes and roots can build their confidence as they tackle more multisyllabic words. Start with the most common prefixes (un-, re-, dis-, etc.) and build from there. Once students have experienced a few weeks of studying Greek and Latin roots, they can participate in a “Crystal Ball Word” activity in which they look closely at a word’s morphology to predict its meaning. For example, with the word “transportation,” students can break it up into “trans-,” “port,” and “-ation” and think of all the words that use the same prefix, root, or suffix. They discuss word connections as they make lists of related words, and from this one word, the students in the book were able to think of 41 words that share a similar morpheme! These sorts of word attack strategies are valuable to students as they tackle new vocabulary on their own.
2. Connect Background Knowledge and Facilitate Comprehension
Drawing on the comprehension strategies of making connections, this section highlights how important it is for students to be able to have a variety of experiences with words when they’re trying to make sense of a complex text. For example, as students are attempting to make inferences from the text, they should be explicitly coached to add vocabulary words to make connections based on clues from the text and the student’s background knowledge. This gives students an opportunity to practice using the new vocabulary and adds additional layers of meaning to the words they’re learning. This could be an especially useful practice if you’re trying to connect literature with content vocabulary. The example in the book highlights how some relevant social studies vocabulary (immigrant, culture, destination, etc) could be applied and connected to the book Grandfather’s Journey by Allen Say.
3. Extend Vocabulary Development with Children’s Literature
Picture books, with their shorter texts, less complicated plots, and amazing artwork, can be tremendous resources for teaching reading strategies. The authors highlight why this is also true for vocabulary instruction, and they highlighted several vocabulary-rich children’s books that could be used. Here are a few of my favorites:

Pirate Pete’s Talk Like a Pirate by Kim Kennedy tells the tale of a pirate who is looking to build a crew. But while Pirate Pete talks in “aargh’s” and plank-walking language, the rascals he’s recruiting talk in very sophisticated sentences with eloquent vocabularies. This may be used as a metaphor for how we want to elevate our students’ writing and speaking away from “pirate-talk” and into the more elevated words of the rascals. Students practice revising sentences from pirate sentences into rascal sentences, and after several days of study, students can have a “Pirate Party” where they compete to “Talk Like a Rascal.”

13 Words by Lemony Snicket takes 13 seemingly unrelated words and interweaves them into an amusing story. This could be a template for a student writing assignment which would require students to select 13 unrelated content vocabulary words and tie them into a story in the style of Lemony Snicket. I’m looking forward to trying this activity with my own students.

Baloney (Henry P.) by Jon Scieszka and Lane Smith tells the tale of a boy in space who is late for school and needs to come up with an excuse for his teacher. As he describes his adventures, he inserts a bunch of words that sound like nonsense words (szkola, zimulis, etc.), but they’re actually words from different languages. This is a great book for introducing strategies for teaching context clues.

Max’s Words by Kate Banks is a great story for building word consciousness among students. It tells the tale of a boy who begins collecting words cut out of magazines and newspapers. He eventually realizes he can rearrange the words into stories, and he becomes the envy of his siblings.

The Odious Ogre by Norton Juster tells the tale of an ogre who has an extensive vocabulary that he uses as he terrorizes the town. Given the number of multisyllabic words incorporated in the text, it could be easily incorporated into studies of Greek and Latin roots and morphemes.

Word Nerds has so many great suggestions for easy ways to incorporate vocabulary instruction. These books were just a few of the ones mentioned, so I would recommend reading this chapter for some additional ideas. And be sure to visit Teaching with a Touch of Twang for additional suggestions and insights in this fabulous book.

Back to pre-planning! Thanks for visiting!

Disclosure of Material Connection: Some of the links in the post above are “affiliate links.” This means if you click on the link and purchase the item, I will receive an affiliate commission. Regardless, I only recommend products or services I use personally and/or believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

Becoming a GI Joe

All carbohydrates have a value on what is known as the `glycaemic index’ (GI), which indicates how quickly that carbohydrate is metabolized by the body and converted into glucose. The lower a food’s GI, the longer it takes to be converted. Foods with the highest GIs are the ones that will have the most profound and immediate effect on your blood-sugar levels. All the carbohydrates on a weight- loss and insulin-balancing regime should come from the lower ranges.

There are two indexes: the glucose standard, which rates glucose as having a GI of 100 and the white bread standard, which is based on white bread being equal to 100. Other carbohydrates are assigned comparative ratios based on these figures. It doesn’t really matter which index you adhere to, for they both give a pretty good – and sometimes surprising – insight into the speed with which certain carbohydrates are assimilated into the bloodstream.

Diet Start

Below are a few GI values of common foods, based on the glucose standard. Of course you are not expected to remember each specific food’s value, so to make things easier, opposite are two simple tables showing you how to classify fruit and vegetables into those with a low GI value (under 20), those with a medium value (20-60) and those with a high value (over 60).

Density values

Each carbohydrate can also be evaluated by its density value. This is the amount of usable carbohydrate in relation to fibre and water content – the more fibre and water a vegetable or fruit contains, the less usable carbohydrates it will have. The most dense carbohydrate foods are pulses, wholegrains and starchy vegetables, particularly when they are cooked and their fibre is broken down, these will raise your insulin levels, so always be aware of this. The table opposite contains a list of low-density carbohydrates that should form the basis of your carb intake on a low-carb diet.

Not only do many fruits feature highly on the GI scale, but a few should also carry a carbohydrate density warning sign. Bananas, dried fruit and concentrated fruit juices are all a bad idea if you are trying to balance your blood sugar levels. It is best to avoid these totally until your blood sugar and weight have normalized, and then carefully re-introduce them into your diet.

Focus on fibrous vegetables that can be eaten raw or steamed – the type that lose a lot of water whilst cooking. This will mean increasing your intake of leafy green vegetables, such as Swiss chard, green cabbage, kale, bok choy, rocket, spinach and endive.

Workout Anytime in Sumter’s The Item

Workout Anytime in Sumter’s The Item in an article titled, “Workout Anytime opens facility in Sumter.” The article begins with details about Workout Anytime and the excitement about opening a location in Sumter and the proximity to Shaw Air Force Base. The article then goes into additional detail on the features and equipment available at Workout Anytime, as well as the individualized attention that members receive. The article finishes with information about the fact that over 700 members have already signed up and the hometown connection for Steve Strickland, and then gives the contact information for the club.  Click here for the entire article or begin below.

Workout Anytime opens facility in Sumter
By: Jamie H. Wilson

Workout Anytime Sumter, a business that aims to provide its members with 24/7 access to its gym facilities, is now open.

“We are excited to see others change their lives,” said co-manager Victoria Streetman.

The month-to-month payment option sets them apart from other similar 24/7 workoutfacilities, said company officials. Basic membership is $15 and affords members gym access to any of the corporation’s facilities nationwide. Premium membership gives members access to the same facilities as well as amenities such as tanning, hydromassage and unlimited guest privileges.

(Read More)

My Trip to Male, Maldives, September 2010

The trip to Maldives was a business development trip. Most people just come to Maldives and stay in a resort and go back. I was lucky to see the Maldives by land, sea and air; as well as spending time in Male. I recommend all to see Maldives in all its glory

View of Water Villas.

View of Maldives by Air (Sea Plane)

Not only did I snorkel but I also went on the “Whale Submarine”

As a sprawling archipelago Maldives (I traveled from Male to the northern most inhabited Island and back to Male) is a breathtaking destination. However, I was shocked to see poverty in the Maldives with a population of just over 300,000. I guess corruption and discrimination is rampant in this tiny nation as well. I must say that Maldives presents a unique problem to any government in having to deliver services to small populations spread across 200 islands (Out of 1192 Islands spread across 90,000 square kilometers)

I believe the only solution is to embrace ICT and use it to reach every person. However, having said that; the ICT literacy among the Maldivian population is also very low. A real chicken or egg situation for the politicians of Maldives to solve. If ever there was a country which can be considered easy to develop it must be the Maldives.

Fallout 4 – Screenshots and “Portraits”, Part I (SweetFX in ReShade) [With Added Example of Before and After]

[Update 2016-12-05: I think it would be ‘more exciting’ to see the Before, since these are all the After (the effects were turned on) – I shall come back to this and post/add the Before pics (the in-game unmodified versions), Soon™]
[Update 2017-02-17: I have added an animated GIF showing the Before and After applying my SweetFX profile, configured in ReShade, for one of the screenshots (“Mrs.Nordhagen, Settler II”)]

Slowly doing more and more after a harder time with Colds/Flu/etc, I have been having a ton of fun with Fallout 4, ever since I received it as a gift from My Better Half recently when it was on sale – so much so, I can’t tear myself away to do a First Impressions on it, I am playing with every bit of energy I get… Although I find myself mainly enjoying just building up my Settlements [as opposed to getting Quests done out in the ruined world, I have managed to take a multitude of Screenshots – and while Fallout 4 does not seem to be a miracle-laden, leaps-and-bounds, rocketship-flight, leap-ahead in graphics advancement from Fallout 3 [it seems to be a heavily modified/improved FO3 Engine], it is still quite beautiful, with the potential to be immensely so. Not a clean-and-crisp representation of a post-apocalyptic future [to my own delight] debris is strewn everywhere in both outdoor and indoor scenes/areas, accented by Shader and Post-Processing Effects galore…all while trying to maintain a lower polygon count [‘complexity of the shapes’] for Console (and Desktop) performance. If you are able to turn things up (and don’t mind the relatively sluggish performance drops) this game can truly become a Screenshot-Taker’s Paradise…

I have so many Screenshots already from it that I want to start sharing them all – but first, here are just a few, of what-I-am-calling “Portrait” [‘photo-style’] captures that I was able to take, captured in-game with the ULTRA graphic Video Setting (tweaked slightly), with filtering done by SweetFX in ReShade, utilizing my own configuration/presets/profiles (these Presets are configured with high amounts of Sharpening, Grain and Colour Grading (shading/colour-correction) to produce a darker, grittier look overlaying the game textures). Other than the Picture Frames for the ‘portraits’ below (those with text) and The Blog logos/watermarkings on all of them, no heavy editing in these (colour changes, etc.) were done outside of the game (“this is how it looks in the game, once you take the Picture Frames or Logos away”) – the faces especially, are completely untouched and are how they looked in the game itself… For those interested in reproducing these looks, all SweetFX/ReShade profiles I create/configure will be made available here for all to use, once they are finalized…Soon™


[I am also going to share these Screenshots and ‘Portraits’ (images with border and text added) at Flickr and through Steam, eventually. I hope everyone enjoys them all!]

And now… a few ‘Portraits’ and some Screenshots, all taken using SweetFX at the time:

Although I am mostly just building up my Settlements [as opposed to getting Quests done out in the ruined world heh], it is exposing me to the Settlers and their personalities… These “Portraits” [bordered, with green ‘Pip-Boy-style’ Text] are an expression of those interactions, what I think their personal qualities/goals are (from what I have been exposed to thus far) and my enjoyment of it all… I hope you enjoy these little ‘representational snippets’ of their lives….

Fallout 4 “Portraits” – Preston Garvey
Captured in-game running ULTRA Settings, no Mods, filtering done with SweetFX in ReShade, text andborder added
Click to see Full Size
Fallout 4 “Portraits” – Marcy Long
(Captured in-game running ULTRA Settings, no Mods, filtering done with SweetFX in ReShade, text and border added)
Click to see Full Size
Fallout 4 “Portraits” – Sturges
Captured in-game running ULTRA Settings, no Mods, filtering done with SweetFX in ReShade, text and border added
Click to see Full Size

“Mama Murphy, can I take a picture of you?”
“Oooh I dunno kiddo, noone’s gonna be interested in lookin’ at ol’ Mama Murphy, years from now… Besides, I haven’t been to a salon in, oooh, I dunno how long…”
“Nonsense, Mama. You look fine. You have a special type of beauty I’d like to capture… Please?”
“Oooh alright… Just be sure to get Mama Murphy’s ‘good side’, heheh….”


Fallout 4 – Mama Murphy “From Photo Shoot I”
Captured in-game running ULTRA settings, no Mods, filtering done with SweetFX
Click to see Full Size

Fallout 4 – Mama Murphy “From Photo Shoot II”
Captured in-game running ULTRA Settings, no Mods, filtering done with SweetFX
Click to see Full Size

Although it was hard to get a ‘photo-style’ angle, interacting with Mrs.Nordhagen (of Nordhagen Beach, Mass.) over and over eventually yielded this somewhat ‘candid’ shot of her and her husband, after ‘talking’ to her a number of times to get her to turn around – it was worth it to me, as these next two shots were the result… Lots of filtering was configured in SweetFX, having heavy sharpening and adding lots of colour grading, with a slight vignette [TV style] and Filmic passes, all done with SweetFX via ReShade.

Fallout 4 – “Mrs. Nordhagen, Settler I”
Captured in-game running ULTRA Settings, no Mods, filtering done with SweetFX
Click to see Full Size

Fallout 4 – “Mrs. Nordhagen, Settler II”
Captured in-game running ULTRA Settings, no Mods, filtering done with SweetFX
Click to see Full Size

Fallout 4 – “Mrs. Nordhagen, Settler II” (with and without SweetFX applied), Half-Size GIF
Captured in-game running ULTRA settings, no Mods, filtering profile configured with SweetFX in ReShade
Click to see Full Size

[I have so many screens already… but I have to get them ‘prepped’ for Upload and between still being ‘slow’ – but still trying to enjoy the game as much as I can (taking Notes for a First Impressions post, with Tips, And More!) – the rest will have to come in increments (“Parts”). For now, I hope you all enjoy these though. Take care.]



ReShade by Crosire (reshade.me)
SweetFX by CeeJay.dk (ceejay.dk)
Game Material by Bethesda Game Studios (bgs.bethsoft.com)
Captured/Edited by Troy from The Game Tips And More Blog

WORKOUT ANYTIME in Club Industry

WORKOUT ANYTIME in Club Industry

In an article titled, “Reaching Landmark 50 Gyms Open, Workout Anytime Prepares for Rapid Acceleration in 2014” features WORKOUT ANYTIME’s 50th club opening. Along with opening their 50th location WORKOUT ANYTIME is looking at rapid growth acceleration through the 2014 year. WORKOUT ANYTIME’s CEO and co-founder Steve Strickland outlines a few important development metric’s of the year such as in 2013 WORKOUT ANYTIME doubled in locations.
You can view the full article here. 

1st I’ve seen or heard of a GM supercharger on a 1958 Corvette

Cellulite Breakdown and Essential Detoxification part 2

Beware the Heavy Metals

Whether or not you go for music of the same name, heavy metals in your body are something you want to get rid of. These elements, the concentration of which has increased dramatically in our air, foods and water since the Industrial Revolution, can seriously interfere with your body’s metabolic functioning and thus challenge its wellbeing. Mercury tends to suppress the levels of white blood cells involved in the immune response. Cadmium displaces the essential element zinc needed for a great many of your body’s enzyme systems and renders them inefficient and even inactive (including those that build new collagen and elastin for skin and connective tissues). In the West we now have a concentration of lead in our bodies some 500 to 1,000 times that of our pre-technological ancestors. High levels of this heavy metal age us prematurely, interfere with our mental processes, suppress immunity and contribute to depression. Aluminium, another heavy metal, detrimentally affects the central nervous system. It has recently been associated with the development of pre-senile dementia or Alzheimer’s disease.

Diet Start

The presence of all of these elements in excessive quantities (and their concentrations in the human body appear to be increasing with each passing decade) generally interferes with the metabolic processes on which good body ecology and therefore the absence of cellulite depends. It is important to do everything you can to eliminate them from your body. (The alginates, forms of fibre found in seaweeds, also chelate heavy metals and adding sea plants to your diet on an ongoing basis is a good idea, after your applefast is finished.) You also need to be aware of ways you can protect yourself from allowing heavy metals to build up in the first place. Here are a few suggestions:

  • Steer clear of tobacco smoke and exhaust fumes
  • Don’t buy fruit or vegetables from shops in the street where they have been exposed to leaded exhaust fumes
  • Don’t cook in aluminium pans
  • Eat plenty of fibre and nutrient-rich vegetables and fruits.

More Than An Apple A Day

Now let’s get down to the programme. An applefast can be done by any healthy person provided of course your doctor agrees. It was taught to me twenty years ago by Dr Gordon Latto, a British medical doctor who uses nothing but food and breathing and a few herbs to heal even the most complex and chronic conditions. He is almost 80 and one of the most remarkably healthy and vital men I have ever met. The applefast lasts for two or three days (never more, except under doctor’s supervision). You eat only raw apples — as many varieties as you want — for breakfast, lunch and dinner as well as in between. Eat all you want, but chew well and always crunch up the seeds too. They contain valuable nutrients that help the process.

During the applefast you need to give up all tea and coffee although you may have as much mineral water or herb tea made with mineral water as you please, sweetened with a little honey if you prefer. The best herb tea of all for The Breakdown is solidago or golden rod which you can get from a good herbalist. Like nettle, it has natural diuretic properties to help shift some of the stored water in your tissues but, unlike nettle, it actually tastes pleasant.

Don’t be surprised if you suffer the odd headache during this dynamic two or three days clear out. (Especially if you have been a dyed-in-the-wool coffee or tea drinker.) This is a sign that the whole process is happening rapidly. If you do, then take a 20-minute epsom salts bath and lie down in a darkened room to rest for 15 minutes afterwards. (More about this in a moment.)

External work on your body is important too to trigger the detoxification process. Start now to incorporate skin brushing into your daily routine. After the applefast is over continue doing it but begin to use other techniques as well to enhance lymphatic drainage, to help break up hardened connective tissue, and to keep the detoxification process going while you are rebuilding new, strong connective tissue and ground substance.

Fallout 4 – “Starting Out: On Settlements, Building, Crafting, Materials And More” – A Beginner’s Guide of Tips and Concepts to Settlement Building and Development [UNDER CONSTRUCTION]

Update: Added images for Main Concepts sections (Food, Defense, etc)
Update: Added steps for How To Assign a Settler to a Work Station/Shop/etc
Update: Added how to Give Yourself Any Building Components, or Food, with Commands (Cheats Section)
Update: Added how to Build past the Size Limit in Settlements (Not a Cheat, Doable on Console as well as PC)

[Note.: This post is ‘LIVE’ and ‘UNDER CONSTRUCTION’, as I continue to add more data and Tips and Example Screenshots to it… I decided to make it available now however, to assist those playing Fallout 4; especially those just starting out – seeing as there is a Steam Sale on now (go get it! heh). I will be adding more Text and Tips and Screenshots and More and this post cannot be considered ‘finalized’ until after I add a ‘Final Footer Image’ to the posting (see some of my other posts for examples of this type of ‘end image’ I put in my posts). Please excuse changes as they occur and temporary mistakes and spelling errors, which may show up should you return to this article while it is under development. Enjoy, however – I hope you find something helpful to you – and have fun in Fallout 4!]




I have been having a ton of fun playing Fallout 4 lately… and while I am taking forever to finish up a ‘First Impressions’ of the game [I keep playing and building up my Settlements instead of writing!], I wanted to share some Tips on handling Settlements; some concepts and ideas that might help new users to the game, players that may not have developed their Settlements very much yet, or players that are looking for ways to possibly improve or increase their Settlements and their Production and associated benefits (Bottlecaps income from Stores, Settlers roaming around and finding/providing you with Supplies, Clinics for healing and removing Radiation, and more).

Screenshot showing the Workshop Area of The Sunshine Tidings Cooperative, Decorated (Work In Progress).
(High Resolution Texture Pack enabled [not 100% sure, sorry, but I think it was at this time]
The Automatron DLC Robot Workbench can be seen, center background. Minuteman Flag seen, left wall, foreground)
Click to see Full Size

[Settlements and their development and growth is one of my favourite aspects of the game, not only because it supplies you with Junk/Scrap/Materials to build with and Money as well, but also because of the ‘life it breathes into the game’… every Settlement becomes ‘alive’ with people coming and going, working and resting, asking for help or talking amongst themselves around you. After getting a few Settlements set up and running smoothly, they become a place to restock, sell and collect, modify and improve gear, rest and maybe enjoy some scenery, taking a break from the action by building and re-working, improving and creating a place of solitude and pride, in each little ‘town’ in The Commonwealth…]

Example of the Workshop Mode interface bar, normally seen at the top of the screen in Workshop Mode (Building mode)
Click to see Full Size 

Here then, are some main ideas to start off with or to keep in mind  – hopefully helpful to fellow gamers who are either starting out in Fallout 4 [from the latest Steam Sale], or are looking for ways to improve their currently-undeveloped Settlements (colour-coded somewhat-by-importance to help separate them for easier reference):

1.  In the very beginning, build Food and Water and Beds, as much as you can.  

These three things (Beds, Water, Food) are the main limiting factors to how many people will come to live in a Settlement. 

 [The maximum amount of people that can ‘live in your town’ is supposed to be your Charisma+10 (so if you have 5 Charisma, that would be 15 people); Provisioners who run Supply Lines (more on them later on down further) don’t seem to count towards this calcuated total (by my experience so far). Also, this limitation is stated in many places online – however, I have Settlements that are much higher than this number (over 30!) so I have not finalized the concept of Settlement Limitation Amount, at this time] 

Don’t worry about Guard Posts and Turrets, at least, as much as you might think at the start – because although they do help with the overall safety of your Settlement; reducing the amount of Raids that occur, reducing the amount of Damage that will be sustained in the Raids, and setting a higher Security rating (which seems to affect Happiness, but not Immigration rate – more on Happiness later on…) – you can actually put the responsibility on yourself to take care of Raids at first [and get the bonus experience and loot that comes with it!] by Fast Travelling to the Settlements as soon as you see the ‘Help Defend’ tasks come up – or making ’rounds’ between your Settlements as they are starting up, as Raiders sometimes attack while you are there and you can then help clear them out – and get all the Loot they drop, too! 

[The game leads you towards building Turrets at your Settlements near the beginning, too – in the form of a ‘tutorial’ of sorts, somewhat-early on]


2.  Plant any Food (Corn, Tatos, Mutfruit, Gourds, Watermelon and Razorgrain) you find, at first.

Starting out, you want to maximize your growth, so re-planting food you pick up not only increases how much food a Settlement can produce/feed for the Settlers, it also multiplies how much you can harvest!

You can harvest any plants by ‘picking them’ (hitting the Action key while close to them). You can then immediately re-plant the food you just picked, by entering Workshop Mode and going to the Resources>Food section.

A while later, you can start to Cook with your Food – not only do the meals you prepare have special bonuses (they are all different!) but boiling up some VEGETABLE STARCH, made from all materials that you can gather at any Settlement, is a great way to create your own Adhesive building material. Used for almost everything, Adhesive is a very important material to have!



Vegetable Starch, a source of Adhesive, you can create yourself by cooking together Corn (3), Mutfruit (3), Tatos (3) and using Purified Water (1). Purified Water, you can either find as you travel, cook yourself [3 Dirty Water can be boiled up to make 1 Purified Water], or use Water leftover from your Water Sources in your Settlement – as any extra Water that is not used by your Settlers will be ‘kept by the Settlers in the Workshop inventory’ [in the Workshop Bench]. You need Adhesive for Modifications to Weapons and Armor and even for Building – it is used for almost everything and is therefore very important to keep stocked!




3. Tied for the third most important thing/things to start thinking about, are these two concepts:

    • As you can, increase your Turrets and Guard Posts, to increase the Security of the Settlements, and as stated above, reducing the amount of Raids that occur, reducing the amount of Damage that will be sustained in Raids, and keeping your Settlers ‘feeling secure and more relaxed’ (Happier), too. 

    Although the Security Rating of a Settlement (“Defense”) does not effect the speed at which Settlers will immigrate to your little town, the Defense Rating of a Settlement affects the Happiness Rating – which affects how ‘Productive’ the Settlers are in that Settlement (speed of gathering resources, amount of Caps earned, etc) – more on Happiness later on…

    If you have more Guard Posts than you have assigned Guards, they will ‘patrol’ around the Settlement, going between them, back and forth. If you have the same amount of Guard Posts to Guards, they will each stay at one, standing ‘on guard’, most of the time.

    [I personally like to have a couple extra Guard Posts created in my Settlements just to have the Guards move around more… It creates more movement in the Settlements overall and makes them ‘feel more alive’ – something I really like in my Settlements!]

    • Build extra Scavenging Stations as your Settlement grows, as your Junk/Materials allow you to, so as the Settlers keep flowing in, you can assign them to the empty Stations – concentrating more on Scavenging over time will get your Settlers working and searching around, bringing you any Junk Items they find, “automatically” for you to then use!

    Scavenging Stations are assigned to Settlers, who then start wandering the Settlement randomly, picking up Scrap and Junk items they find and placing them in the Workshop over time – they will even ‘break down’ the items at the Scavenging Station – and you can watch them do it! 

    [If you have the Automatron DLC/Expansion, you will find that robots Assigned to Scavenging Stations will simply stand next to the Station with no animations occurring (sadly)]

    ‘How do you Assign Settlers to Scavenging Stations?’
    Further down, there are Steps with Screenshots for each,
    in the Section “How To Assign Settlers To Work Stations”


    After a while, with more Settlers coming in (sometimes they will migrate to your Settlements quite fast, seeing a solid place to find food, water, beds and have some security/safety), you’ll start to see Junk/Scrap/Materials pile up slowly, even Bottlecaps flowing in, sitting there waiting for you in the Workshops of your Settlements. 

     [If you have extra Food/Plants/farming and Guarding that needs to be done, Settlers seem to assign themselves to those first, if you haven’t been by to visit in a while to ‘tell people what to do’ – I have returned to Settlements to find New Immigrants that have started Farming or standing at Guard Posts on their own – but I have yet to see Settlers that Assign themselves to Scavenging Stations]

    Don’t forget to ‘make your rounds’ and periodically travel around to check all of the Workshops, grabbing these extra ‘Caps and ‘Mats, snatching-up the extra Purified Water you’ll see in them, to sell for even more Bottlecaps (especially if you are more desperate for money sometime). Purified Water is created by extra Water production of the Settlement; water that the Settlers aren’t using from the Sources you have set up. This extra Water gets placed in the Workshop for general use and Supply Line provisioning to other Settlements – but since it sells for a decent price and ‘piles up for free’, grab it and Sell it, if you really need ‘Caps!



    4.  As you find more Settlements, start up Supply Lines between them all…

    Supply Lines are ways to ‘share’ the resources of the Workshops between Settlements. You assign a Settler to create a Supply Line between two Settlements, and they then become a “Provisioner”, leading a Caravan between the two Settlements, taking supplies between them so that you can effectively ‘use the Junk/Scrap/Materials/Components of both of them’, no matter which one you are in!

    Supply Lines are started by entering Workshop Mode, then going up to a Settler (one that is Unassigned with no ‘job to do’, or one that you want to make run a Supply Line instead of the job they are currently assigned to) and choosing Supply Line from the bottom menu bar.

    That townsperson will then become a Provisioner, leading a caravan and a wacky Brahmin through the wilds of The Commonwealth… between the Settlement that they originated in and the one that you assigned them to make a Supply Line to.
    Between these two Settlements then, you can utilize any* Junk/Scrap/Components between them, in their Workshops.

    *Note that it appears you cannot share any Weapons or Apparel that you put in [I have not tested Miscellaneous items yet]; you can only share Junk [as of the time of this posting, this may change in a future Update/Patch in the game, of course].

    Requirement: Supply Lines require the Local Leader Perk to be able to ‘organize the people’, which requires a Charisma of 6 – but it has no Level requirement, so you can get it at the start of the game if your Character has a Charisma of 6. If your Character does not have a Charisma of 6, you can also put Perk Points into Charisma as you Level – you get one Perk Point every time you gain a Level – thereby slowly increasing your Charisma to 6, eventually. You can also put on Gear and Clothes that ‘accentuate your Charisma rating’ [eg. Apparel that says “CHR 1”], to get your Charisma up to 6 ‘instantly’!

    [With places like Tenpines Bluff, a Settlement you find somewhat-early on, that has barely any resources at all and barely anything to Scrap for Building Materials – the game seems to even be encouraging you to think about Supply Lines… at least, this is my interpretation..]

    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!


    Workshops will create Scrap building materials (Components) for you ‘automatically’ from any Junk Items you store in them – just ‘keep building’ and if you have the Junk that can be broken down into the Components you need, it will do it for you!



    What I mean by the above Tip is, if you put in a bunch of Forks and Knives you have found (for example), and you want to build something in your Settlement that requires Steel to build with, just go ahead and start Building – your Workshop will ‘smelt/breakdown the Junk items (in this example, the Forks and Knives) into Steel’ automatically, so you can essentially ‘use the Fork and Knife to build with’ – you do not need to “drop the items on the ground and then go into Workshop Mode and Scrap the items one by one” to get the Materials from your Junk items to Build; just select your part to Build and it will let you build it – if there is enough “components from junk parts” to do so!

    [I’m not sure if this changed from an early Patch or something, but I see a bunch of people asking in forums, even recently, if there is an easier way to get Scrap (building materials) from Junk items besides manually ‘Scrapping them one-by-one on the ground in Workshop Mode’ – there should have been a better Tutorial for this, in a way, in the game itself; but I hope this information above clears it up and helps people out]

    Remember: 
    Junk Items = Scrap Components = 
    Building Materials!


    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!
    • Repeated, Scavenging Station concept from above, as a Reminder:

      Build extra Scavenging Stations as your Settlement grows, as your Junk/Materials allow you to, so as the Settlers keep flowing in, you can assign them to the empty Stations – concentrating more on Scavenging over time will get your Settlers working and searching around, bringing you any Junk Items they find, ‘automatically’ for you!

    Scavenging Stations are assigned to Settlers, who then start wandering the Settlement randomly, picking up Scrap and Junk items they find and placing them in the Workshop over time.

     [If you have extra Food/Plants/farming and Guarding that needs to be done, Settlers seem to assign themselves to those first, if you haven’t been by to visit in a while to ‘tell people what to do’ – I have returned to Settlements to find New Immigrants that have started Farming or standing at Guard Posts on their own – but I have yet to see Settlers that Assign themselves to Scavenging Stations]

    [If you have the Automatron DLC/Expansion, you will find that robots assigned to Scavenging Stations will simply stand next to the Station with no animations occurring (sadly)]

    How To Assign Settlers To Work Stations (To Get Them To Perform Jobs In Your Settlement, Such As Running Shops/Stores Or Gathering Items For You To Use)

    Below, are the five simple steps to Assigning a Settler to any Work Station, getting them to utilize it and start contributing to the income of Supplies/Income of the Settlement. In this example, we are going to Assign a Settler to a Scavenging Station:

    1. When you first build/place a Station or Store/Shop or other useable buildings in your Settlement, it will show up as “Unassigned”, in the Workshop Mode interface. All buildings that are Assignable in a Settlement will show a ‘person icon’, in Red, to show that the building has a Requirement that needs to be fulfilled, for it to begin functioning.

    2. Find a Settler that you want to Assign to the Station. This can be a Settler that is already “Assigned” to something (so you can change their Job they are Performing in your Settlement), or a Settler who is “Unassigned” (doing nothing specific). Highlight the Settler by looking directly at them, then press the ACTION button to begin to ‘COMMAND them to do something’…

    Settlers who are Unassigned still gather Junk Items they find while walking around and put them in the Workshop Inventory for use by everyone. However, this happens slower than if they were Assigned to a Scavenging Station (which gives them ‘access to tools’). “Unassigned Settlers” contribute to ‘making people feel uneasy’ in the Settlement – which negatively affects the overall Happiness of that Settlement (resulting in lowered Production for that Settlement). Assign all Settlers to Tasks, or Relocate them to another Settlement (“Move” them), if there are no Jobs/Tasks for them to do.

    3. Go back to the Station/Shop/Building that you want to Assign the Settler to, and highlight it by looking directly at it. Then click the ACTION button to ASSIGN the Settler you just started COMMANDing, to ‘utilize this Station’ (in this example, the Scavenging Station, shown below).

    4. After clicking ASSIGN on a Station/Shop/Building, the ‘person icon’ should change from Red to Green, to show that a person is now assigned to the Station/Shop/Building (for example, the ‘Requirement for the Station to function’ is fulfilled). You should also see a message in the upper-left saying, “This resource is now assigned.” – that’s it! In this example, you have now Assigned a Settler to the Scavenging Station.

    5. If you go back to the Settler, you can check to make sure they are properly Assigned, by looking at them directly in Workshop Mode. They should now show the Task they are Assigned to (in this example, the Settler now shows a “Scavenging Station Icon” (a Buzzard, ‘the scavenger bird’)).

    Perform the above steps whenever you want to Assign a Settler to any Work Station, Guard Post, Shop or Store – the steps are the same, no matter what you need to have Assigned.

    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!

    Example of a Crafting Station, which allows you to create or modify items in the game. This is a Weapons Workbench (from Sanctuary), used to Modify found Weapons, adding higher capacity, faster firing rates, more powerful scopes, and more.
    (Click to see Full Size)


    Starting out with Weapons (Similar Concept to Armor, Below)

    In the beginning, other than the best Weapons you can save for yourself to use (or share with your Companion), SCRAP the rest for Materials…

    Don’t worry about building up a ‘Collection to Sell’ [at the start], you will run into so many enemies that you will have lots of spare Weapons to Sell for Caps later on. Scrapping for Materials not only lets you have Mats to Modify other Weapons you find and improve them as you Unlock Perks with your Points (using the Blacksmith skill) – it will also let you find other parts/materials as you ‘break down’ the Weapons you find into typical weapon-type-materials like Steel, Wood, Plastic and Screws – sadly, you cannot break down Weapons to gain the ever-important Adhesive, it seems [it is ‘already used’, I guess!].

    Example of a Crafting Station, that allows you to create or modify items in the game. This is an Armor Workbench (from Sanctuary, seen in the rain), used to Modify found Armor, adding bonuses like more defense (adding more material to armor), or putting pockets in it (to allow you carry more weight), and more.
    (Click to see Full Size)




    Starting out with Armor (Similar Concept to Weapons, Above)

    In the beginning, other than the best Armor you can save for yourself to use, (or share with your Companion), SCRAP the rest for Materials…

    Don’t worry about building up a ‘Collection to Sell’ [at the start], you will run into so many enemies that you will have lots of spare Armor to Sell for Caps later on. Scrapping for Materials not only lets you have Mats to Modify other Armor you find and improve them as you Unlock Perks with your Points (using the Armorer skill) – it will also let you find other parts/materials, as you ‘break down’ the Armor you find into typical armor-type-materials like Rubber, Cloth, Leather and Steel – sadly, you cannot break down Weapons to gain the ever-important Adhesive, it seems [it is ‘already used’, I guess!].

    Short Story/Example About Armor: Because I could Modify and Customize Raider Arm armor near the beginning, I gave up the higher-protection “DC Guard Left/Right Arm” armor pieces that I picked off of a poor dead DC Guard, [because it does not seem to Modify-able in the game and] because I ‘knew how to Modify’ the Raider Armor to be POCKETED for higher Inventory/Carry space [you need to ‘learn how’, by putting Perk Points (‘skill points earned every Level’) into Armorer, a Strength 3 skill]. I put the DC Guard Armor in a Dresser at the beginning for the time being, using the ‘Pocketed Raider Arms’ I could Modify, then – a higher Carry Weight Limit is a valuable commodity – especially at the beginning!


    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!

    Did someone say CHEATS?

    Sick of trudging around The Commonwealth like a Brahmin with two heads cut off, looking for junk to break down into materials to ‘just build’ with? Tired of picking up every piece of Junk you find, trekking in and out of town constantly and thinking “I just want to build up my base…” or “can’t there be an easy way of getting junk” or “there’s gotta be a faster way to get junk”..?


    Then wonder/wander no more – there is a way to instantly get all the materials you want!

    In Fallout 4 [and most Bethesda games], you can type the item you want and how many you want, of any item in the game, into the Command Console. However, you need to know the item’s Unique Identification Number, first (known as the “Base ID” of the item, in Bethesda games). 

    One way to find the Base ID of any item or object in Fallout 4, is to open the Console (by hitting the Tilde key, “~”, usually found next to the Number 1, in the line of numbers across the top of QWERTY keyboards), and clicking on the item or object in the game. It will then show the BaseID of the object at the top/center of the Command Console area.
    For an example; if you wanted to find out the Base ID of that Deathclaw running at you (and since we are in the ‘Cheat Section’ of this article, say… you want to kill it instantly), then you would find out the ID for it by opening the Console (“~”) and clicking once on the Deathclaw (it should be ‘frozen’ by opening the Console), which would show the BaseID of it just below, at the top of the Console area. Now, for this example of ‘killing it instantly’; you just have to type in “kill”, then a space, then type in the BaseID you see on the screen, and hit Enter. BOOM. That Deathclaw that was running at you (and you were unprepared for, full of inventory and unable to run, no doubt)? It’s dead. “First Crack At The Gear!” 

    [Note1: If you try ‘clicking on the enemy, then typing KILL, then just hitting ENTER’ right away; it may not work as desired. You may end up killing yourself… Although those steps do work, they do not seem to work 100% of the time [in my testing], therefore, the Suggestion of doing the steps from just a bit above (“clicking to get the ID, but typing in KILL and the ID number”), is recommended – to save from accidentally killing yourself and having to LOAD…]

    [Note2: The BaseID seems to change [in my testing], as in, when a Deathclaw (from our example above) ‘spawns’ (comes out of the ground), it will have one ID (and it seems to be ‘unkillable’ for a short time), and then when it starts to come at you and attack, it will change to another ID – which can then be used in the Command Console to ‘kill’ it. Also, Base Identifiers may be ‘Procedurally Generated’, which is, automatically and repeatedly created and changed, as a game goes on. Although this does not seem to happen for items like Food and Materials, it does seem to happen with Enemies and Gear (Weapons/Armor) – so be sure to take the steps above when trying to manipulate objects around you (eg. ‘kill’-ing an enemy), finding the BaseID each time, to be sure that there will not be a mistake or missed opportunity, to utilize the BaseID in the Console.]

    Want nearly-infinite food?
    Want nearly-infinite materials to build with?
    Want to ‘just build and not worry about going around collecting Junk (to build with)’? 

    Then wonder/wander no more – here is a way to instantly get all the building materials you want!


    [WARNING/Suggestion: Although getting all of the items you could ever want, whenever you want, to ‘Just Build’ – effectively turning the game into “Fallout 4: The Sims Apocalypse” where you just Build and Decorate and work on keeping your Settlers at bases Happy (not that that’s a bad thing) – it can potentially contribute to making the game ‘less exciting’, as it takes away much of the need to go anywhere or do anything (other than keep your Settlers’ Happiness maintained). This isn’t a bad thing necessarily (I have one Character I created just to play around and learn the Build Mechanics with and have fun just building and decorating..). I only mention this because I would like to Suggest to create a separate Character to do this with, or remember that when the game ‘gets kind of boring’, to create a Character where you ‘don’t cheat at all’, to create suspense/tension within the game. No matter how you prefer to play though, I hope you enjoy Fallout 4 as much as I have – and still do… Have fun!]

    I have some Batch Files for Fallout 4 below, which will allow you to ‘type in to the Console what you want’ [Materials to build with, or Food (so you won’t have to worry about Farming or feeding your Settlers)] and you will instantly have a ton of those items on your character.
    With the Items in them listed in Alphabetical Order, I have one file that is for getting Materials (Scrap/Junk to Build with), one file that is for getting Food (to Eat/Cook with) and one that is for getting huge amounts of both in one shot…

    To use these Batch Files in Fallout 4, simply download the Text file(s) and place them into the Fallout 4 game directory/folder, where the game data/files are.
    [Don’t worry, they are just Text Files, but I give directions on how to make your own further down, if you ‘don’t like to download things unknown very much’.]


    To quickly find the Fallout 4 game files location [in Steam, on PC]:

    Go to the Library section in Steam and Right-Click on the “Fallout 4” listing, choosing ‘Properties’.

    In the Properties window that comes up, click on the ‘Local Files’ tab.

    It shows you what Drive the game is on; but to quickly get to the game files themselves, click on the ‘Browse Local Files’ button, which will open a new File Explorer window (Windows).

    This location is where you want to Save the Text Files to (the ‘Batch Files for Fallout 4’), usually it will have a Path like “SteamLibrarysteamappscommonFallout 4” on whatever Drive/Partition you installed the game to.

    In that folder, Download/Save (or ‘Paste’, if you ‘Copied’ the files from another location) the .TXT files, to be able to call them up from the Command Console in-game. 

    Example of how the ‘Batch Files’ (Text Files) look, after being placed in the Fallout 4 Game Folder
    (Click to see Full Size)
    Here are the steps to use the .TXT-format ‘Batch Files’ once they are in the game directory (shown for the file for getting Food, the file for getting Building Materials, and then the file for getting Huge Amounts Of Everything To ‘Just Build’ if you want...):

    1A. To use the file that gives you 1000 of all types of Food (so you don’t have to worry about Farming or Feeding your Settlers for a long time); type in

     bat allbasefood

     in the Command Console and hit Enter. That’s it!  

    1B. You can now close the Console and you’ll find you have 1000 of every type of Food in the game, on your person.

    1C. Go to a Workshop to Store the Food there (otherwise you will be ‘overburdened’ with all of that Food in your pockets) – you will find the Food items under the AID section in your Pip-Boy, as shown below:

    2A. To use the file that gives you 1000 of all types of Materials to build with (all of the Crafting Components, so you don’t have to worry about going out and looking for and collecting Junk items to Scrap for a long time and can ‘Just Build’, if you want to play that way for a while); type in

    bat allbasematerials

     in the Command Console and hit Enter. That’s it! 

    2B. You can now close the Console and you’ll find you have 1000 of every type of Building and Crafting Material in the game, on your person.

    2C. Go to a Workshop to Store the Materials in the Workshop Inventory (otherwise you will be ‘overburdened’ with all of those Crafting Components in your pockets) – you can just hit the STORE ALL JUNK button, to do it in one step.

    For the last one, which gives 9001 of every single type of Food AND Crafting Component in the game [maybe I should have named it “IJUSTWANTTOBUILD.txt”], use the steps below:

    3A. To use the file that gives you 9001 Of All Types Of Everything To ‘Just Build’ With (all of the Crafting Components in the game, so you don’t have to worry about going out and looking for and collecting Food OR Junk items to Scrap, for a long time and can ‘Just Build’); type in

     bat allyourbase9k

    in the Command Console and hit Enter. That’s it! 

    3B. You can now close the Console and you’ll find you have 9001 of every type of Building and Crafting Material in the game, on your person.

    3C. Go to a Workshop to Store the Junk Items (Materials) and the Food (from the AID section in the Pip-Boy), in the Workshop Inventory (otherwise you will be ‘overburdened’ with all of those Every Frelling Thing In The Game For Settlement Building in your pockets).  

    Here is where to Download the Text Files to place into the Fallout 4 directory/folder (the ‘Batch Files’ to use), from the GoogleDrive for The Blog:

    allbasefood.txt file
    allbasematerials.txt file
    allyourbase9k.txt file

    If you don’t like to normally Download things ‘from unknown places/people’ [aren’t we just ‘Friends That Haven’t Met Yet, though, my dear reader?], here is what the Google Drive link looks like when you click on it:

    Still, feel free to Scan the files with your installed Anti-Virus Program(s), or online through something like Virustotal.com (this is actually a good idea to do with anything Downloaded..).

    If you you rather create your own Text Files, to place into your Fallout 4 directory/folder, to run as ‘Batch Files’, to give yourself an amount of these items, instead of fully Downloading the Text Files offered above – then here are the steps to create your own files:

    Is There A Way To Build More, Past The Limit?

    Sadly, there is a limit to how much you can Build in a Settlement – indicated by the SIZE bar in the Upper-Right corner of the screen in Workshop Mode. While this limitation is there to stop us from building so much that it makes the game go down to 1fps in that area, the SIZE limit is pretty conservative [in my opinion] and I found out that there is an easy way to ‘Build More’ – getting past that Build Size Limitation….

    When you see the message, “Nothing More Can Be Built.”, you can just press your lips together and blow, making that weird trumpet sound, after reading the steps below. No Limitations for you! Just follow these steps and you can continue to Build in that Settlement:

    (Note that this is not a Cheat, it does not affect Achievements and it is doable on Console as well as PC)

    • Get some Weapons together on your Character (specifically Guns, as this specific technique does not appear to work with Melee or Thrown in my testing). Apparel and Junk does not work for this either.
    • Bring up the Pip-Boy and Drop the Guns on the ground
    • Close the Pip-Boy and enter Workshop Mode (by Activating the Workshop Bench or holding ‘V’ (on PC) to open Workshop Mode)
    • Look down at the Guns on the ground and STORE them in the Workshop Inventory (careful not to SCRAP them, that is not what we are doing here at the moment!)
    • You should now see your SIZE bar going in reverse and it will even change from Red to Yellow to Green. BOOM. More Room To Bloom. 

    That’s it! You can now build more in that Settlement. Enjoy! If you want to retrieve your Weapons, you can just go into the Workshop Inventory (“Transfer”) and get them back – which means you can repeat these steps over and over, as needed! (Don’t forget to Share your Screenshots on Steam or elsewhere – other people want to see what you can do – and it gives them new ideas, too)

    Although it is possible to get past the Build Limit by simply dropping ‘any item’ and Scrapping it [I recently learned this on the Steam Forum for Fallout 4], this is still not what I was trying to do, with the Steps above. My intention was to STORE the Guns, so that they can still be utilized later – selling them for Bottlecaps, or ‘Breaking Them Down’ and taking their Modifications off to use on other Weapons, or just using them as Weapons in the game on the Character (or given to Settlers to help them fight off Raids/Attackers) –  that is why the Steps above utilize my method. Storing the Guns allows you to continue to use them (as opposed to Scrapping them into Components to Build/Craft with).



    [……I am going to add to this post, as I remember things that I already have forgotten and can’t seem to bring back up at the moment to throw in here; but I still hope someone finds these concepts and Tips helpful, for either starting out in the game or improving your Settlements (there are more advanced concepts to come….. Have fun with Fallout 4!]

    this would stop traffic and cause wrecks

    https://www.instagram.com/bikergeardotstore/

    And More: Deals and Sales – End Of The Month Specials (February)

    The transition from February to March this year isn’t seeing a ‘ton’ of games on special sales, but there are a few deals on almost every gaming/dealer website (some are only on for the weekend and some last until the middle of March, see each sale you are interested in for details):

    Steam, Valve’s storefront has a Spotlight Sale of Sniper Elite: Nazi Zombie Army (1 & 2), which can be purchased together in bundles or 4-Packs to play with your friends and is their Weekend Deal:

    Sniper Elite Nazi Zombie Army Sale Page
    Sniper Elite Nazi Zombie Army 2 Sale Page

    also on sale
    Trine is on sale for only One Dollar (90% off), or get Trine 1&2 for $3.74
    Warhammer 40K: Dawn of War II: Retribution is on sale for $7.59 (75% off)
    Alternativa is on sale for only $1.29 (90% off)
    The Sims 3 is on sale for $7.99 for those who haven’t played it yet (60% off)
    Kung-Fu Strike: The Warriors Rise is on sale for only $1.99 (80% off)
    Moto GP 13 is $12.00 (70% off)

    Gamefly, the storefront that you can also subscribe to (that took over Direct2Drive in 2011) has a few sales going on, one featuring all 2K Games titles at 75% off:

    (click image to see Full Size)

    also on sale
    Bioshock is $4.99 (75% off)
    Bioshock 2 is $4.99 (75% off)
    Bioshock Infinite is $9.99 (67% off)
    Borderlands, Game Of The Year Edition is $7.49 (75% off)
    Borderlands 2, Game Of The Year Edition is $19.99 (50% off)
    Duke Nukem Forever is $4.99 (75% off)
    Civilization V is $7.49 (75% off)

    GamersGate, the storefront formerly part of Sweden’s Paradox Interactive has a bunch of sales going on as well:

    (click image to see Full Size)

    also on sale
    Call of Juarez: Gunslinger is $9.72 (46% off)
    with Battlefield 4 is out, Battlefield 3 is on sale for $4.99
    Sniper Elite V2 is on sale for $7.50 (75% off) or get the
    Sniper Elite V2 Collection (which includes: Sniper Elite V2, the Sniper Elite V2 Kill Hitler Pack, the Sniper Elite V2 The Neudorf Outpost Pack, the Sniper Elite V2 Original Game Soundtrack, and the Sniper Elite V2 The Landwehr Canal Pack DLC) all for $13.75 (75% off)
    The Tropico Trilogy Bundle (which includes: Tropico, Tropico Paradise Island, Tropico 2 Pirate Cove, Tropico 3, Tropico 3 Absolute Power) all for just $4.99 (75% off)
    and last but certainly not least
    The Total War Master Collection bundle (which includes: Empire: Total War, The Medieval 2 Total War Collection (M2TW and the M2TW Kingdoms Expansion Pack), Napoleon: Total War™ Imperial Edition
    Rome: Total War Gold Edition, Total War Battles: Shogun, Total War SHOGUN 2, the Total War Shogun 2 E-Guide, Total War Shogun 2 Fall of the Samurai, and Viking: Battle for Asgard) all for $25.00 (80% off, regular price $124.99!)

    Once again, some of these are only on for the Weekend and some last until the middle of March, so check out the sale you are interested in for details. I hope you catch something you want – and See You In The Games!

    Deals And Sales – ‘Things Goin’ On This Weekend’ (Weekend of August 11th, 2017) [Notification]

    Just a quick Notification of some things going on… Once in a while, I try to post about Sales going on somewhere – especially the ‘big’ ones, like Summer’s End or Christmas Sales. This weekend, there are a few ‘Free Weekends’ and Sales going on (that I saw so far) and thought I wanted to share them, just in case there were others interested in these games, heh. Here’s what I saw is Goin’ On This Weekend:


    Guild Wars 2 Expansion (Path Of Fire) is Free To Try all weekend:

    https://www.guildwars2.com/en/news/get-ready-for-the-guild-wars-2-path-of-fire-preview-weekend/

    GOG.com (formerly Good Old Games) is having a couple of Sales on games which include series like Master Of Orion, Warhammer 40K, Painkiller, Delta Force, Red Faction and at the same time having a sale on Strategy Games like Codename Panzers, Men of War, Hybrid Wars, Total Annihilation, Empire Earth, and more:

    https://www.gog.com/promo/20170807_weekly_sale
    and
    https://www.gog.com/promo/20170811_special_promo_strategy_sale

    Some other games, which are Free To Try all weekend via Steam, are:

    For Honor, the medieval swordplay/battle game is Free To Try all weekend and selling for half-price
    (for those that remember Die By The Sword, it looks like it may be similar to that, but in an ‘arena’ setting [sorry, but I haven’t been able to try it yet]):

    http://store.steampowered.com/app/304390/FOR_HONOR/

    Saints Row IV, from the crazy “each game is increasingly like GTA-on-drugs” open-world/action
    series, is Free To Try all weekend and selling at a reduced price
    [I haven’t tried it yet, but I am still playing the wacky Saints Row III once in a while and still getting a kick out of it]:

    http://store.steampowered.com/app/206420/Saints_Row_IV/

    Sorry I didn’t get to finishing this sooner, but the weekend isn’t over yet! Get out there and try these games out or grab something you want on sale – and maybe See You In The Game!

    Edit:

    I completely forgot one more I was going to post in here! 

    GamersGate also has some games on Sale right now, including Borderlands (for five bucks!), the Mafia series, Bioshock series, Xcom series, and more:

    https://www.gamersgate.com/offers

    [Note: I am not affiliated with these game sites, nor do I receive any compensation for mentioning them here (the Links do not have any ‘affiliate tags’ or similar additions to them) – I am merely an enthusiastic gamer and like to share deals and other goings-on with other gamers like me. Enjoy!]

    Finding your Purpose for Fitness!

    Most people starting a fitness program seek to find motivation externally through a program, device, coach or trainer.    Unfortunately this never works!    Motivation to get through the hard work necessary to change your lifestyle so that you can achieve and maintain higher levels of fitness and health has to come from within you!
    No coach or trainer can motivate – they can only help you find your motivation or purpose.      If you talk to 100 different people starting a fitness program and ask them what their goals are you will hear some very consistent responses such as “lose weight and tone up”, “get ripped”, sleep better, have more energy, etc.    At the end of the day goals are important but being crystal clear on why they are important to you personally is what is going to keep you on track to actually achieve those goals.
    The science of human motivation can be summed up in one simple acronym:    A. M. P. which stands for:
    Autonomy – “The quality of being self-governed.”    Or put another way people want to be in control of their lives and make their own decisions about what they do!   Anyone who has spent a fair amount of time with a two year old has heard them scream “I do it MYSELF!”     As funny as that sounds to an adult trying to help a two year old put on their shoes or do something else it is really just an honest expression of the drive to have autonomy.     It is not just two year olds who feel that way!
    Mastery – is an extension of the desire for autonomy because to master something is the ultimate expression of autonomy and being in control of one’s life!     This is one of the reasons that fitness can be such a powerful catalyst for overall lifestyle changes.    Learning how to master a movement or activity is the epitome of mastering a key aspect of our lives!
    Purpose – as powerful as the drive for Autonomy and Mastery is Purpose or Meaning is even more powerful.       The definitive work on this subject is probably “Man’s Search for Meaning” by Victor Frankl.    This author suffered through the concentration camps with all their horrors including the deaths of his entire family.     He survived because he became focused on the need to survive to tell the story to the world and this gave him purpose to withstand this incredibly challenging experience where thousands of others simply gave up and died.   Without finding this purpose he never would have lived!   He went on to create a specific type of therapy he called “Logotherapy” or meaning therapy where the focus is helping people find their source of meaning or purpose.
    One of the universal truths about human beings is that finding a clear purpose is the key to success in reaching any goal.   You must be clear on why it is important to you or you will quit!       Your purpose or meaning is personal to you.    For one person their purpose may be that they want to get fit because they just went through a divorce and lack confidence in their appearance while for another they want to get fit to be a role model for their children so their children can grow up healthy and happy unlike they did themselves.

    Curing the carb on a vegetarian diet

    Adapting the Fast Track, No Backtracking and Keep on Tracking plans for vegetarians raises all sorts of issues. It certainly isn’t impossible, but your level of choice will be somewhat restricted in the initial phases of the plan — especially if you are a bona fide vegetarian who doesn’t eat fish or eggs, as well as meat. A balanced healthy diet is the ultimate aim of these plans.

    Many people adopt a vegetarian diet for reasons of health rather than ethics, but unless you are careful about menu-planning, the average vegetarian diet isn’t necessarily any healthier or less fattening than that of a non- vegetarian. There is often a tendency to combine too many complex carbohydrates with high levels of saturated fats — think pizza, jacket potato and cheese, fries with manufactured mayonnaise or sugar—ridden ketchup. In fact the chances are your diet could be less healthy. This is because vegetarians need to eat a variety of plant-based foods to provide all the essential amino acids that are readily available in animal protein. If just one of the essential amino acids is low or missing then protein synthesis will fall to a very low level or stop altogether.

    Diet Start

    Complimentary proteins

    The key to ensuring that you recive the full compliment of essential amino acids on a vegetarian diet is to combine beans and grains. If you always choose a protein and a grain from the two lists below then your protein intake should be balanced.

    The risks of a diet too low in protein

    If you arenot careful then you may not have enough protein in your diet. Protein deficiencies in adults may result in lack of vigour and stamina, mental depression, weakness and poor resistance to infection. Antibodies will not function as well as they could — a condition that impairs the healing of wounds and recovery from disease. If you have been through a period of ill health then a higher intake of protein is vital in order to rebuild or replace tissues that are no longer functioning properly.

    Good nutrition

    In addition to making sure that you eat enough protein, a vegetarian diet may also be lacking in iron, zinc, calcium and vitamin B12 and D — all of which are normally found in animal products. However, these vitamins and minerals can all be found in alternative animal-free sources, and these foods should be staple foods on a vegetarian diet.

    Low-carb plans for vegetarians

    You may think that it is impossible to follow the Fast Track, No Backtracking and Keep on Tracking plans if you are vegetarian, but you would be wrong. If you want to create vegetarian versions of these plans then there are a number of simple rules that you will find it helpful to follow:

    • Eradicate all processed and refined carbohydrates from your diet.
    • Follow all the general guidelines for the individual diet plans, such as drinking lots of water and eating the bulk of your fruits and vegetables raw.
    • Use the individual plans as a starting point and adapt the recipes to suit your diet.
    • Use tofu, whey protein drinks, certain cheeses, eggs and nuts to provide adequate levels of protein and help you to balance your blood sugar levels.
    • Always carry snacks such as nuts, protein drinks or hard-boiled eggs with you as it may sometimes be difficult to stick to your diet when you are eating out.
    • Try to avoid situations where it would be very easy to break your resolve, such as when you are hungry and the only lunch option available is a sandwich.
    • If a book exists called A million and one things to do with tofu — buy it.
    • Make food as interesting as possible by experimenting with fresh herbs, spices and oils rich in omega-3 fatty acids such as flaxseed oil.
    • Boost the nutritional value of your food by adding fresh sprouts, such as alfalfa, to your salads, soups and smoothies.
    • If you start to feel tired and lacking in energy, add small amounts of brown rice or other wholegrains to your meals.

    Currently June (?!)

    Oh, how I love to start the month with Farley’s Currently over at Oh’ Boy Fourth Gradeespecially when I actually remember that it’s the start of the month and don’t have that revelation about a week in. 🙂

    Here we go…

    Listening:  I got to see Sara Bareilles perform at a small Atlanta venue on my birthday a couple of weeks ago, and wow – can she ever sing! She’s been in heavy rotation on my playlist ever since.

    Loving: The first couple of weeks of summer vacation are always the best because it feels like there’s so much free time ahead. A quick glance at my calendar would remind me that this summer is going to fly by very quickly, but for now, I’m thrilled to have a little breathing room before the hustle and bustle of another school year kicks in.

    Thinking: Math is on my mind a lot right now. I’m finishing up my final project for my math endorsement (an algebra unit), and I’m joining multiple book studies about math-related books this summer. My students did very well overall on the year-end standardized tests, but I feel like I’m still scrambling to make sense of the best way to teach the Common Core. I need to figure out something that will allow me to differentiate more without creating oodles of additional work on my end. If anyone has the magic solution, please let me know.

    Wanting: We bought a new desktop computer last year, and it was intended to be mostly for my school/blogging/TpT use. That worked for a little while, but my husband has slowly taken it over and claimed it as his. He’s been working crazy hours (he’s an attorney), and his work is often more deadline-oriented than mine, so I’ve given in. But now that I’m getting ready to start my doctorate, it might be time for us to give up on the idea of sharing a computer. I have a work laptop that I use sometimes, but it’s got some crazy restrictions/configurations that limit the programs I can install, etc. For most people, it’s not a big deal, but when you’re a tech-geek like me, it’s frustrating. So last week, I made a big pitch for me to get a new iMac desktop, and he agreed! There were some intense negotiations that went into the process, but in the end, we made a deal that we can both live with. I’m going to be responsible for generating the extra income to make the payments on it (we got it financed over 18 months), but between some tutoring jobs I’m taking and TeachersPayTeachers, I think I’ll be able to swing it.

    Now I just need to hold on for Monday when my precious new toy will arrive!

    Needing: I need to get organized and prioritize what I need to accomplish this summer because there’s no world in which I’ll have time to tackle my ever-growing to-do list. I need to create some realistic goals with deadlines to keep myself reasonably on-task. I also need to cut out distractions like randomly checking Facebook or email or Twitter every 10 minutes.

    3 Vacay Essentials – 1) Shade – I have the misfortune of being allergic to almost every type of sunscreen that exists — including the ones that say they’re hypoallergenic and made for sensitive skin. Put some of that sauce on me and stick me in the sun, and my body breaks out in a terrible, lobster-like swollen rash that is WAY worse than any sunburn I’ve ever had. So I stick to the shade as much as I can, and I visit my dermatologist every year to make sure that I’m not getting skin cancer. Not fun, I tell you.

    2) Books – This used to be a huge ordeal before the advent of the Kindle. I like having lots of summer reading options, ya know?

    3) Beverages – Hydration is important! And there’s a whole slew of summer drinks that I could put on the list… But seriously, I’ve been drinking at least 64 oz of water each day of this vacation before I even touch anything else, so I think I’m doing well.

    Big thanks to Farley for continuing to host this linky. Every month I find so many amazing blogs and learn lots about my fellow bloggers. If you aren’t participating already, you should definitely link up!

    ,
    Have a great June, everyone!

    Health Benefits of Red Pomegranate

    HEALTH BENEFITS OF RED POMEGRANATE

    Health Benefits of Red PomegranatePomegranate or pomegranate is a fruit with a red color that turns out to have a lot of nutrient content. Nutrients contained in the fruit is so much especially nutrition for protection of the skin. Some nutritionally beneficial is an antioxidant, anti-inflammatory, and anti-aging.
    Health Benefits of Red Pomegranate - 1
    Pomegranate Benefits for Beauty
    In this modern era, the pomegranate has been processed into a variety of products, both health and beauty. So what are the benefits of the pomegranate to the beauty of your skin? Consider the following tips:

    • Caring for the Skin
    Pomegranate turned out very rich in collagen. Collagen is the basic component of the skin that keep skin smooth and soft. Not only rich in collagen, the compounds in pomegranate also helps fibroplats cell growth. Fibroplats are cells that have the task to produce elastin and fibers that are useful to keep the skin to remain smooth and taut. Pomegranates can also stimulate the proliferation of keratinocytes. This process is a process of forming the outermost cells of the skin.

    • Helps Cell Regeneration
    If you have freckles or skin rash on the face, it could be signs if your skin starts to break down. If your skin is already starting to show signs of such, better immediately consumes pomegranate. This is because the pomegranate can provide benefits to protect your skin layer and help regenerate the skin in the inner layers of your skin. The content of antioxidants in pomegranates can also help your skin ward off free radicals caused by pollution.

    • Prevent Premature Aging
    You want to look to look like a young impressed? It helps you consume pomegranates. This fruit turned out to contain a compound that works to prevent premature aging. You can consume it in juice form or in the form of oil. But you are advised to use oil only because it proved more effective. You can apply pomegranate oil to your entire body after bathing. By applying it regularly, your skin will become firmer and younger looking.

    • Treating Acne
    Pomegranates are rich in vitamin C. Vitamin is that it has a function to regulate oil production in the face. To treat acne using pomegranate quite easy. The first pomegranate puree until smooth. Then apply on face masks to be like. Let it dry and then rinse with cold water. By applying to your face with acne, this pomegranate will shrink acne once existing acne scars on your skin. So, want to be free of acne? Use this pomegranate fruit mask on a regular basis.
    Health Benefits of Red Pomegranate - 2
    • Moisturize The Skin
    Do you have dry skin? If so, you can use pomegranate to moisturize. Pomegranates have very little meat structure. Size is what can cause pomegranate can go into the deepest part of your skin. By logging into your skin, pomegranate will work to moisturize your skin. Not only moisturize the skin only, pomegranate is also able to cope with the irritation of the skin. This is because the pomegranate contains omega 5, which serves to keep your skin moist.

    • Treating Skin Irritation And Skin Burns
    Pomegranate it also can be used as an ointment to treat your skin is injured. This is because the pomegranate contains compounds called polyphenols. Besides polyphenols, pomegranates also contain another substance called anti-inflammatory substances. Both of these substances which can be used to treat your skin is exposed to irritation or burns.
    How to make it too easy, you can refine pomegranate and afterwards paste it on your skin is injured. Let dry and rinse with cold water slowly so as not to cause pain. Do this treatment until your wounds heal properly. In order to maximize results, you are also advised to drink fruit juice to the wound on your skin really recovered.
    Pomegranates for Health Benefits
    The benefits of pomegranates not only for beauty, but also for health. Pomegranate is commonly used to treat deficient blood aka anemia. In addition, the fruit is also very well taken by pregnant women.

    • Addressing and Preventing Cancer
    Within this pomegranate fruit contains a substance called flavenoids. Flavenoids substance is a kind of high antioxidant substances that are useful to prevent cancer in your body. If someone contracting cancer, it is better to consume the fruit of this one because the fruit is proven to be able to fight cancer cells growing. Some types of cancer that can be treated with pomegranate juice, among others, breast cancer and prostate cancer.

    • Overcoming Anemia
    Not only vitamin that is useful to you only beautify. Pomegranate also contains iron. Iron content in pomegranates fact can treat you who have anemia. For those who have anemia, you can create and drank pomegranate juice regularly. Not only serves to treat your anemia alone. Pomegranate was also able to prevent anemia early.

    • Other Benefits of Pomegranate
    In addition to the above benefits, there are other benefits of pomegranate, especially for women who are pregnant. If you are pregnant, it is good to consume pomegranate. Facts indicate if the pomegranate can reduce the chances of having a baby born prematurely. In addition to consuming pomegranate baby weight will make you become more standardized. For those of you who are old, pomegranate also has properties that are very good if you consume regularly. This is due to the arrival of pomegranate can prevent Alzheimer’s disease.
    There are so many benefits of pomegranate is right, Ranging from health to beauty problems can be overcome with pomegranates. Hopefully Articles Health Benefits of Red Pomegranate that we share today can be beneficial for you. Thank You.

    And More: Share and Tell – Imitating The GTAV Title Logo Style [Commentary]

    I recently created a logo for The Blog, done in the style of the GTAV game logo (Grand Theft Auto Five Title Logo, seen Left). I had a lot of fun figuring out how to imitate the look of it and wanted to share a bit of how I did it, in case others want to give it a try too, or just to enjoy the ‘Behind The Scenes’ story of things… Originally I was creating this to be used on Headers for posts here at The Blog (since I was playing GTAV lately), but I also put it on a Wallpaper posted at The Blog’s Flickr page – but then decided that from now on, I will not put ‘my logo’ on Wallpapers that I want to share with everyone, I will just use whatever game logo the game is at the time, reserving ‘my logos’ mainly for use here [I was feeling bad for ‘forcing them onto others’ if I were to put them on Wallpaper for sharing with everyone…]

    Just below this paragraph then, is The Blog logo, re-done in the style of the game logo from the game GTAV (Grand Theft Auto Five)… Created entirely in Corel’s Paint Shop Pro, I first had to find a font for the lettering. I found a few of them (Pricedown is one, GTArussian is another, the name of the last one escapes me at the moment). I typed out each word separately, so that I could place them really close together (like the GTAV logo has for its’ words), overlapping some of the ‘tails’ of the text (which was fine, for me). The “B” behind the ribbon was something else… Baskerville, that’s it.

    My version of The Blog logo, done in the style of the GTAV game title logo
    (Click to see Full Size)

    The ribbon was its’ own element, blanked out (white with no text), placed on top of the “B”, which itself was made in layers of outlines and a Gradient, using the original game title logo (“GTAV”) as the source for the green shades (clicking with ‘the dropper’ on the far sides of the green area in the “V” in the GTAV logo). The spiral design was found online by an anonymous maker [let me know if it is you, I’ll give you Credit!], which I had to colourize and then placed in a way that was similar to the GTAV logo, on a layer below the text “B” vectors, so that it ‘shows through’ within the “B” area.

    The text on the ribbon was made with a font that escapes me at the moment, but the colouring for it was hard to figure out, as it looks like it is directional (as though a light were casting highlights from one direction). I figured out to use the Bevel effect in the Layer Styles of Paint Shop Pro, to emulate a light source coming from the bottom-left, for the text ‘The Blog’. It turned out great for imitating the lighting on the text ‘Five’ in the GTAV game title logo ribbon! The hardest part was getting it to ‘curve’. I don’t know how to create a line and make the Text follow the line yet, so I simply used the Mesh Warp function, to ‘move it around’ manually and get it to seem at least a bit like it is curved.

    A few layers of black and grey for ‘outlining’ the text and entire composition (made by ‘expanding’ the selected text and then Filling with Black or Grey, moving the white text in front of it each time) and it was complete…

    I’ll mainly be using it in Headers and Screenshots in posts almost exclusively here, at The Blog. I just thought that some might like to hear a bit of ‘Behind The Scenes’ or ‘Commentary’ about it – hey, there are a lot of people that (like me) watch Commentaries! Haha

    I hope you enjoyed my little Share and Tell – and if you play GTA Online – See You In The Game!

    Original GTAV game logo design by Rockstar, Take-Two Interactive

    [Personal Note/Declaration: I am not associated with, nor do I receive anything in any manner or form, for mentioning Corel or Paint Shop Pro. I am merely an enthusiastic user of the program (I have played with it off and on since it was owned by JASC). For fairness and completivity, I shall mention another great graphic editing program, The Gimp (now just called GIMP?) – which is Open Source and entirely Free – all of the steps above can also be performed with this free program]

    5 Benefits Of Garlic For Health And Beauty

    5 BENEFITS OF GARLIC FOR HEALTH AND BEAUTY

    5 Benefits Of Garlic For Health And BeautyThe benefits of garlic. Do you not like the smell of garlic? Although garlic has an unpleasant smell, but garlic has various health benefits. Garlic including spices are widely used by the people of Indonesia, India, and other countries. Food is considered incomplete if it is not written with garlic in it. Garlic gives a different flavor to the food. Besides being used as a cooking ingredient, garlic has many other benefits.
    Garlic is rich in compounds such as allicin, sulfur, zinc, and calcium have a variety of health benefits, beauty as well as antibiotic and antifungal properties. Garlic is also a rich source of minerals known as selenium. Selenium is known to fight cancer and works with vitamin E in the body to increase antioxidant power. Garlic also acts as a blood thinner because of its salicylate content. This can increase blood flow and improve circulatory health. Here are the benefits of garlic.
    5 Benefits Of Garlic For Health And Beauty - 1
    1. Treating Asthma
    Garlic can be helpful for treating asthma. The trick to mix 10 drops of garlic juice with 2 tablespoons of honey in a glass of water. Drink every day to control asthma attacks.
    2. Treat Sore Throat
    You do this by mixing the garlic juice with hot water and gargle for treating sore throat.
    3. Treating Cough
    Add 20 drops of garlic juice to a glass of pomegranate juice. This can help to cure all types of cough.
    4. Overcoming Acne
    Garlic juice can be used to cure acne. Dab garlic juice to the acne on face for 5 minutes. Do not apply garlic juice to the acne in the long term as applied at bedtime and allowed to wake up, 5 minutes is enough.
    5. Treat Baldness
    Garlic can be used as a natural remedy to treat baldness. Dab garlic juice to the points of the hair. Do it twice a day and do not get exposed to the eye.

    5 Benefits Of Garlic For Health And Beauty - 2

    That 5 benefits of garlic for health and beauty. It would be nice, to know in advance if you have a skin that is how. If you have sensitive skin, it is not recommended to use garlic as a base for skin and hair mask. Hopefully article 5 Benefits Of Garlic For Health And Beauty we share today can be beneficial for you. Thank You.

    Globesity continue…

    WHY WERE PALAEOLITHIC PEOPLE SO HEALTHY?

    • They had an active lifestyle
    • Their protein intake was far higher in polyunsaturated fats, because their animals were smaller and wild
    • Their consumption of fibre was far higher than ours, at around 100g (31/2oz) per day
    • The plants and berries they were eating were providing them with around 300 times more immune- boosting and antioxidant phytonutrients (plant nutrients) and vitamin C than the average diet offers today.

    Warning signs from the present day

    Diet Start

    • 300,000 American deaths per year are due to obesity-related non- communicable diseases. This accounts for 12 per cent of the entire US healthcare expenditure, costing the country $100 billion (270 billion) per year. The cost of a cheeseburger may be coming down, but its cost to the nation’s health most certainly is not.

    In 2002 the Centre for Disease Control and Prevention (CDC) in Atlanta estimated that 17 million Americans, including 151,000 under the age of 20, now have diabetes. Type 2 (or adult-onset) diabetes is a disorder resulting from the body’s inability to make enough insulin (a hormone that regulates glucose metabolism in the body) – and it can be life-threatening. The risks of heart disease and stroke increase two- to fourfold and the death rate doubles in diabetics. The disease is also the leading cause of blindness, kidney failure and amputations.

    • In 2002 the National Audit Office in the UK revealed the following facts:

    58 per cent of adults in the UK are technically overweight, and 20 per cent are clinically obese.

    In 1998 around 30,000 people in England alone died prematurely as a direct consequence of being overweight.

    In the same year obesity was responsible for 1.8 million lost working days, costing the National Health Service and the economy of the country an estimated 22.5 billion ($3.6 billion).

    The number of people who are obese in England has tripled over the last 20 years, and if this trend continues, one in four people will be obese by the year 2010.

    • North American Inuits, whose native diet traditionally consists of whale meat, berries and moss, had no history of heart disease, diabetes or dental decay – until they introduced white flour and sugar into their diets.

    The carbohydrate jewels

    By upping your intake of low GI fruit and vegetables, you will not only be on your way to becoming leaner, but you will have a profound effect on your health. The amazing phytonutrients (plant nutrients) that you find in brightly coloured raw organic fruit and vegetables are clever little substances that can protect you from ill health in various ways, although many people’s diets are sadly lacking in them.

    Phytonutrients can help regulate the immune system, stabilize vitamins in body tissues and protect from serious illnesses, such as such as cancer. They do this by working as antioxidants alongside vitamins A, C, E and D, and the minerals, selenium and zinc. As a team, these powerful compounds have the ability to slow down the damaging oxidative process caused by those ‘enemies of a healthy state’, the free radicals. Antioxidants can also rid the body of these free radicals, which are the natural waste products of metabolism, which, if left unchecked, can lead to degenerative disease, by causing imbalances on a cellular level.

    Diet Start

    Take note that these free radicals are also found in overheated oils and fried foods, another good reason to kiss junk food good bye.

    They aren’t classed as essential nutrients, but without phytonutrients your sense of wellness would be severely compromised.

    They work in the body at deep physiological and biochemical levels, and luckily enough are to be found in low-density/low GI fruit and vegetables. Eating these raw wherever possible is the key to maximizing their life- enhancing qualities. Cooking destroys many of the benefits that you will reap if you include a colourful array of energy-boosting raw fruit and vegetables in your daily diet.

    Life is a balancing act

    So now you have a better understanding of the impact that the wrong carbohydrates can have on your body, and have established that you need to incorporate more of the colourful and low GI fibrous fruit and vegetables in your diet. But man cannot live by carbohydrates alone. You will have to take a close look at the two other macronutrients that work hand-in-hand with carbohydrates to provide energy and nourish the body: protein and fats.

    The key to balancing blood-sugar levels, banishing insulin resistance and losing excess weight lies in successfully balancing these three macronutrients.

    Bay Leaf Benefits For Health

    BAY LEAF BENEFITS FOR HEALTH

    Bay Leaf Benefits For Health – Benefits of Bay Leaf Very Friendly For Healthy, bay leaves often used for cooking that delicious eaten food so much. Apparently, behind it, there are benefits that are friendly to our health. Various benefits are unfortunately often overlooked by most people. In fact, with these benefits can be an intermediary for the healing of disease we are suffering.
    Usefulness bay leaves can help cure some diseases below. Of course this is good news especially for the anti with too many chemical drugs. But of course not all diseases can be eradicated with bay leaves. Therefore, we need to watch and observe what any kind of disease that could use the leaves as a healing medium. Here below are some diseases that can benefit the bay leaves and keeping aids healing of this disease:
    Bay Leaf Benefits For Health - 1
    Efficacy And Benefit Bay Leaf
    1) Lowering cholesterol and cure
    Who is not afraid of the cholesterol that is guaranteed to make a variety of diseases aftershocks dating and undermine our health? Bay leaf turns effective to help lower cholesterol, you know. Bay leaves can be used by boiling. Water boiled using 3 cups of boiled water up to 1 cup water alone. The number of leaves that are used between 10 to 15 sheets. Drink decoction of leaves is 2 times a day. Undoubtedly cholesterol disease would run out of our lives.
    2) Benefits leaves for Preventing diabetes
    Diabetes is a disease of the opening of diabetes. Or it could be a new diabete. Diseases due to sugar intake could have turned out to be muted with bay leaves. The trick is to drink a decoction of bay leaves regularly.
    3) Treat sore eyes
    The eye is the lamp of life. Many people are very careful with the subject’s eyes. Various diseases of the eye can be very disturbing to us. One of them is an eye sore. For those of us who already diseased eye pain, could try to cure him by way of greeting leaf decoction rubbed into our eyes. Continue to do this until the eye back to normal alias recovered.
    4) Lowering of uric acid
    Gout is a disease which is so painful. In addition to taste the pain, the disease can also disrupt our daily work because of the pain. How to reduce it is to lower uric acid levels in our bodies. It can be easily turned out with bay leaves. Dried bay leaves quite a number of 10 pieces boiled with 10 cups of water. Boil some water until reduced to seven glasses and drank regularly only 2 times a day.
    Bay Leaf Benefits For Health - 2
    5) Relieves acute ulcer
    Bags of rice alias ulcer disease can be very tolerable nuisance. Acute gastritis can disrupt daily activities and even hospitalization can wait us! How powerful enough to ease it is to boil 15-20 bay leaves to 1/2 liter of water. Wait until the water is reduced, then add the palm sugar. The addition of palm sugar does not reduce the efficacy of bay leaves. So, fortunately there is sweetness in the stew is made. Then, decoction of leaves ready to be drunk. Potation regularly. Gradually, acute ulcer will subside.
    6) Cure indigestion
    Digestion is very important to the process of obtaining energy in our daily life. Indigestion mean disruption of cider absorption of nutrients. It could be that the error comes from the food itself. Indigestion include: constipation and diarrhea. Both are very excruciating. But not when drinking the decoction of leaves. Decoction of leaves that have been given a bit of salt shrinkage. Afterwards, drink during diarrhea or constipation attacking our digestion. Undoubtedly digestion will be better and the disease gradually disappear as well.
    7) Benefits of bay leaf for Lowering high blood pressure (hypertension)
    High blood pressure (hypertension) is a dangerous disease because of diet, activity, and also the emotions must be strictly maintained.
    Unfortunately, all that just care for daily life alone, but nothing could be significant. As a result, many people turn to drinking diverse chemical concoctions that are not necessarily good for health in the long term. The use of bay leaves can be applied. The trick is to drink a decoction of bay leaves. Bay leaf decoction is used by mixing 7 to 10 bay leaves with 3 cups of water. Shrink water to 1 cup only. Then, drink 1/2 cup at a time. Perform 2 times daily routines in this drinking boiled leaves.
    Use of leaves above average by boiling and drinking boiled water after the cooking water is quite cold. Another way is by rubbing the cooking water. How this way is very natural and easy to apply. How? Many are also the benefits of bay leaves for our health. It’s all unfortunately many do not know and ignore it.
    Most people only focus using the benefits of bay leaves for cooking only. This is certainly not wrong. But if with a little knowledge and understanding, bay leaves can be effectively replaces the traditional medicine against drug dependence
    chemical. Can also be used as a kind of combo to crush all, some, or one out of seven of the above diseases. Bay leaf prices are also relatively very cheap. Detailed seasoning in the market was ready to give some bay leaves.
    Thus articles about Bay Leaf Benefits For Health. Hopefully this article about Bay Leaf Benefits For Health that we share today can be beneficial for you. Thank You.

    Franchisee Profile: Bill and Bob Aicklen

    Franchisee Profile: Bill and Bob Aicklen

    Bill Aicklen and his brother Bob, who is currently based in Texas, will be opening their fifth Workout Anytime gym in May. The brothers opened their first gym in Decatur in November 2009; bought the company’s flagship store in Dunwoody in 2012; purchased the brand’s first franchise location in Douglasville in 2013, and built their fourth store in Rome in June 2013. 

    Bill, 63, received a Bachelor of Arts in philosophy from Old Dominion University in Virginia, and landed his first job in the banking industry working in the operations and financial systems department. From there, Bill moved on to spend the next 30 years of his career in the computer software business, performing various roles including post-sales, training and support. 

    In 2006, Bill decided that he wanted to get out of corporate America and Bob, who was interested in investing in businesses, invited Bill to manage the operations. 

    The first business that the brothers partnered in was an express oil change franchise. They built and operated two stores in Woodstock before selling in 2012 to focus their time and effort on Workout Anytime. 
    How did you learn about Workout Anytime? 
    We were looking for other business opportunities, and Bob came across Workout Anytime on the Internet. A business broker also presented the concept to us. 
    Why did you choose an opportunity with Workout Anytime? 
    From a franchise standpoint, it’s an easy business to get into; it’s simple. There’s not a lot of moving parts and you can staff the gym with just one or two people. Also, we both have strong customer service backgrounds and understand the importance of hiring the right people and providing excellent service. 
    How has business been since joining the brand? 
    We have between 1000-1700 active members at each location. Since we took over the Douglasville store and invested money into upgrading the equipment, we have turned it around. Our club in Rome is based in a small city with very little competition in terms of big name brands, and we have been very successful there. I expect Suwannee to also do well because it’s in a highly concentrated residential area. 
    Are you involved in any charities or community outreach?
    We localize our charity work depending on the club, and we usually donate free memberships for silent 
    auctions. We also partner with Red Cross by allowing them to park their blood drive buses in our parking lots every quarter – the next drive will be in Douglasville at 3pm on May 12. We have also previously put buckets in our gyms for people to donate pet supplies for the Humane Society.

    Efficacy And Red Andong Plant Benefits For Health

    EFFICACY AND RED ANDONG PLANT BENEFITS FOR HEALTH

    Efficacy And Red Andong Plant Benefits For Health – red Andong has a scientific name Cordyline fruticosa. It seems that the classification of the plant is quite complicated so that he has so many other scientific names. Synonyms scientific name is Convallaria fruticosa, Asparagus terminal, Aletris chinensis, Dracaena Ferrea, Cordyline terminalis, Dracaena terminal, and the terminal fructicosa. This plant could be considered as members of Liliaceae (type of lily), previously entered into the group of Dracaena, or Laxmanniaceae, or Agaveceae, but now he has put into groups asparagaceae. Genus Cordyline itself consists of at least 15 species, with quite varied forms.
    Efficacy And Red Andong Plant Benefits For Health
    Because this plant is widespread begin Southeast Asia, Melanesia, Australia, the islands in the Indian Ocean, to Polynesia, then he has a lot of names or sebuatan. Another name cabbage palm, good luck plant, ti plant, Sabang, jijuang, mak pu mak mia, dracena, bloddracena, hanjuang, leaf tie, wood urip, handwang, endong, linjuwang, bakjuang, renjuang, Laklak, Sawang, anjiluwang, anderuwang , lytic, idahan, Ti Kouka, ai hurry, and cana la india.
    Plant crops buggy is a drug that is often used as a barrier land, fields or gardens, ornamental plants, plants for graves. But it turns out, did you know that the benefits of the plant as a cure various diseases carriage turned out very much.
    Feature Feature Efficacious Medicinal Plants: Red Andong (Cordyline fruticosa)
    Plant red carriage (Cordyline fruticosa) is easy to maintain because it is very resistant to drought, life began plains to an altitude of 1900 meters above sea level. Including monocot plants. Given the potential benefits of carriage as a medicinal plant that is quite diverse, it does not hurt to plant crops this gorgeous around your home. Andong leaf properties for health had been known by a variety of tribes long ago. Therefore, the plant is deliberately cultivated in many places. If you are interested, plant propagation buggy is very easy. Propagation can be done by stem cuttings, or can be by separating the shoots that grow at the base of the stem of the plant underground.
    Single leaf sized with a pointed end, can be used as wrapping food (some sources say could make food last longer because of its nature as an antibacterial). Red leaf color purple or pink, so it appears the contrast between other plants. Size lancet-shaped leaves that can reach 20 to 60 cm in length with a width of 10 to 15 cm. The leaves on the stems have looked composed piled high to form a rosette tip of the stem, leaves an arrangement is spiral (rotating). In some places, young leaves and green vegetables to serve with cooked rice. The flowers come out as stem length of about 30 cm from the armpit leaves when the plant is quite old. The color is yellowish or greenish white, or can be white and purple.
    Efficacy And Red Andong Plant Benefits For Health
    Efficacy and Benefits of Andong Plant (Cordyline fruticosa) for Health
    Various diseases and health problems such as tuberculosis (TB) and coughing up blood, dysentery, stomach pain, diarrhea, heartburn, urinary bleeding, wound for venomous animal bites, open wounds, menstrual too much, fever, hemorrhoids, inflammation of the gums, bruising , asthma, cancer and tumors as well as relaxes muscles and nerves can be treated with this herb. Parts of plants to be used as leaves, flowers, roots, fresh or dried.
    In Hawaii, the natives, leaf carriage believed to repel evil creatures delicate nature of the house. In Polynesia, which has old roots, such as forming rhizomes and starch, commonly used as a food ingredient or ingredients medicines. In Papua New Guinea, carriage harnessed its roots by boiling, then drink boiled water so that breastfeeding mothers can smooth out milk (lactation) and prevent infection of the mammary gland.
    Pharmacological effects and Andong Ingredients Active Ingredients (Cordyline fruticosa)
    Soothing pharmacological effects, stop bleeding, antibacterial, slightly sweet, destroying frozen blood, and antiproliferative (preventing cell growth in cancer and tumors). All the effects were caused by a variety of active ingredients contained by the plant’s red horse cart. The content of the active ingredient (a chemical compound useful medicinal) plants were thought to have come from Asia and Australia, these include the saponin, timidine, tannins, flavonoids, polyphenols, stereoida, polysaccharides, calcium oxalate and iron.
    Tips and Other Information about Plant Andong
    This plant should not be used by pregnant women, because many sources are mentioning that the carriage is used as an herbal ingredients for abortion (abortion) in the South Pacific, as well as in New Caledonia, Tonga, and Vanuatu.

    The use of red buggy plant for treatment should be through consultation or supervision of a herbal (traditional medicine) although there are no more records about the dangers of using these plants as medicines other than those mentioned above. Herbal prescriptions and the proper dosage of course also be required to get optimum benefit from this plant.

    10 Must-Have Tools for the Busy Teacher

    This year was uniquely challenging for me. I had my biggest class ever (28 students) , and I was co-teaching all day with teachers and paras from the special ed department–also a first. Meanwhile, I started working on my PhD, and my toddler constantly kept me busy. My plate has never been so full!

    If you’re a teacher who often feels pulled in every direction, then this list is for you. These are my top 10 tools for juggling it all. Hopefully you’ll find some to use as well!

    1. Nozbe

    Nozbe is the ultimate task list manager. You can organize by projects — school, work, home, etc., create recurring tasks, and so much more. I can access it from any device, add attachments, and email stuff to my to-do list. I started out with the free version, and I quickly upgraded to the paid version. At $96/year, the paid version has a hefty price tag, but this app was SO much better than any other task manager I’d tried, and it’s been worth every penny. If you’re someone who has lots of projects going at once, this app is worth exploring.

    2. Evernote

    This is my brain online. All of my coursework and notes are in Evernote, and all of my anecdotal records and student work samples are in here as well. I was able to use the free version for many years, and then once my husband and I decided to go digital with all of our financial documents, etc., I upgraded to the premium version. At $35/year, it’s pretty affordable.

    3. Dropbox

     I don’t think I could function without Dropbox. I switch between so many devices between work, home, and school each day, but Dropbox allows me to keep track of everything. All of my lesson plans, TpT purchases, readings for class, and more are in my Dropbox account. I’m still living off of the free space, but I’m getting the daily reminders that my Dropbox is nearly full. Might need to upgrade that soon, too. Premium accounts offer 100 GB of storage for $99/year.

    4. GoodReader


     I’ve used this app a lot with my students, but I’m finding it to be totally clutch for my grad school stuff, too. I’m doing tons of research for my courses and scoping out dissertation ideas, and GoodReader allows me to annotate all of the PDF’s I’m amassing. I’ve created a folder on Dropbox for all of the articles I’ve gathered, and I can sync that folder to GoodReader so I can read it all on my iPad. I can also send it back to Evernote when I finish. One of my dear friends told me that I’d have laundry baskets full of research cluttering my house while I worked on my PhD, but not so…It’s all electronic!

    5. GoogleCalendar

    I have a variety of calendars on Google — class schedules, deadlines, school events, etc. Some of these I share with my husband so we can both be aware of each other’s events. Other calendars I share with my students and their parents so they can be aware of upcoming events and tests. I like that all of my calendars are color-coded so I know which calendar I’m looking at, and I can select/de-select different calendars to narrow my focus if I’m looking for something in particular.

    6. YouCanBook.Me

    This free site allows me to share portions of my calendar with parents so they can schedule parent-teacher conferences. I choose the days they can see, set the times they can schedule, and manage the maximum time blocks they can reserve. They don’t get to see any of the events on my calendar, just whether I’m available or not. If they reserve a time slot, it will automatically add it to my calendar and send me an email. It’s eliminated the back-and-forth process of conference scheduling and allowed me to manage my time better.

    7. Planbook.com

    Since I was co-teaching this year, I needed to find a way to share my plans easily from week to week. I tested out Planbook in August, and I loved it. I like that you can extend or bump lessons, attach files, and customize the fields that appear. It’s a great resource that’s keeping me much more organized. You can get a free trial of it before paying the $12 for an annual subscription.

    8. Typinator

    This is a tool that’s new to me, but Typinator is a text expander tool. There are several pieces of text that I find myself typing or copying/pasting over and over. Typinator allows me to create typing shortcuts for all of those. For example, if I want to type my blog address as a hyperlink when I comment on someone’s blog, I can simply type “~bl” and it will place the text there for me. I also use it for standard replies to emails such as when parents email me to say their child will be absent. I can type “~abs” and it will write: “Thanks for letting me know about the absence. I hope your child is feeling better soon! Today’s assignments will be posted on our class website, and let me know if there’s anything else you need.” Four key strokes = all of that. I find typing way faster than using the mouse, so this is a time saver that quickly adds up. It’s only available for Macs, and it’s priced in Euros (converts to around $36 US), but I use it all the time.

    9. GoodReads


    Distinct from GoodReader, GoodReads is an online community surrounding books. It allows me to keep track of the books I’m reading and which books I want to read next. As I’m starting my dissertation research, I’m constantly finding book titles that I want to check out. Similarly, there are lots of teaching books and children’s books that I want to investigate someday, and GoodReads helps me organize all of that. Best of all, I can use its scanning feature to scan barcodes when I’m browsing in the bookstore.

    10. Edmodo

    I used Edmodo a lot for collecting student work and grading tests/quizzes this year. It managed all of the submissions and kept the work organized for me so I could be more efficient with tracking these things. It also allowed me to create assignments, give and grade quizzes, communicate with students and parents, and so much more. This is a great free learning management system that was a centerpiece of my classroom this year.

    With the exception of Typinator, which is only on my computers, all of these apps are cloud-based or mobile-friendly so I can get to them from any device. When I’m shifting between my iPhone, iPad, laptop, and desktop, that’s critical. I may be busy, but I can get to my projects anytime, anywhere, and I’m not hauling around tons of materials everywhere I go. These tools boost efficiency and minimize life clutter.

    What are some tools you’re using this year to help with productivity? I’d love to hear more recommendations in the comments.

    This post contained some affiliate links meaning that if you click on the link and purchase the app, a small part of your subscription cost will go to me instead of entirely to the company. I’m only recommending products that I highly use and pay for myself, however, and I hope you’ll find value in these resources as well. 

    WORKOUT ANYTIME on Cincinnati.com

    WORKOUT ANYTIME on Cincinnati.com

    The article was written by Cincinnati Enquirer Business Reporter Bowdeya Tweh and was based on interviews coordinated with Tony Petrocelli and WORKOUT ANYTIME Vice President of Development Randy Trotter. The article begins with details about the opening of the WORKOUT ANYTIME in Montford Heights. The article gives information about the gym and about the company, as well as information on development plans in Ohio.        
    Workout Anytime

    You can view the full article here, and view contact information about WORKOUT ANYTIME’S new gym in Montford Heights here.

    WORKOUT ANYTIME in Buffalo Grove Patch

    WORKOUT ANYTIME in Buffalo Grove Patch in an article titled, “24/7 Gym Opens in Buffalo Grove.”  The article opens with some details about the opening of the Buffalo Grove WORKOUT ANYTIME, and the plans to open up to 25 clubs in the Chicago suburbs. Jeff and co-owner Eric Nagel are quoted about why Buffalo Grove is a great place for the first WORKOUT ANYTIME in Illinois. Cristel gives details about what WORKOUT ANYTIME offers and about the upcoming grand opening, and then provides info and quotes from Steve and John.  Click here for the entire article or begin below.

    24/7 Gym Opens in Buffalo Grove
    By: Cristel Mohrman

    Workout Anytime might be a new name in town, but it’s one that company officials expect will soon be widely recognized.

    The fitness center officially opened Saturday at 700 S. Buffalo Grove Grove Road. It’s the company’s first location in Illinois, but it certainly won’t be the last, said Workout Anytime officials, who are planning to expand to 25 clubs in the Chicago suburbs.

    Buffalo Grove was selected as its first Illinois site for its demographics and because officials found little competition for the concept, which offers members all-hours access to no-frills workouts.

    “We really like this location a lot,” co-owner Eric Nagel said.

    (Read More)

    Merry Christmas – And Happy New Year, from The Game Tips And More Blog [Wallpaper Greetings]

    I just wanted to take a moment to say, no matter what you are celebrating at this time of year (or not), no matter what games you are playing (or not), no matter what you believe or who you are (or aren’t), I want to wish you, my dear reader, a heartfelt Merry Christmas and All The Best in the New Year.

    To celebrate at this time, I want to share a Desktop Wallpaper I threw together, captured in Planet Coaster, after taking some time to festively decorate King Coaster’s ‘Festive Funlands’ Park (Gingerbread Night Scene with added Lights, Decorations and Greetings). Take care all – and See You In The New Year!

    Sincerely,

    Troy from The Game Tips And More Blog


    ~ P.S.
    Don’t forget to check out some Game Sales going on all over (Steam, Origin, Good Old Games (GOG), HumbleBundle, and more – even local stores/retailers – have fun out there)!

    How to Create a Lower Body Band Training System

    Resistance training bands provide a great strength curve that matches the lower body strength curves nicely.   Specifically, the more you stretch a band the higher the level of resistance you have to overcome.   In the case of the key lower body movements such as squats, deadlifts and lunges this matches the strength curve of these key movements meaning that the muscles are capable of producing the highest levels of force at the top of the movement when joints are extended and muscles in their shortest position.
    The trick is how to apply band resistance to these movements and other functional movements such as jumps.  While there are many different techniques for accomplishing it – one of the best is to create your own lower body band loading system using a large band as a belt and smaller band/s looped through it and onto your feet to create load from the hips down.

    This system puts no load on the spine,  and it is easy to increase or decrease load based on band sizes used and number of times you wrap the band around your feet.
    It travels with you as you move for extra load for all lower body movements including squats, lunges, and deadlifts.    It is also a portable jump training system that is easy to create, and for facilities with the reACT Trainer it is a fantastic way to create additional overload on the reACT Trainer while keep the hands free!

    Click here to see step by step instructions for how to use bands for this set-up:   https://www.youtube.com/watch?v=zkAMGtjkVm4

    Low-carb lifestyle guidelines

    By now you should have a pretty clear idea of what you have to do to improve your diet and, with it, your entire lifestyle.

    The general principles

    Cut out all unhealthy refined carbohydrates.

    • Curb your intake of high GI carbohydrates and focus on those from the low—medium GI range.
    • Eat most of your fruit and vegetables raw to ensure a good level of phytonutrients and fibre.
    • Eat more high-quality protein — organic if at all possible.
    • Increase your intake of healthy omega-3 fatty acids by eating more oily fish, and use only natural unrefined oils in your cooking.
    • Cut out tea, coffee, concentrated fruit juices and alcohol, and banish soft drinks of any kind, but drink at least eight glasses of water per day.
    • Incorporate 30-45 minutes of aerobic exercise at least three times in to your weekly routine, and carry out resistance training at least three times per week.

    Diet Start

    DIETARY MYTHS

    Myth: skipping meals is a good way to lose weight.

    Fact: your body needs a regular supply of nutrients each day in order to work properly. If you skip meals, you will be more likely to make up for it by snacking or eating more at the next meal. Studies show that people who skip breakfast tend to be heavier than those who eat a nutritious breakfast. A healthier way to lose weight is to eat many small meals throughout the day.

    Myth: eating after 8 pm causes weight gain

    Fact: it doesn’t matter at what time of day you eat; if you are eating too much of the wrong type of food and not getting any exercise, that will make you fat.

    Are you all fired up?

    You should be, because you are going to get back in control. You now know what you are doing, understand your body and should look on this as an important project that will bring untold benefits. Now that you understand how your body metabolizes the food that you eat, you can start to view food as a vital fuel that helps your body function at optimum levels. This should be a turning point. It should change your attitude from one of ‘Oh no, I’m on a diet’ to a more positive ‘I’m doing this for me, to make myself healthier, fitter, stronger, leaner’.

    Pretty soon you are going to be feeling and looking better. Think of that boost of self-confidence that you are going to experience. So get ready to roll and flex that determination. Whether you have 3kg (71b) to lose or 30kg (701b), this regime is only going to work if you are committed to changing your eating and exercise habits for life.

    The rest of this section offers advice on weight, and on setting goals for (and managing) weight loss; suggests how to cope with the cravings and snack attacks that may arise when you are on a diet; and gives tips on taking supplements and sticking to a healthy diet, even when you lead a busy lifestyle. It is followed by the three-step programme and nutritious recipes that form theMainstay. Plus, there is also a section on adapting the plans to suit a vegetarian diet, which includes some delicious low-carb vegetarian recipes.

    DIETARY MYTH

    Myth: low-fat or non-fat means no calories. Fact: many low-fat and non-fat foods still contain a lot of calories. Often these foods also contain extra sugar, flour or starch thickeners to make them taste better. These ingredients all represent extra carbohydrates. As we have seen, you need to eat healthy fats to lose extra fat.

    “Can You Guess Where The Screenshot Below Is From?”, The Game Tips And More Blog’s Game Screenshot Identification Contest, Re-Happens Again Today! [Updated 2018-03-02 with Answer Image]

    It’s the 15th of the month – and it is time for something that I re-re-started up, just last Month – The Next Installment of The Game Tips And More Blog’s ‘New-ish-sorta-but-not-really’ Contest:

    “Can You Guess Where The Screenshot Below Is From?”

    (A Game Screenshot Identification Contest)

    Having its’ Fifth Edition now, today – February 15th, 2018!

    All you have to do to win this contest, is contact me in any way you can (eg. Comment on this article
    below, Twitter profile tweet, email me or Comment/PrivateMessage TheBlog’s Steam Account by the end of the month, with these two items within your message:

    1. Your guess for the game the image is from.
    2. Information on how to contact you back (to receive Steam game gifts, etc) if you win.
    That’s it!
    **[Just a quick note to be careful not to include any information you do not wish to share ‘publicly’ when posting in the Comments area below or at Steam or sending a Twitter profile Tweet, as these messages are seen by ‘everyone’]


    The first correct answer submitted by a Skillful Identifier/Gamer will receive this month’s contest prize – which is: a gifted game from the Steam online store!

    [Note: Although I have been collecting Games on Steam over the past few Years, during Steam Sales,
    due to how Steam has changed Gifting games through Steam recently, you will have to temporarily become a Friend
    of TheBlog’s Steam Account (to receive the game – after receiving your Gifted Game, you may Unfriend of course)]
    Winners will also be announced in bold, large lettered-text, here on this posting and will thereby be immortalized on The Intertubes in perpetuity, proving to all other comers that you were “The Ultimate Game Screenshot Guesser Thingy Person” [aka. Gamer]!

    Previous Editions of this Contest [to ‘see how it works’] can be found at TheBlog, here:

    Can You Guess Where The Screenshot Below Is From – Contest #1
    Can You Guess Where The Screenshot Below Is From – Contest #2
    Can You Guess Where The Screenshot Below Is From – Contest #3
    Can You Guess Where The Screenshot Below Is From – Contest #4

    Are you ready? Here then, is the Screenshot image for this month, below:

    [As you can see, the image is a portion of a full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

    After a week has gone by, if there is no correct guess as to what game the Screenshot is from, I will return here and put up a ‘Hint’ image – a larger portion of the Screenshot – to assist in Game Recognition-ing-ism…

    Update!

    A week has gone by and there have been no correct guesses received yet… So, here is a HINT image; (an enlarged area portion of the already-slightly-larger-than-normal CONTEST Screenshot for this month’s Contest)! Ready?

    Here is the HINT image (with enlarged portion revealed), below:

    [Click the Image to see it at a slightly-larger Full Size – and as you can see, the image is still a portion of the full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

    At the end of the Month, if noone has guessed correctly by then, I will return here and reveal the full Mystery Screenshot and the Game it was from – Good Luck, Gamers!

    Update!
    It has been two weeks since the Contest began and there have been no correct submissions! Aww….

    To end The Mystery, here is the answer for February’s edition of
    ‘Can You Guess Where The Screenshot Below Is From’ (2018-02):


    The Answer for this month’s Contest was: Just Cause 2!
    [Captured in 2014, this Screenshot I took was back when I was playing games at 1600×900 – which is a ‘sweet spot’ I personally recommend [by my own testing] for Mid-Range GPUs (VideoCards). This was JC2 being played with a GTS 250, the ‘Black Knight Edition’ from ASUS which I paired at the time with an AMD X2 245, iirc**. Wow, I have been planning this identification game a long time – never getting around to it for a while of course – haha]
    Click to see Full Size
    Come back next 15th-of-the-month friends, when you can have another chance to be a Digital Screenshot Sleuth in the Sixth Edition of ‘Can You Guess Where The Screenshot Below Is From’ – and a chance to win the Prize that will be carried over to next time: a gifted game from the Steam online store!

    See You In The Games!

    [**Note: I am not affiliated in any way or degree with NVIDIA or AMD, and I have not and will not receive any compensation of any kind, for mentioning them here. I am merely an enthusiastic user of both companies’ products. I have utilized both and will continue to use both in the future ((on a personal note, I find I usually am ‘stairstepping’ with their GPUs, purchasing from one manufacturer, then the next ‘upgrade’ purchasing from the other, heh. I always Suggest to people who ask; to get whichever has Features you like – and only what you can afford at the time – it will be outdated in 3 years or so anyway; Enjoy what you have and be thankful because there are always people who have less!))]

    (The Game Tips And More Blog Contest Game #2018-02)

    The Vital Acid—Alkaline Balance

    Another important aspect of any diet for super health and beauty is one that most nutritional systems completely overlook. It is the question of using foods to help maintain the delicate acid—alkaline balance in your body. For we can reach truly positive health—health beyond the simple absence of disease—and remain permanently healthy only when the foods we eat supply us with a surplus of alkaline-reacting foods. These include green and root vegetables, avocados, fruits (including citrus fruits which, though acid, have an alkalinizing effect on the body), seeds such as sunflower, sesame, and pumpkin, and yogurt.

    Your body contains mineral salts. Some of them are alkaline and some are acid. In a healthy body the ratio between alkaline and acid is four to one—that is, 80 percent alkaline to 20 percent acid. To maintain this natural balance, you need only to eat foods which, when digested, produce alkaline salts in approximately these proportions. If, instead, you eat a diet that is highly acid-forming, as the typical Western fare is, then your body is forced to work very hard indeed to regulate the internal acid—alkaline balance and keep your blood slightly alkaline. Without this natural slight alkalinity, your body is unable to repair tissues and heal itself. Overacidity can lead to acidosis, chronic indigestion, irritability, nervousness, excess appetite, rheumatic and arthritic conditions, as well as skin problems and cellulite. Stress, too, is an acid condition. The acid- forming foods, which should make up 20 percent of any diet but no more, include meat, eggs, hard cheese, bread, cereals, sugar and honey, some nuts, and some fats. Coffee, ordinary tea (not green tea or herb teas), and alcohol are also acid-forming.

    Diet Start

    To give you some idea of what it feels like when your body is too acid, think back to the last typical “good” breakfast you ate—processed cereal with sugar, perhaps an egg, bacon, white toast and jelly, and coffee. Do you remember the immediate feeling of stimulation followed in an hour or two by an unpleasant sense of jangly nerves or tiredness, so that by eleven you had to reach for another cup of coffee to keep yourself going? That is an acid state. In fact, this breakfast is made up of almost all acid-forming foods—the bacon, the white toast and the coffee, the packaged cereal, sugar and so forth. A far better breakfast would be a bowl of Birchermuesli (not the kind of muesli you find in supermarkets, which may be labeled “natural” but is chock-full of sugar) made from natural yogurt, a tablespoonful of rolled oats, a couple of teaspoonfuls of honey and a little cinnamon. On such a breakfast where the fresh fruit and yogurt, which are the alkaline-forming foods, balance the small quantities of acid-forming foods—the grains and the honey—to maintain the ideal ratio of 80 percent alkaline to 20 percent acid, you will find you can work well throughout the morning without suffering “acid rebound.” Your body will also be protected against the unnecessary stress of having to work hard to rebalance the blood.

    Forget the Salt

    Recent studies indicate that the daily sodium requirement for a human being is probably not more than 200 milligrams a day, perhaps slightly higher in someone who performs great physical exertion or in nursing mothers. This small quantity is available naturally in foods alone—vegetables, meats and fish, fruits, and grains for instance—without our ever having to add salt to our foods. Where we do add it, not only when cooking but also at the table, the average sodium intake is thought to be more than twenty-five times that amount. Thanks to the research of Professor Lot Page at Harvard, salt—the ubiquitous substance which the ancient Greeks considered divine—has now been shown beyond all reasonable doubt to be at the root of hypertension, one of our most common twentieth-century illnesses.

    HOW TO DECORATE WITH NO MONEY

    In the present times, the expenses are rising for everyone and this is the reason why budgets have become tighter. Having less or insufficient money, does not stop people from wanting things or wishing for them. The house is the place, where one spends the maximum amount of time and everyone wants that they house looks nice and attractive. There is a myth that if one wants to decorate or improve the house; they will need to spend a large amount of money.

    HOW TO DECORATE WITH NO MONEYThis is not true as it is possible to decorate the house or a room without any money also. One needs to be attentive and use their creativity and in this way they can make the house look nicer.

    One of the easiest ways to decorate a room or the house is to use everything that is already available in the house. One can use things which are packed off as of being of no use or one can use the things that are there in the room. Many times, just re arranging the furniture and the things in the house can create a new look altogether. Changing the color scheme of the room is also a good idea. One can use combinations of colors to create a new look. Throwing in new and vibrant colors in a room is also a good idea. New colors break the monotonous look of a room and help one change the way the room looks.

    Another way to change the way a room looks is to add a painting or a wall hanging to the walls. This is a great way as it gives a new dimension to the room. A plain wall does not look nice and adding something to it can give a great look as well. One should always work on the larger area of the house and then move to the small ones. The house can be decorated with existing things in the house, and one can easily use these and decorate.For example you can use some oriental rugs from bedroom to put under the coffee table from living room. It is not always necessary to buy new things and decorate. Using the creativity one can create focal points in the house, and use this to create a new look in the house. When the focus of a room changes, it itself gives a new life and a new look to the room and this is one of the best and the most affordable ways to decorate the house without money.

    The trip to Hyderabad India

    I am starting my next assignment on the 3rd of October 2009 in Hyderabad India. This will be my 4th trip to India in the last 2 years. Going to india is a funny thing for me as I cant wait to get there. Once I am there I get the feeling that I need to get back home (Sri Lanka) soon.

    I have applied for my visa nd waiting to collect it. will do it tomorrow.

    Ten Risk Factors That Cause Food Reactions (1-5)

    The primary cause of most food reactions is incomplete digestion. At almost every meal, we eat foods that we don’t completely digest. The results are disastrous. When we eat foods we can’t digest, we almost always have some type of reaction.

    Food that isn’t completely digested can enter our systems in large food macromolecules that cause a great deal of trouble. The body perceives these macromolecules of partly digested food as foreign invaders, similar to bacteria, viruses, or parasites. Then the body attacks them with the full force of the immune system.

    This immune inflammatory attack creates the symptoms that you hate: fatigue, weakness, heartburn, aching joints and muscles, nasal stuffiness — and false fat.

    There are several factors that most often cause incomplete digestion. To get started on the False Fat Diet, you’ve got to understand these factors and avoid them. In order of importance, here they are.

    Risk Factor 1. We eat too narrow a range of foods.

    It’s estimated that the average person gets about 75 per cent of his or her calories from just ten different foods. Most of us have our favourite foods, such as wheat and dairy products, and we rely on them far too much. When we overeat any one food, we exhaust our body’s ability to fully digest it.

    Diet Start

    Risk Factor 2. We eat too many fake foods.

    We eat synthetic foods, such as fake fat and artificial sugar, that are manufactured in factories. No wonder we can’t digest this stuff! Furthermore, most of our packaged foods have been crammed with chemicals that human bodies cannot adequately metabolize. Often, a synthetic food has a long shelf life precisely because it can’t be broken down by nature.

    Risk Factor 3. We have digestive enzyme deficiencies.

    Many people are dangerously low in the enzymes that digest food. Even when these people eat healthy foods, they don’t have enough pancreatic enzymes to break the foods down properly.

    Millions of people haven’t been genetically endowed with the right digestive enzymes to thrive on a modern, industrialized diet. For example, African Americans are ten times more likely than Caucasians to lack the enzyme that breaks down milk. Because a lack of enzymes is a common problem, the False Fat Diet generally includes supplementation with specific enzymes.

    Another cause of enzyme insufficiency is our failure to ingest the natural enzymes that exist in foods. Many whole, unprocessed foods automatically come with the enzymes that are needed to help digest them, but before we eat these foods, we often kill the enzymes by cooking, processing, irradiation, and storage.

    Because it’s important to eat foods with live enzymes still in them, patients on the False Fat Diet tend to eat a lot of fresh, whole, raw foods.

    Another critically important digestive substance that millions of people lack is stomach acid, or hydrochloric acid. Unfortunately, production of this acid decreases as we age, which is why indigestion is more common among older people. Many people mistakenly think they have too much stomach acid, because they often get heartburn — but the opposite can be true. Heartburn can also be a sign of low acid. When you don’t have enough existing stomach acid from day to day, your stomach secretes too much when you eat to make up for the deficiency. Later on, I’ll tell you how to fix this deficiency.

    Risk Factor 4. We eat food that is too refined.

    Too much of our food is stripped of fibre and then shredded, pulverized, powdered — and finally stuck back together again with gluey fillers. By the time we eat it, it’s not much more than a predigested mush of starch and sugar. Unfortunately, this excessive processing often allows the food to rush into the bloodstream before it undergoes the complete digestive process. If this ‘predigested’ food still had its fibre, it would stay in the gut long enough to be fully digested, or it would be carried all the way through the system by the fibre and eliminated. Because of this factor, I urge people to avoid overly refined foods.

    Risk Factor 5. We create our own intestinal problems.

    One of the most common and harmful of these problems is a condition that allows undigested food macromolecules to slip through the intestinal wall. This condition is called ‘leaky gut syndrome,’ and doctors have only recently realized how hazardous it is. A leaky gut‘s wall is more permeable than it should be.

    This permeability can be caused by eating chemical additives and also by drinking coffee or alcohol with meals. If you’ve noticed that you most frequently have food reactions when you have a cocktail with dinner or coffee with breakfast, you may have leaky gut syndrome.

    Another primary cause of leaky gut syndrome is overgrowth of the natural yeast Candida albicans. Candida is usually present in the body and is mostly found in the mucous membranes — especially those in the intestines. It normally stays in balance with other healthy bacteria, but it can get out of control and increase gut wall permeability. It proliferates if you:

    • Take antibiotics, which kill all bacteria.
    • Take birth control pills.
    • Take steroid drugs.
    • Eat foods, such as sugar, that cause yeast to multiply.
    • Eat things that contain lots of yeast, such as bread and beer.
    • Have impaired immunity.

    Candida is a major cause of bloating and often causes a ‘beer belly’ look. In fact, I think that many heavy beer drinkers with beer bellies aren’t nearly as far as they look, but are just swollen with candida, reactive gas, and fluids. I had one patient who lost his beer belly in a matter of days on the False Fat Diet. He was thrilled with his quick response, and it motivated him to stay with the diet.

    Spotted in a hoarders driverway

    the front yard was covered in a variety of junk.

    Just run across this while out walking about. I think behind it’s a Corvette, and in front of it was a 1990 is Firebird GTA 

    Teacher Toolbox Trio Linky Celebration!

    Since the advent of Teachers Pay Teachers, my teaching toolbox has changed quite a bit. There are so many things that I’ve made or bought for my classroom, and there are many others that are on my wishlist. To recognize that, I’m hosting a Teacher Toolbox Trio linky party.

    Here are the rules of the trio:
    1. Share a product that you’ve made that you couldn’t live without.
    2. Share a product that you’ve purchased that you love.
    3. Share something from your wish list that you’re hoping to get for next year.

    If you’re not a seller on TpT, no worries — just share two products you’ve purchased that you love!

    1. Something I’ve Made

    The Classroom Economy Megapack was my first major project for TpT, and without question, it was the one that I used all the time last year. It has everything I needed for setting up my classroom jobs, monitoring daily behaviors on a clip chart, running my classroom economy, and giving students free/very low-cost rewards. Unlike my units that were used here and there, this was on display in my classroom all 180 days, and my kids loved it. This is the one thing that I could not live without.

    2. Something I Purchased

    Erin’s “A Roller Coaster Day” sub plans were amazing! I had to go to an all day district committee meeting on a Friday in May when the kids were already getting a little crazy, but they LOVED this. The sub said it kept them engaged all day, and given that I was already at the stage of the year when all of our required curriculum had been taught, it was perfect. It will be a permanent addition to my sub folder, and she’s also made one for grades 5-6. You can follow Erin’s blog: I’m Lovin Lit. 

    3. Something on My Wish List

    I’m really planning to focus on math facts and mental math skills early in the school year, and Laura Candler’s Mastering Math Facts has been on my radar screen for a while. I’m hoping to snag a copy before I go back in July. (Yes, July!)  Laura’s blog is Corkboard Connections.

    The Linky Celebration

    This is more than just a party — it’s a celebration! I’ve been meaning to do something to celebrate hitting 100 followers for a while now, and as I near the 150 mark, it’s definitely time! If you link up through the tool below, you’ll be eligible to win a $25 gift certificate from Teachers Pay Teachers — enough to possibly clear off some items from your own wish list!

    clip art from KPM Doodles
    I’ll be using a random number generator to select the winner from those who link up. The linky celebration will end next Friday, June 14 at 11:59pm EDT and the winner will be announced on my blog on Saturday.
    Can’t wait to discover some new products and see some of your favorites! Be sure to link up below, and please include the Teacher Toolbox Trio icon and/or another link to Eberopolis in your post.

    Happy linking!
    document.write(”);

    7 Tips Naturally Healthy Diet

    7 TIPS NATURALLY HEALTHY DIET

    7 Tips Naturally Healthy Diet – Have an ideal body is a dream of all people especially the women. But not a few of them who has a weight of more or obese. Not only can reduce confidence but it can also be bad for health, because there are some diseases that come from excess weight.
    7 Tips Naturally Healthy Diet - 1
    Tricks and Tips Healthy Diet to Lose Weight
    One cause of the excess weight that style or pattern of unhealthy living. So from now care about yourself by changing bad habits to get the ideal body. Okay let us consider a healthy diet tips from abouthealthbenefits.xyz following:
    1. Intention
    Do not delay if you plan to lose weight, because if delayed continues to weigh increasingly grow and you will feel lazy. Do it now because the earlier the better the result.
    2. The Purpose of the Diet
    Having no intention of course you have a goal, it aims to facilitate you reach the desired weight. Well to add motivation to be more excited, choose clothes or the clothes you want to wear in place that often you see.
    3. The Adequate Calories
    Everyone needs 1,200 to 1,500 calories for the body to keep fit. Lack of calories can have a negative impact on the body, as can slow the body’s metabolic system. Due to inhibition of metabolic processes that can make the accumulation of fat in the body accumulate or settle, so you gain weight.

    7 Tips Naturally Healthy Diet - 2

    4. Advancing the Breakfast Hour
    Do not let you postpone breakfast in the morning, because a study revealed as many as 4000 people successfully lose weight for breakfast. Well if you are used to breakfast at 9 then change it to 7am. It is intended that fat burning occurs earlier and faster. But you need to remember, too, should choose the type of meal that is high in fiber and low in fat or equal to 300 to 500 calories each morning. Then make it a habit to chew eat as much as 36 times per scoop / bribe. This is because, the more chewing it will be easier for the body to process food. Not only that the process was easy satiety effect.
    5. Consumption of Fiber
    Fiber is a substance required by the body and has many benefits such as expedite the process of metabolism, increase / protect the gut works, launched at the same time drive out fat expenditure feces. The fibers can be obtained by eating lots of green vegetables and fresh fruits. Because the adult body requires 21 grams of fiber / day.
    6. Drinking Mineral Water
    Water is the lowest water with a myriad of benefits. Lack of fluid (dehydration) can disrupt the metabolism in the body, resulting in body fat accumulating. Consumption of 8 to 10 glasses of water every day to keep the body always, in addition to the drinking water before meals can suppress excessive appetite and satiety for longer.
    7. Doing Sports Activities
    These activities may be most reluctant to do, but did you know? Exercise has benefits that are so outstanding that can help you lose excess weight. Choose the type of exercise you prefer, it aims to make it easier to do so. Sports that can quickly help lose excess weight as the combined aerobics, jogging, walking, swimming, cycling. Perform sports activities routinely and regularly 3 to 4 times a week for 30 minutes and can be added if you start to get used to doing.
    Now that’s some tips on a healthy diet to lose weight naturally effective. May the above information can be useful and can help you to make a safe diet. Do not forget also to avoid the use of slimming drugs, not necessarily because your body can take it well.

    Hopefully article 7 Tips Naturally Healthy Diet we share today can be beneficial for you. Do not forget to always been in abouthelathbenefits.xyz and find more health articles. Thank You.

    Georgia Bloggers Blog Hop

    It’s time to teach the country about yes ma’am and ya’ll.
    Down here in Georgia, we talk with a drawl.
    We’re bringing you some freebies as sweet as our tea.
    Enter our contest, you might get some things free!


    I moved to the Atlanta area eight years ago when my husband decided to go to law school at Emory. It didn’t take long for us to decide that we’d say goodbye to the cold Michigan winters and make Georgia our permanent home. 


    We eventually settled in Decatur, a quaint suburb of Atlanta, and we love our little town. Decatur has more festivals than any town I know, and we have a thriving downtown with local shops, concerts, and amazing restaurants. We’re minutes from downtown Atlanta, but we’ve somehow captured a small town feel, and I love it. 

    Image of Concerts on the Square in Decatur via visitdecaturga.wordpress.com

    This weekend, we’ve paused from our peach picking to give you a taste of Georgia. Twenty-five teachers invite you to take a road trip through our southern state. Hop through our blogs to get freebies.
                                              
    This weekend only, I’m giving away my Standards for Mathematical Practice posters from TpT for FREE! You can pick up mine just by clicking here. 



    My entire TpT store will also be 20% off this weekend only — June 20-22, so check it out! 

    We’d also like to give you a chance to win a bushel basket full of our products. To enter from my page, you just need to follow my blog on Bloglovin’. Already do that? I’d also love for you to follow by email in the link at the top! You can enter once from each person’s blog.

    a Rafflecopter giveaway

    a Rafflecopter giveaway

    So what are you waiting for?! Time’s a wastin’. Go get more free stuff and sign up to win!

    An InLinkz Link-up

    Number Talks Book Study – Chapter 2

    The farther I get into the book Number Talks, the more excited I am about implementing them next year. This is such a great resource, and I’m only on Chapter 2!

    I’m linking up with Misty at Think, Wonder, & Teach for her fabulous book study. If you haven’t checked it out yet, be sure to visit her because she’s already offering some great resources to support the book (whereas mine are still works in progress!).

    This chapter walks through some of the nuts and bolts of setting up number talks, and it describes how to manage some of the procedures and expectations. One of the sections that really resonated with me in this chapter was about building accountability with the students. So often, there are a few students who are eager to share their mathematical thinking, and there are many others who are willing to sit back and let those students shine. I don’t like pulling sticks with students’ names for something like this, but I also don’t want students to feel like they don’t need to participate. This book offered some great strategies for dealing with that:

    1. Once all of the strategies have been shared, number them and have students show with fingers which one they found to be the most efficient strategy. This will get them thinking about the math involved.

    2. Keep records of the problems posed and strategies used, and label them with the students’ names. I plan to use my iPad to track this. I’ve talked before about setting up student data notebooks on Evernote, and I think that would be the perfect platform to track student participation. I can photograph students’ work and add anecdotal records about what I observe. It would also be easy to share with parents at parent-teacher conferences.

    3. Hold small group number talks throughout the week. As I prepare to transition into more of a math workshop/guided math approach, this seems like a very viable option.

    4. Create and post anchor charts of the different strategies that students are using. The book names a variety of strategies, or you could develop names with your students. Having the charts available to reference could scaffold the less confident students.

    5. Use exit cards. The authors recommend giving each student a notecard. On one side, students should record their solution, and on the other side, they should record a strategy that another student shared that they liked.

    6. Give a weekly computation assessment of 5-10 problems. The selected problems should reinforce the concepts and strategies introduced throughout the week. I can also imagine using an app like Show Me or Explain Everything to assess. These are whiteboard apps that allow students to record audio on top of their drawing. Students could record their solutions and narrate them as if they’re presenting them to the class. This would be another important artifact that could be saved in the student’s Evernote portfolio to share with parents or an RTI committee. If it’s only one problem, most students would be able to complete the task on the app in 5-10 minutes as the video they’d be creating should be less than a minute long.

    I think these accountability measures could be effective in getting students to participate more. Of course, the classroom environment will matter, too, and I look forward to setting those factors in place for my Number Talks this fall.

    In other news, I’m excited to share that I’ll be participating in Sabra’s book study of Word Nerds at Teaching with a Touch of Twang. Word Nerds explores strategies for teaching vocabulary to students, and it’s another fantastic resource. It’s published by Stenhouse, and you can preview the entire book online or you can purchase the book in Paperbook or Kindle edition.

    The book study starts on Thursday and runs throughout the summer. You can see the full schedule by clicking on the image above. I’ll be hosting Chapter 7, and I can’t wait!

    Also, have you joined in the Teacher Toolbox Trio Linky Celebration yet?

    You still have time to link up and be eligible to win a $25 Teachers Pay Teachers gift certificate! The linky celebration will close on Friday night, so be sure to join the fun. My wish list has definitely grown as I’ve seen all of the fabulous resources other teachers are sharing and recommending.

    the LA & Orange Country Dodge Dealers exhibition Daytona with a Keith Black hemi

    and it’s still around. Hasn’t had any magazine coverage in forever though. It’s mentioned online that it ran at Bonneville in 1969

    https://www.facebook.com/groups/1686223568321025/permalink/2080200002256711/

    BEAUTIFUL HOME FAMILY DESIGN “VILLA DE CHARME”

    Katrine Martensen-Larsen comes this stunning house designed for a family of seven children. We hope that this message will come in handy for those of you looking for new ideas for the nursery too. “Villa de Charme” is located in, Frederiksber Denmark and has been specially designed for a family of seven children. The designer said that this house is “evidence that many children and a hectic lifestyle does not mean you have to compromise on style.” The interior features original decorating ideas and news. The wallpapers are particularly interesting. White is used mainly to define the house and gives it an intimate feeling clean and fresh. bits of color are added here and there, crying the whole design. We really appreciate how serious, sober rooms alternate with play.

    BEAUTIFUL HOME FAMILY DESIGN

    BEAUTIFUL HOME FAMILY DESIGN

    BEAUTIFUL LIVING ROOM HOME FAMILY DESIGN

    BEAUTIFUL LIVING ROOM HOME FAMILY DESIGN

    BEAUTIFUL KITCHEN HOME FAMILY DESIGN

    BEAUTIFUL KITCHEN HOME FAMILY DESIGN

    BEAUTIFUL BATHROOM HOME FAMILY DESIGN

    BEAUTIFUL BATHROOM HOME FAMILY DESIGN

    BEAUTIFUL BEDROOM HOME FAMILY DESIGN

    BEAUTIFUL BEDROOM HOME FAMILY DESIGN

    Men’s Body Click Diet part 1

    In the summer the men had to cope with constant daylight, so they were missing the normal cues to go to bed. ‘When it’s daylight, even though it’s midnight or one o’clock in the morning, you don’t think of it as being the time to go to sleep,’ says Dave. ‘Your mind just says, hey, there’s work to be done. I may be tired but I’m not recognizing the need for sleep because it’s daylight.’

    Already lacking the strong time-giving effects of light, the men could not set their body clocks by what they were eating, either. ‘We had four meals a day. Two of them occurred at noon and midnight, the other two at six in the morning and six in the evening,’ continues Dave. ‘One of the difficulties in telling what time it was, was that the 6:00 a.m. and 6:00 p.m. meals were powdered scrambled eggs and the other two meals were stew. So if you woke up at six o’clock and went into the galley for a meal and you had powdered scrambled eggs, you didn’t know whether you were having breakfast or dinner.’

    Despite losing the signals that are normally provided by the cycle of light and dark, the timing of activity, intake of food, reasonable work shifts or even simple obedience to the clock, most of the men managed toget through without becoming acutely sick or injured. But some of them developed a condition they called Big Eye, in which they became stuck in a sleepless state. Almost everyone had duties that required exhausting physical labor, but even so, the men with Big Eye failed to sleep for days.

    Diet Start

    The men with Big Eye demonstrated that the body’s flexibility is a double-edged sword. The loss of essential time givers easily disrupted their circadian rhythms, probably setting them up for health problems if they continued down that path. On the other hand, proper application of some fairly simple rules for circadian health could have rescued them. And the same rules can rescue you from a potentially perilous state of disorganization.

    The Body Clock Prescription reinforces strong circadian rhythms; produces better sleep, enhanced moods, alertness and energy; and reduces the risk for reproductive cancers for everyone. In addition to these overall improvements in health and well-being, there are specific aspects of the diet that have a favorable impact on prostate health, a subject that provokes anxiety for many men.

    Prostate Ailments: The ‘Male Problem

    There is certainly cause for concern. Prostate ailments are an almost universal threat to men in Europe and North America. Among men in the United States, prostate cancer is the most common cancer; it is also the second leading cause of cancer death.’ In addition, countless men suffer from other prostate problems. This phenomenon represents a kind of `male problem‘ corresponding roughly to what used to be called ‘female problems’, a much less specific collection of gynecological woes that were lumped under this heading in the mid-1900s. The notion of female problems embraced excessive menstruation, infertility, irregular periods,cramps, vaginal discharge and other kinds of medical mischief that women endure.

    The male problem is more localized in the prostate gland, the part of the male reproductive system that secretes fluids that help transport sperm. Nevertheless, it is a fairly complicated picture, which includes inflammations of the prostate, a common condition known as benign prostatic hypertrophy (BPH) and prostate cancer.

    What’s more, prostate problems may lead you to needing a cystoscopy, where a narrow flashlight is inserted into the hole from which you pee until it arrives in your bladder. On the way, it passes through your prostate gland. Cystoscopy is a procedure that causes ‘big eyes’ in the bravest of men.

    Besides cystoscopy, the other method often used to examine men with prostate complaints is digital rectal examination, in which the examiner can feel the profile of your prostate gland. (Digital refers to the doctor’s finger, not his computer.) Both give much less information than you would expect to get from such relatively invasive procedures. Opening your mouth and saying Ah’ discloses much more about your teeth, gums, tongue and throat than any rectal exam reveals about your prostate, unless you have a huge lump. Ultrasound, magnetic resonance imaging (MRIs) and computerized axial tomography (CAT) scans are necessary to get a good picture of what’s happening to this gland, whose actual location on the floor of your pelvis seems mysterious to anyone who has not studied anatomy.

    Diet and Prostate Health

    If you look around you, especially as you get older and start hearing stories from men who have prostate trouble, you may wonder if there’s something simple you can do to avoid it. I’m not talking about early detection, which is mentioned frequently these days. (Of course, most men’s idea of early detection is that early next year or the year after would be just fine.) Nor am I saying that a good history, physical exam, measurements of prostate-specific antigen (PSA), a common blood test used to screen for prostate cancer and other indicators of your underlying health, prostate or otherwise, are not a good idea.

    But you’re misplacing your priorities if you go through those procedures without making some modest changes in your diet now to prevent troubles in the future. Most men who have a reasonably healthy personal and family medical history and who don’t abuse themselves with excesses of drugs, tobacco and alcohol, other risky activities or excessive inactivity can probably remain free of obvious symptoms even if they don’t implement all the points of the Body Clock Prescription. Some of these pointsare aimed at people who are trying to get out of serious medical trouble or who have risk factors that call on them to follow the diet very strictly.

    Naturally, the more closely you follow the Body Clock Prescriptionthe better, but if you do nothing else, I urge you to consume soy protein and flaxseed powder daily to prevent prostate problems. By making these simple dietary changes and keeping your mind open to the possibility that fungal infection, intestinal overgrowth or allergy might have a hand in any prostate inflammation that is not otherwise easily diagnosed by a physician, you can go a long way toward avoiding the possibility of getting prostate cancer, as well as the other problems that frequently lead men to undergo cystoscopy.

    3 Ways to Pamper Yourself When You’re Low on Time

    Have you ever heard the expression “There’s no tired like teacher-tired?”  I didn’t become a coffee drinker until I started teaching, and it seems like every teacher I know juggles way too many responsibilities. We teach, we parent, we study, we meet, we plan, and somewhere in that mix, we’re supposed to take care of ourselves and our families as well. Talk about a tall order! I’ve never been great with the work-life balance, but as I’ve been increasingly pressed for time this past year, I’ve learned to prioritize and find shortcuts so that I can still feel pampered despite feeling crunched. Today, I’ll share 3 of my favorites.

    1. Jamberry Nails

    I’ve seen bazillions of teachers blog about Jamberry before, and I’ll admit that I was skeptical. I love getting my nails done, but I lack the time and budget to do that with any regularity. Not to mention, manicures never hold up on my nails. They always smudge or chip within a day. Getting gel manicures has helped, but those take a long time to put on and take off. And usually, I destroy my nails taking them off, too, because I’m impatient. 
    In May, I tried Jamberry Nails for the first time, and I’ll never go back to anything else. They’re super easy to apply (20-30 minutes tops, and I’m slow relative to some people I know), and they last up to 2 weeks even with the heavy activity that comes with being a teacher, wife, and mom. Usually when I change them out, it’s because I want a new pattern and not because the wraps are coming off. For example, check out these awesome Halloween wraps (which will be going on my nails next):
    They look much more vibrant than any polish I’ve used, and they’re not expensive. A sheet of wraps yields 2-3 manicures + at least 1 pedicure. If you have really short nails, you could probably get more out of them. I always buy them using the buy 3 get 1 free deals, so it’s less than $5 for a mani/pedi for significantly less time and effort. 
    I like Jamberry so much that I just became a Jamberry Independent Consultant (mostly so I can get the consultant discount on my nail wraps — I want them all!). If you haven’t tried them yet, I’d be happy to tell you more or hook you up with a sample to try for yourself. You can find out more by visiting my Jamberry website and liking my Jamberry page on Facebook. Or just leave me a note in the comments section, and I can arrange for a sample to be sent to you.

    2. Gwynnie Bee

    As a plus-sized person, I’ve been super jealous of all of the cute teacher-y clothes that friends have been posting from Stitch Fix. But I finally found an alternative that I love in Gwynnie Bee. Gwynnie Bee is a clothing subscription service that is like the Netflix for clothes. You select a plan (I’m currently on 3-at-a-time), load up your “closet” with clothes you like, and sit back and receive outfits from your virtual closet. If you like it, you can wear it and send it back when you’re through with it or buy it at a discount. If you don’t like it, you can immediately send it back to exchange for something else from your closet. There’s no limit to how many outfits you are sent each month, and you can alert Gwynnie Bee that you’re sending something back so they’ll send you your next item.
    I love my Gwynnie Bee subscription for a variety of reasons:
    1. It’s convenient – The clothes are delivered to my doorstep, and they have a prepaid plastic envelope so I can send them back. I’m constantly getting new outfits to try.
    2. It’s a time-saver – I don’t shop nearly as much as I used to, and I don’t have to do as much laundry or dry cleaning because Gwynnie Bee takes care of it all. 
    3. There’s no guilt – Shopping for plus-sized clothes gets depressing because selections are always more limited or dowdy, and while catalogs offer better selections, I never know how it will fit me. Now, I can have clothes delivered and not feel bad sending them back if they don’t turn out as well as I’d hoped. 
    4. You stumble onto great dresses you’d never find otherwise. Check out this fab retro dress that I ended up buying:
    The minute I tried that dress on, my husband told me to buy it. Who could argue with that?!
    5. It’s perfect during transitions between sizes. I gained a bit when I had my daughter, and then I packed on a few more pounds when I started working on my PhD last year. I started Weight Watchers around Labor Day, and I’m already down 10 pounds (woo hoo!). I intend to keep on losing weight, but I don’t want to have to buy a whole new work wardrobe at each step along the way. Now I can just go in and adjust the sizes on the clothes in my closet (they have sizes 10-32). 
    Gwynnie Bee offers the first month free, and I highly recommend it. You can check it out using this link.

    3. Birchbox and Ipsy

    I started subscribing to Birchbox and Ipsy about a year ago. I’m not a huge makeup or product person, but I like trying new things, and it’s fun to get a package every month. It’s a small indulgence that makes me feel extra pampered. For example, this month, I received this amazing rosemary-scented shower gel in my Birchbox, and it’s something I never would have found otherwise. In my experience, Birchbox tends to have more high end products while Ipsy has larger midrange samples that come in cute bags. I look forward to receiving both.

    Treat Yourself

    The older I get, the more I realize how important it is to take care of myself. This is true especially when everything gets busy and chaotic between work and grad school and caring for my family. I don’t get to go shopping or go out for mani/pedis anywhere near as much as I used to, but I don’t need to. There are so many amazing services and products out there that you can treat yourself even when you’re extra busy. 
    Finally, while I’ve been trying to take more time to pamper myself this year, I’ve had some help in the “feel like royalty” department. I was shocked beyond words when I was named Teacher of the Year at a faculty meeting last week, and my dear friends went out of their way to make me a crown, a tutu, and a sash for the local homecoming parade last week. They even made a matching tutu for my 3-year-old (who loves tutus). I work with some pretty amazing teachers, and they definitely inspire me and push me to be the best teacher I can be. I’ll be sharing some of our amazing projects together in some upcoming posts, but I have to thank them for all they do for me each and every day. Loving what you do and where you work is the best kind of pampering of all. 

    The Game Tips And More Blog’s Ludo Ludi (Game Play) #1-3

    I wanted to start a video series that was Random Gameplay Video Clips that I have collected over time. I started out calling it FLASHBACK, creating a logo for it and everything; but I wanted a way to archive/share them out a little bit faster/easier, rather than ‘Featuring’ them every time, so I came up with the concept of “Ludo Ludi”.

    It means “game” and “play” in Esperanto. The idea was to not label the gameplay clips or state what they are, in order to have other people enjoy the “surprise reminiscence” of the games. Viewers could try to guess what they are for fun or just enjoy them as part of a playlist where they didn’t know what was coming next. For the most part it would be easy to guess them of course; if you played the game, you’ll know what game it is and what class I played, etc.etc. But, I still thought it would be entertaining to have a bunch on a playlist of some sort, with no obvious names, having a transitory video (without logos/intros) of something loopable such as static – as though changing the channel on a television – in-between videos. With Youtube’s Playlist and Randomize features, this can now be done and one can sit and reminisce on games of yesteryear with my video clips showing snippets of gaming moments recorded from a wide variety of games! Everyone with ADD/ADHD can just click the Next button on the playlist to skip to the next one if the current one isn’t holding their interest! Everyone is a winner! With this in mind then, I now present one long paragraph and the first three installments of :

    The Game Tips And More Blog’s New Gameplay Video Series, “Ludo Ludi (Game Play)”





    Enjoy and See You In The Games!

    good name and cute execution of the concept, Crushstation

    Knoxville News Sentinel featuring Kurt and April Nitzsche

    Knoxville News Sentinel featured WORKOUT ANYTIME owners Kurt and April Nitzsche.
    The online article includes a great picture of April showing one of her clients, how to use one of many exercise machines at the Maryville location. The story also ran in the print edition on the front page of the business section with a large two picture spread of Kurt and April.
    April Nitzsche explains to Robert Ridenour how to use one of many exercise machines at the Workout Anytime in Maryville on Thursday, January 16, 2014. April and her husband Kurt Nitzsche are the franchise owners of the Workout Anytime in Bearden and are now expanding into Maryville with their second location.         (SAUL YOUNG/NEWS SENTINEL)
    You can view the online article here. 

    WORKOUT ANYTIME in the Jacksonville Daily Record

    WORKOUT ANYTIME in the Jacksonville Daily Record

    WORKOUT ANYTIME was recently featured in the Jacksonville Daily Record. The article talks about the new WORKOUT ANYTIME that opened up Monday, October 6. The article talks about how the Levitt family looks to open 15 WORKOUT ANYTIME locations in the next 5 years in the Jacksonville area. 
    View the full article here. 

    Benefits of Figs for Health

    BENEFITS OF FIGS FOR HEALTH

    Benefits of Figs for Health – fig, known as ‘figs’ in English, ‘figue’ in French is not too popular in the country. For Indonesian people, the Christian community is known him with figs, while Muslims know him “Buah Tin”
    Common fig or fig (Ficus carica L.) is a kind of fruit-producing plants edible that comes from West Asia. The fruit is the same name. The name “Tin” is taken from Arabic, also known as “Ara” (figs / figs) while in English called fig (common fig; “fig tree common”), is still included relatives of a banyan tree of the genus same, namely Ficus.
    The sweet taste of fruit was rich in nutrients and has many health benefits. Although seasonal fruit is often available in dried form. It was also going to be sweeter in dry form and nutritious because it contains vitamins A, B, and minerals such as phosphorus, iron, calcium, and manganese.
    Here Are Some Benefits of Fruits Tin That May Not Know You By :
    Benefits of Figs for Health - 1
    1. Pectin, the soluble fiber can be found in the figs that are beneficial to the digestive system. This soluble fiber also helps clean out the cholesterol that accumulates in the body.
    2. Hypertension may occur if potassium levels are too high sodium and low potassium in the body. Common fig Fruits are low in sodium and high in potassium so potent prevent hypertension.
    3. Dried Figs contain omega 3 and omega 6 fatty acids along with phenol. All of it is useful to prevent coronary heart disease.
    4. Figs are also rich in calcium, so good for strengthening bones.
    5. Because rich in potassium, figs helps regulate blood sugar. This is beneficial for diabetics.
    6. Eat figs effectively treat a sore throat due to the high content of mucus.
    7. During this time, figs have also been used for the treatment of impotence. How, soak about 23 figs in milk overnight and eat in the morning.
    8. Because the iron content, figs useful to treat anemia.
    9. Creamed fresh figs and apply to face, leave on for 10-15 minutes. It is effective for treating acne.
    10. Eating figs can restore a sense of fatigue and increases brain power

    Benefits of Figs for Health - 2

    Such information about Figs or Benefits of Figs for Health can we share in this article. Hopefully this article Benefits of Figs for Health we share today can be beneficial for you. Thank You.

    The Benefits of Resistance Band Training

    Almost every gym goer has seen a rubber resistance training band and done at least one exercise using a band, but few people realize the many benefits of resistance band training done on its own or combined with other forms of resistance training such as weight lifting.
    There are many unique benefits to Resistance Band Training (RBT) including:
    RBT strengthens the neuromuscular system where its weakest, which is at the end of the range of motion.
    Allows exercise in true horizontal vectors (parallel to the ground/floor) where free weights can only create a vertical gravity resistance vector.    We move in three planes of motion and many different vectors, and bands allow us to train in all planes and vectors with load.
    Provides ascending resistance (gets harder the further a band is stretched) which teaches users how to accelerate concentrically (when projecting force) and decelerate eccentrically (when absorbing force).
    Deceleration (aka eccentric loading) always precedes acceleration (concentric unloading) in movement.  Bands elastic properties speed up the loading (eccentric) phase of every exercise, which, in turn, creates a greater need for eccentric control.    Eccentric strength is the key to an explosive acceleration or concentric contraction.
    Muscles are reactive by nature and obtain feedback from sensors that constantly measure muscle lengthening or tension development.   Free weight can definitely create vertical loading and feedback, but muscles need to be strong and reactive in all vectors not just up and down.
    Bands can be used to safely load movements such as running, jumping, swinging, hopping and kicking WITHOUT altering the mechanics of those movements.    It is difficult and sometimes dangerous to run, jump or hop correctly with any type of free weight on the body.
    Unlike free weight training, RBT requires you to train through the full range of motion which, in turn, requires a great workout load.   Free weights take significant effort to accelerate but momentum will be created unless moving the weight very slowly.    With properly done RBT exercise there is no momentum even with high speed movement!

    To learn more about bands and how to use them go to https://resistancebandtraining.com/

    5 Benefits to Working Out at Home

    5 BENEFITS TO WORKING OUT AT HOME

    5 Benefits to Working Out at HomeWorking out at home has become one of my favorite things to do. Don’t get me wrong, I love the gym! With the endless amount of equipment and the motivational environment, a good workout with my friends at the local gymis exactly what I need after a long day at work. That being said, there are some days where I’m too busy tomake it to the gym or just plain don’t feel like leaving the house after I get home from work, and that’s where it really pays to have some exercise equipment in the other room. I can literally take 15 steps into my spare roomand all of a sudden I have my own personal workout area ready to be rocked. It’s not only the convenience,though, there are a ton of other great benefits to working out at home! Let’s go a few of them together below.

    5 Benefits to Working Out at Home - 1

    Convenience
    The most obvious benefit of working out at home, which I briefly mentioned above, is how convenient it is! Thinkabout how many times in the past that you haven’t been able to workout for some inconvenient reason. You get home from work, tired from the day, and just don’t feel up to leaving the house to drive over to the gym. Or the opposite, you’re off work and super pumped to get a workout in and your gym is closed. Whatever the reasonmay be, with a home exercise area there’s nothing stopping you from getting a solid workout in. It can be in the early hours of the morning, the late hours of the night, and anywhere in between – all you have to do is walk into the other room to get started.
    Save Time
    This kind of goes along with the convenience aspect, but working out at home saves you some serious time!Let’s say you live relatively close to the gym and it’s only about a 10 minute drive. There and back is 20 minutes. Then while you’re there, you’re undoubtedly going to run into someone you know and chat for a while,and don’t forget those few times you have to wait because someone is using the workout machine you want.These might sound like little instances but before you know it, you’ve racked up an extra 45 minutes that you could’ve easily saved yourself with a home workout and instead spent that time on something else like relaxing or eating dinner!
    Freedom & Privacy
    This is probably my favorite benefit about having a workout area in my spare room; freedom to do whatever theheck I want in the privacy of my own home. You can wear whatever you want, say whatever you want, and playwhatever type of music you want. If you make funny faces while you workout (like me), there’s no one there to see it. If you want to blast Katy Perry at full volume (not pointing any fingers here), there’s no one who can tell you otherwise. The possibilities are honestly endless here, but the freedom and privacy aspect is what reallymakes a home workout so nice!
    Choice of Equipment
    There’s no denying that a gym is going to have more than enough equipment to get a great workout in, butgetting to choose your own equipment is a nice personal touch to a home workout area. There are tons ofdifferent types of equipment available nowadays that are made with homeusein mind, and with as picky as I am it’s cool being able to shop for myself and choose the specific products I want. It may be a bit of an upfrontcost, but it’s something I know will last me for the long term so the investment is well worth it! Take a look at HomeGymr’s list of the best home exercise equipmenttoget some ideas of your own and see what fits your style best!
    Nothing to Lose
    I mean this literally and figuratively. In a literal sense, people are always losing stuff at the gym. There’s areason why that lost and found section is so big. However, even with that in place, sometimes your stuff is there and sometimes it isn’t. When you’re working out at home, it doesn’t matter where you leave your keys and wallet,you know they’ll always be safe! In a figurative sense, there’s really no downside to having a home workout space, so you don’t have anything to lose by creating one of your own. It doesn’t take up much space, it’s lowcost,and you use it as you please.

    Hopefully the article 5 Benefits to Working Out at Home that we can share this day can be beneficial for you. Do not forget to always visit the website abouthealthbenefits.xyz to seek other health articles. Thank You.

    INTERIOR DESIGNERS NEW YORK CITY

    INTERIOR DESIGNERS NEW YORK CITY

    INTERIOR DESIGNERS NEW YORK CITY

    Are you planning an interior designers in New York City? Looking for the lights of New York City? A field of interior design flourishes at New York Medical Interior Design. This is a niche area of ​​design. The focus is that of furnishing medical care institutions must be given to patients not only the service friendly, but friendly design as well. The reason is that hospitals will not only try to repair the physical ailments of patients, but the psychological and spiritual well-being of the patient as well. The population is aging and the need for sensitivity to the design, construction and installation is becoming an important part of the management of age. responsive design provides some relief therapy and improved quality of life for retirees.

    Interior design students and professionals are increasingly aware of the medical concept of interiors in New York and other large cities. “Health professionals and designers believe that the concept of environment helps patients physical, mental and emotional wellbeing. What exactly does New York medical interior design involves what are the therapeutic and economic benefits? If medical services who wish to provide a therapeutic context, then what should be the development architecture? INTERIOR DESIGNERS NEW YORK CITY are important points interior designer must consider when creating a design for a medical center. If the installation activity promotion and creativity, so that should be incorporated into the design.

    The space must be organized so that patients have the privacy of your health care environment. Planting, lighting and colors have been used effectively to create a pleasant environment must not disrupt or interfere with the routine of the patient. Factors such as codes, regulations, and the money available for the design of medical affairs in New York interior designer, is responsible for knowing and following. There are several quality books on the interior of the doctor. If a medical institution on patients’ and Senior Care then they should definitely consult an interior designer experience in this field. If the search for textbooks in the field not to look over the books written by Jain Malkin. His research on the subject has led to a series of excellent books. Interior designers new york city research has resulted in more and better places for patients and those who work to change the appearance of buildings and health facilities.

    BEDROOM DESIGNERS NEW YORK CITY

    BEDROOM DESIGNERS NEW YORK CITY

    KITCHEN INTERIOR DESIGNERS NEW YORK CITY

    KITCHEN INTERIOR DESIGNERS NEW YORK CITY

    And More: Deals and Sales – Guild Wars 2 is $24.99 Right Now

    Woohoo! I have no idea when it started and no idea when it will end, but I just saw this with my own two eyes… if you are looking for one last reason to get GW2, it is now on sale for just under $25 American Dollars. That’s about £15 British Pounds if you are from the UK, руб890 Rubles if you are from Russia, 1500 Rupees if you are from India and what works out to be about $10,000,000 Canadian Dollars:

    I just might get my own copy finally and be able to stop begging others to play theirs (you know who you are)… Go to http://buy.guildwars2.com/ to get it while it’s On Sale and See You In the Game!

    The cars in Carroll Shelby’s personal collection are finally going to auction. June 3rd, at the Bonhams Greenwich Concours d’Elegance

    It’s too early to get good photos and a detailed description, it’s too early to even get the complete full list.

    But what little is known is that the following are in the 20 cars going to auction;

    A 1927 Ford Model T,
     a 1935 Chrysler Airflow owned by Steve McQueen
    the last production 1965 Lincoln Continental
    1983 Shelby Dakota,
    1987 Shelby CSX,
    1987 Shelby Lancer
    1989 Shelby CSX VNT
    Dodge Charger GSLH,
    the 1982 Dodge Shelby Charger Prototype
    1987 DeTomaso Pantera,
    two Shelby Cobras
    1966 convertible GT 350 continuation
    1968 Shelby GT 350
    a 1969 Shelby GT 500 that he acquired from Jackie Cooper Jr.,
    chassis 0001 of the 1999 Shelby 1 Series,
    2008 Shelby GT500KR,
    and a 2011 Shelby Cobra CSX 8027 that was his personal example of his CSX 8000-series of modern Cobras.
    2011 Shelby Super Snake
    Oldsmobile Aurora race car

    https://www.bonhams.com/press_release/25807/
    http://www.thedrive.com/news/19973/carroll-shelbys-private-collection-of-automobiles-heads-to-auction

    photos from https://www.hemmings.com/blog/2018/04/11/selections-from-carroll-shelbys-personal-car-collection-head-to-auction-in-greenwich/

    The Italian Job party bus

    inside, it has a Mini bar

    http://carmechanicfails.tumblr.com/

    DYNAMIC DESIGN HOME CINEMA

    DYNAMIC DESIGN HOME CINEMA

    For furniture, I love the few pieces I have and does not change, but as a blogger we discover daily news, it’s hard not to crack …

    Above the living-dining room where Jo Yana chose to paint the main wall in pink – small nod to her favorite designer Karim Rashid … You’ll also notice the suspension ATOMIUM in Kundalini the most beautiful effect!

    This room also houses the home theater installation conducted by Dynamic Home Cinema. In front of these gorgeous wooden drops are pregnant Y21.2 Audio Linear …

    At the entrance, a picture of Miles Aldridge sets the tone of the apartment, and FIDELIO Philips broadcasts Playlist place … On the side of the dining room, chairs LOUIS GHOST EROS and greet guests.

    The main hall lit by the luminaire BLOB M Karim Rashid …

    The cuisine is inspired by Parisian apartment signed Périchon we mention above, because the walls and ceiling were painted in gray have to emphasize the white lacquered furniture. Yellow light under the bar and a nice bin Brabantia bring the strand of color …

    We love the headboard PARROT signed by photographer Solve Sundsbo …

    The workspace of blogger … A reading area with ottoman LEBLON DELIENNE-QUAD and library. An office signed K-DESIGN, and the now famous chair VERTEX signed Karim Rashid.

    DYNAMIC DESIGN HOME CINEMA

    DYNAMIC DESIGN HOME CINEMA

    Berberine – for Cancer Prevention, Anxiety, Depression, Increased Fat Burning, and More!

    Berberine – for Cancer Prevention, Anxiety, Depression, Increased fat burning, and more!

    Berberine is a yellow alkaloid found in several plants/herbs such as goldenseal and phellodendron.   It is a powerful plant chemical with proven antibacterial, anti-inflammatory, anti-diabetic, anti-cancer, and immune enhancing properties.    Herbs containing berberine have a long history of effective use and there is considerable science backing these uses.
    It is also extremely helpful for treatment of seasonal allergies traveler’s diarrhea, food poisoning, and as an oral hypoglycemic for Type 2 diabetes.

    As per Dr. Michael Murray Berberine has been shown to: 
    • Produce results in clinical trials in improving Type 2 diabetes on par or better than conventional drugs including metformin.
    • Improve blood lipid levels better than statins.
    • Lower blood pressure in many subjects as well as any class of antihypertensive medication.
    • Improve liver function and promote anti-obesity effects.
    • Exert significant beneficial effects on digestive health and the microbiome.
    • Produce very encouraging experimental data in a wide range of modern health issues including cancer, Alzheimer’s disease, Parkinson’s disease and others.
    How does Berberine work?

    Berberine activates adenosine monophosphate-activated protein kinase (AMPK).  AMPK is sometimes referred to as a “metabolic master switch” because it plays an important role in regulating metabolism.

    AMPK causes a cascade of effects within cells involved with maintaining energy homeostasis.  AMPK helps shift energy towards cellular repair and maintenance.   It has many of the same effects as increasing exercise while at the same time restricting caloric intake.

    Other benefits of Berberine include:
    • Slowing the release of free fatty acids to help prevent harmful fat deposits
    • Promoting insulin, leptin, and adiponectin function for a healthy metabolism
    • Supporting healthy blood sugar levels already in the normal range
    • Promoting healthy insulin sensitivity
    • Promoting healthy gut microflora
    • Supporting healthy lipid metabolism
    • Stimulating the release of nitric oxide for healthy blood flow
    Berberine Helps Ease Anxiety and Depression

    Another benefit of AMPK is that it protects neurons and increases key neurotransmitters which improves brain function and psychological well-being.  So, it should not be surprising that several studies have shown that Berberine is very useful for anxiety and depression.

    Berberine and Cancer Prevention

    Berberine slows cancer growth and causes cancer cell death through a variety of mechanisms: tumor cell apoptosis and cell cycle arrest, inhibits blood vessel growth to tumors, inhibition of tumor cellular invasion and metastases (spread), etc.
    One of the main anti-cancer targets that is inhibited by berberine is NF-kappa B. NF-kappa B is one of the most important proteins in our cells, acting as a key switch in the development and progression of inflammation and cancer.
    ·       Cancer (and precancerous cells) often have a permanently activated NF-kappa B, which keeps the cells proliferating and prevents them from dying (apoptosis.)
    ·       Chronic inflammation can also be a result of activated NF-kappa B, and we know that chronic inflammation can lead to cancer growth
    ·       Additionally, Berberine sensitizes cancer cells to the effects of radiation but NOT of normal cells. So Berberine may make radiation therapy more effective. 

    Berberine also inhibits the tendency of cancer cells to become drug resistant over time by inhibiting the cellular membrane proteins that pump drugs out of the cell. When Berberine is taken with numerous chemotherapy drugs, studies have shown that they work synergistically to fight cancer.
    Contraindications for Berberine

    ·       Displaces bilirubin and should not be administered to jaundiced neonates (may increase bilirubin levels due to displacement of bilirubin from albumin)
    ·       May cause a prolonged QT (a variable in cardiac electrical conduction) in patients with underlying heart disease
    Drug Interactions

    While Berberine is quite safe and well-tolerated, it may be contraindicated if you’re taking medications.  For example, Berberine may hinder absorption of tetracycline and other similar antibiotics, rendering them ineffective. Also, because Berberine significantly inhibits CYP3A enzymes — enzymes needed to metabolize most drugs — it can lower the clearance of medications, which in turn can augment their effect. This can lead to overdose, the risks of which will vary depending on the drug in question.

    Berberine increases the effects of drugs that lower blood sugar so it is critical that you not mix Berberine with these drugs unless under the supervision of a physician.  IT is important to note that Berberine produces all the benefits of Metformin with much lower risks!

    Sources of Berberine

    Berberine is available as an isolated supplement OR through certain herbs such as goldenseal or Phellodendron.    Nexrutine is a patented Phellodendron Extract with high levels of Berberine that is particularly effective at reducing joint pain, improving mood, and reducing prostate inflammation and likely prostate cancer risk.   Phellodendron also has has a long history of being used to treat prostate inflammation and prostatitis.

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

    Matryoshka House was designed by architect David Jameson, is located in Bethesda, Maryland, USA. Obeyng unwritten rules concept Matryoshka, the house consists of a series of volumes is one inside the other. According to ‘description’, architects, in essence, a meditation room with suspended center acts as the physical and spiritual for the project. The internal energy market of the meditation room locked in an open, bright. Alternating tread stairs rise participant commits deliberatley eve of the meditation room. The meditation room is surrounded by a wooden container that surrounds the living area of ​​the house. Traditional decorations in turn should have soothed by stucco walls act as a protective layer and ground floor of the house. In-between space of nested volumes strategic cup sun to protect lines of light inside.

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY DINING ROOM

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL MEDITATION ROOM

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL MEDITATION ROOM

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY BATHROOM

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY BATHROOM

    How to Quickly and Effectively Eradicate Lice

    HOW TO QUICKLY AND EFFECTIVELY ERADICATE LICE

    How to Quickly and Effectively Eradicate LiceLice again, lice again. The tiny little black one is indeed often makes us upset, because it can cause intense itching, especially when the scalp sweating and exposure to sunlight. The itching due to lice bite the scalp resulting taste very itchy. Lice is very disturbing appearance of first onset of egg nits on the hair shaft can affect your confidence.
    Are you looking for a solution to eliminate head lice? If yes maybe the following article can provide a solution that can help you in eliminating fleas. Some tips we can give them is:
    How to Quickly and Effectively Eradicate Lice - 1
    1. Use Shallots
    In addition to be used as a spice in the kitchen also turns onion can eliminate lice nits at the same time naturally. How to complete the following steps: take a few suing onion, peel and puree until smooth. After that, apply on the hair and scalp evenly. Then let stand for a few minutes until absorbed. Last wash with shampoo and water until clean. This method is a recipe handed down from ancestors.
    2. Use Soursop Leaf
    Soursop leaf does have properties that are good for health as it can be to treat cysts, soursop leaves is also able to eliminate lice in the hair.
    The trick is as follows: take a few leaves of the soursop, then rinse thoroughly. After that, growing until smooth and give a little water while stirring. Next, apply the mixture on the skin and hair evenly. Then cover with shower and a cup overnight. Last wash with water and shampoo to clean.
    3. Use Lime & White Wood Oil
    The combination of these two materials was able to eliminate the eggs and lice.
    The trick is as follows: prepare lemon, squeeze and take the water. After that, mix it smooth with eucalyptus oil and lemon juice with the same comparison. Next, apply on the skin and hair evenly with a gentle massage and light. Then cover with shower cup or towel and let stand for 3 hours. Finally rinse with shampoo and water used to clean.
    4. Use Coconut Oil
    Besides being able to get rid of lice, coconut oil can also eliminate dandruff as well.
    The trick is as follows: Squirt a few drops of oil on the hair and skin evenly. Thereafter, a massage lightly and cover with shower cup or a dry towel. Then let stand for overnight and the next morning rinse with water and shampoo. Coconut oil will keep fleas to become dehydrated, so that over time becomes dead lice.
    5. Use White Vinegar
    Despite having less pleasant odor but is a powerful way to remove eggs and lice.
    The trick is as follows: drops of white vinegar on the skin and hair evenly. After that, do massage lightly. Then let stand for 3 hours until absorbed and dead lice. Finally rinse with water and shampoo to clean.

    Hopefully the article How to Quickly and Effectively Eradicate Lice can we share today can be beneficial for you. Do not forget to always visit the website abouthealthbenefits.xyz to seek other health articles. Thank You.

    Getting Started with a Flipped Classroom

    Last week, I shared a bit about why I flipped my classroom, and I got some great questions! Today I want to share a bit more about my process and the logistics for flipping. There are lots of ways to do it, and I’m sure there are many other great ideas out there, but this is what has worked for me so far.

    1. Plan your lessons 

    a) Does it make sense to flip?
    You don’t want to flip for the sake of flipping. I always ask myself, “Would this lesson make sense as a flipped lesson?” There are times when some introductory lessons require lots of hands-on scaffolding, and my answer might be “no.” But other times, when the lesson is mostly information and practice, the flipped model absolutely makes sense.

    b) What content must be covered?
    I go through my math lesson plan, and determine the content that has to be covered in the video. I’m really selective about this because I want my video to be less than 10 minutes long. It’s still a mini-lesson, after all, and if I go any longer than that, my students will tune out. Plus, even though the video may be 10 minutes, the viewing time could be much longer than that if students are pausing the video to write things down or take notes. I try to keep in mind the idea that less is more.

    c) Am I the best person to deliver the content?
    Usually my answer is “yes,” but not always. I’ve tried to share videos from Khan Academy or LearnZillion in the flipped model, and the kids just didn’t respond as well to those. They’re more likely to tune in when the video is made by their teacher because they have a personal connection. There were a few times when I’ve used someone else’s videos because the production was significantly better in some regard (e.g., it included songs or humor that I couldn’t pull off). But usually, I make the videos myself.

    2. Choose your tools

    Once I know the content of my lesson, I decide what method I’ll use to produce the video. I choose from a few different options.

    a) Screencasts
    Sometimes I have a presentation already created in a flipchart for my ActivBoard, and I can just film my voice interacting with my computer screen on that. My favorite tool for screencasting is Screencast-o-matic. It’s very user-friendly and it uses a yellow circle to highlight your mouse so students know where to focus their attention. The free version works well, but for $15/year, you can get lots more editing and uploading options. If you’re interested in screencasting, I would recommend trying out the free version for a while to see if it’s something you’d like.

    b) Whiteboard apps
    Usually I use whiteboard apps such as Explain Everything or Educreations to make my flipped lessons. I always create the slides in advance so that I don’t waste precious recording time writing out problems or building models that could simply be explained. Then once all of the slides are in place, I’ll record the audio over them. This approach also allows me to work in pieces, too, because I never know when I’m going to get interrupted.

    c) Paper slide shows
    I’ve blogged about paper slide shows before here. Sometimes the lessons are a bit more hands-on (e.g., using a protractor), and I want to show students some examples. In those instances, I use my DEWEY Document Camera Stand ($120, www.copernicused.com) that turns my iPad into a document camera, and I work and film underneath it. I mostly use this approach with Geometry and Measurement standards, but when I need to do a lot of physical manipulations, the paper slide show works well.

    3. Choose your platform

    Once I’ve made the video, I need to upload it to a platform for students to view. YouTube is blocked for students at my school, so I use Vimeo instead. I ended up buying a Vimeo Plus subscription last year ($59.95/year or $9.95/month). That gave me much more space for uploads each week (5 GB vs. 500 MB with the free version), and it sped up my upload times, so it was worth it to me when I was crunched to get the videos uploaded after school. I created a channel for some of my videos, and now I’m going back to re-make some or better tag/organize the videos for each unit.

    4. Share your content

    Once the videos are uploaded on Vimeo, I needed a way to share the links to the videos. When I started, I was posting the links after school each day, but I eventually cut out that step. Now I make one Google Document each term with all of the dates and lesson topics, and then I just copy and paste the links into that document as they’re done. That helps my students because they find the video links in one spot, and I can post the links as they’re available. Here’s an example of what that document looked like one term.

    Bonus Tips

    1. Make your videos in batches. 
    I found it much easier to make all of my videos for the week at once. I could usually tackle this in a couple of hours each week, and it was much less stressful than trying to film every day. I was able to find my rhythm with the process when I batch-produced videos, so that’s how I try to work now. 
    2. Start small.
    Even if you only make one video each week, you’re still starting to build a library of flipped lessons for future use. I didn’t make as many videos as I’d wanted to last year, but I’m grateful for the ones I already have done because that’s less work I’ll have to do this year.
    3. Divide and conquer.
    See if someone else on your grade level team would be interested in flipping with you, and then divide up the lessons. Even if you’re not the one teaching the lesson in every video, the students will appreciate it being someone they know. 
    4. Get some cheap .mp3 players for student check-out.
    Most of my students had Internet access at home to watch the videos, but a couple didn’t. I wrote a grant to buy 10 inexpensive .mp3 players that students could check out to watch the videos. They didn’t require an Internet connection because I saved the videos straight to the hard drives, and since they were cheap .mp3 players (<$20 each), they didn’t have any bells and whistles to make them targets for theft. It was a workable solution for those students who lacked technology access at home. 
    Next week, I’ll share more about what my math block looks like under the flipped model. Until then, I’d love to hear from you. What are some tools you use for video production in your class? What challenges do you foresee with a flipped model? Share your thoughts in the comments section.

    Intermittent Fasting for Health and Fat Loss

    Done properly fasting can be very beneficial for improving health and accelerating fat loss.   There are many different types of fasts, but the most popular and practical is called intermittent fasting.
    Intermittent fasting gives your body more time to effectively digest what you are eating and eliminate waste. 
    You can get most of, if not all, the same benefits of fasting, with intermittent fasting. Intermittent fasting involves reducing your food intake in whole or in part, either a few days a week, every other day or daily.  The most popular way to do intermittent fasting is to restrict your daily food intake to a specific window of time – typically a six to eight-hour timeframe each day.
    For example, if you skip breakfast and make lunch the first meal of your day, you might restrict your food intake to the hours of 11:00 a.m. and 7:00 p.m. If you are a breakfast lover, your window could be between 8:00 a.m. and 4:00 p.m.  The key is to eat only two meals, and to ensure you eat the last meal at least three hours before bedtime. When you eat three or more meals a day, you rarely, if ever, empty your glycogen stores (storage form of glucose – mostly in your liver), mainly because it takes about eight to 12 hours to burn the sugar stored in your body as glycogen.
    By fasting about 14 to 16 hours a day, you give your body enough time to drain your glycogen stores and shift into fat-burning mode. This pushes your body to use fat as a fuel.  Because fat is a slow-burning fuel, you will not only have a more balanced energy supply, but you will also avoid the typical sugar “highs” and “lows” that come with typical diets.
    While you will undoubtedly feel hungry on occasion, that is perfectly normal. Once your body adjusts, you may be surprised to discover how much less food you will consume to feel completely satisfied. In many cases your food cravings literally disappear once you have regained your ability to burn fat for fuel.
    Benefits of Intermittent Fasting
    Intermittent fasting provides a number of health benefits including:
    • Forces the body to become efficient at burning fat as the primary fuel which helps eliminate sugar cravings
    • Increases growth hormone to help build muscle and promote overall health and wellness
    • Enhances brain health and helps prevent neurological disorders like Alzheimer’s
    • Reduces oxidative stress and fights aging and diseases like cancer
    • Lowers triglycerides and reduces inflammation
    • Dramatically boosts brain derived neurotrophic factor (BDNF) which activates brain stem cells to convert into new neurons.
    • Dramatically increases the process of Autophagy
    Benefits of Autophagy

    Autophagy means “self-eating” and refers to processes that your body uses to clean out various debris and detoxify while also recycling damaged cell components.   It is quite literally like your body’s recycling program.   It improves metabolic efficiency, gets rid of faulty parts, and stops cancerous growths.   It also helps to dramatically decrease inflammation throughout the body.

    During the bio-energetic challenge of exercising or fasting, autophagy is increased.   This stimulates stem-cells including muscle stem cells which can help prevent sarcopenia (muscle loss with aging).     So, intermittent fasting can help maintain the regenerative capacity of muscle stem cells.

    There are three ways to boost autophagy:   exercise, fasting, and nutritional ketosis. 

    Who Can Benefit from Intermittent Fasting

    Intermittent fasting can benefit just about everyone, but athletes may benefit even more. A 2016 study that tracked the effects of intermittent fasting on 34 resistance-trained men found that restricting their eating to an eight-hour window positively affected several health-related biomarkers, while decreasing fat mass and maintaining muscle mass.

    While additional studies need to be completed to further investigate the effects of intermittent fasting on athletes, it seems that intermittent fasting could be used during maintenance phases of training when the goal is to maintain muscle mass while reducing fat mass.
    The Importance of Proper Food Choices during Intermittent Fasting

    During intermittent fasting and reduced food intake, your food choices are very important. Since you’ll be eating less, it’s vitally important that you get proper nutrition from your food. Healthy fats are essential because intermittent fasting pushes your body to switch over to fat-burning. Particularly if you begin to feel tired and sluggish, it may be a sign that you need to increase the amount of healthy fat in your diet.
    Cutting net carbs (total carbs minus fiber) is equally important. Focus on:
    • High quality fat intake in the form of avocados, coconut oil, organic grass-fed butter, organic egg yolks and nuts.
    • Moderate amounts of high-quality protein from organically raised, grass-fed or pastured animals, which translates to no more than 40 to 80 grams of protein per day
    • High amounts of fresh, low-net-carb vegetables, ideally organic
    Contraindications for Fasting

    Although most people can safely benefit from intermittent fasting, it’s important to take caution if you have certain health challenges. Do NOT use fasting unless approved by your physician if any of the following are true:

    • You are underweight with a body mass index (BMI) of 18.5 or less
    • You are malnourished
    • Children should NOT fast! They need nutrients for continued growth; if your child is obese, consider cutting him or her back on refined grains and sugar to promote weight loss
    • Pregnant and breastfeeding women should NOT fast because a consistent flow of nutrients must be shared continually with the baby to ensure its well-being
    • If you take medications that should be taken with food you will need to be very cautious about fasting and consult with your physician first.   This is especially true for diabetics and those with gout.

    The weight question

    ‘Those desiring to lose weight should perform hard work before food. They should take their meals after exertion and while still panting from fatigue … They should, moreover, eat only once a day and take no baths and sleep on a hard bed and walk naked as long as possible.’

    Theories on the weight-loss benefits of walking around naked and not bathing have not been proven, but Hippocrates’ other dietary advice isn’t completely off the wall and shows that even 2,400 years ago, the relationship between food intake and energy expenditure was recognized.

    Diet Start

    Today ‘obesity’ is becoming universally recognized as a disease in its own right. Obese and overweight are terms that are often used interchangeably, but let’s clarify the difference between them:

    ¨ Overweight refers to an excess of body weight and includes all tissues, such as fat, bone and muscle, but not just excess body fat.

    ¨ Obese means that someone is carrying an excessively high proportion of body fat that could compromise their health.

    If you are an athlete or body-builder, you may weigh more than the desirable weight range for your height, but this is normal because muscle weighs more than fat. Equally, you may be a relatively sedentary person who weighs in at the correct weight for your height, but who still carries too high a proportion of body fat. In this case, a good exercise programme is vital.

    For those of you who feel that you are more ‘lard’ than ‘hard’, and don’t like what you are seeing on the scales, a better way of calculating just how overweight you are is by working out your Body Mass Index (BMI).

    You can tell if you have surplus body fat simply by seeing if you can pinch more than 2.5cm (1 in) on your hips, tummy, underarms and back.

    Alternatively, get your doctor or gym instructor to check out your BMI using callipers, or buy a set yourself from your local pharmacy. If you have more than 25 per cent body fat, then the chances are that you are carrying too much weight, or at the very least need to change your diet and participate in exercise that will burn fat and build muscle.

    Successful weight loss and healthy weight management depend on sensible goals and expectations – losing just 5-10 per cent of your weight is the kind of goal that can help improve your health.

    You may be wondering how you have got this far without hearing about calories. But you don’t need to become obsessed with the calorific value of everything you put in your mouth. Instead, it is much better to check food labels to see if the food contains unnecessary additives, sugar, hydrogenated fats and salt – and, of course, how high the carbohydrate content is.

    Quick Tip: The Sims 3 – Game Recording Is Slightly Darker Than The ‘Normal’ Colours Of Regular Gameplay [FIX]

    Just a Quick Tip for those of you recording The Sims 3 and finding that your videos are looking ‘darker’ than the original gameplay itself – a problem that has been around for some people for over a year now… It’s not that the game isn’t recordable (although for some people they got nothing but ‘blank/black screens’ a few years ago) it’s that the recordings are coming out, what looks like, a few shades darker than what the game really is.
    I was recently seeing a spike in the number of people talking about this problem again and decided to see if I could find a fix, or at least a workaround, for it; and what I found was something that everyone can do for now (at least until AMD/NVIDIA or Maxis/EA makes an update that fully fixes the issue) and that is simply: to run The Sims 3 in Windowed Mode.

    Whether you are using Dxtory, Bandicam, Afterburner or most other game recording programs (even NVIDIA’s Shadowplay has the same issue for some people), the fix [more of a workaround] that I found for now at least allows you to record your Sims 3 gameplay with proper colours, as you can see in these frames extracted from a couple of game recordings, below:

    Comparison between the display modes and the colours when recording (Darker vs. ‘Normal’) for the recording issue with The Sims 3, showing that the workaround works [at least for now] in two extracted frames from two game recordings (one in Windowed Mode and one in Fullscreen Mode). [In the right half, the camera has been ‘zoomed in’]

    Have fun recording your Sims 3 gameplay once again, if this problem has made you stop – and
    See You In The Games!

    The Incredible Benefits of Grounding – Walking Barefoot on the Ground!

    Anyone with small children knows they want to try to ditch their shoes every chance they get – but if you think about how you feel when you are barefoot you will probably realize that you  also feel better when you can walk around barefoot.  Researchers have begun to unravel why being barefoot directly on the ground can in fact be very good for your health!
    Your immune system functions well when your body has an adequate supply of electrons, which are easily and naturally obtained by barefoot contact with the Earth.
    Research has shown that electrons from the ground have measurable antioxidant effects that can protect your body from inflammation. For hundreds of thousands of years on the planet humans have been in direct contact with the ground without anything that would block the flow of electrons into our bodies.
    However in modern time’s pavement, wood, rubber, plastics and many other forms of non-conductive material are between our feet and ground blocking the natural flow of electrons.
    The surface of our planet has a negative electrical potential. So when we are in direct contact with it electrons flow to your bod through a process called “grounding”.   Grounding causes positive physiological effects that promote optimum health.
    Specific researched benefits include improvements in blood viscosity, heart rate variability, inflammation, cortisol dynamics, sleep, autonomic nervous system (ANS) balance, and reduced effects of stress.
    When you connect directly to the ground without any non-conducting material between you and the electron field of the planet there is an improvement in the balance of two sides of your autonomic nervous system:  the sympathetic and parasympathetic nervous systems.
    How Shoes May be Impacting Your Health
    Materials like metals are excellent conductors of electricity (aka electrons!). The human body is also conductive because it contains a large number of charged ions (called electrolytes) dissolved in water.
    Other non-conductive materials, such as plastic and rubber, have very few free or mobile electrons. Traditionally shoes were made of leather, which is a good electrical conductor. However almost all modern shoes contain rubber and plastic which block the flow of electrons from the earth to your body.
    The Health Benefits of Grounding
    Your immune system body has evolved a method of destroying bacteria and viruses by generating reactive oxygen species (ROS) that are delivered by immune cells. However, these ROS can also cause extensive damage to healthy tissues. ROS are usually positively charged molecules that need to be neutralized immediately to prevent damage to the body after destroying bacteria or viruses.   This is one of the key functions of anti-oxidants which are most important in immune cells to protect them from the ROS they generate!
    Anti-oxidants essentially provide a supply of negative charges. Food based antioxidants (such as Vitamins C and E) and anti-oxidants your body produces are critical but a regular supply of electrons grounding can supply them as well.
    Evolution facilitated the process of grounding by providing conductive systems within your body that deliver electrons from your feet to all parts of your body. This system has been integral to human physiology for thousands of years. Negative electrons are always available, thanks to the Earth, to prevent the inflammatory process from damaging healthy tissues.
    All of this was interrupted when we started to wear shoes with rubber and plastic soles, and no longer slept in direct contact with the ground. Several experiments have proven that a person who is grounded is less stressed and more relaxed.
    So have some fun, kick your shoes off and get back to nature!
    How to get the benefits of Grounding
    Grounding is simple in warmer climates – simply spend time barefoot in direct contact with the earth.   Even better do this on a beach walking along the edge of the water because the flow of negatively charged electrons will be highest here because sea water is an ideal conductor of electrons!    Any amount of time will help but the more you can do it the better!  Even better spend some time laying on the beach or ground with your body in direct contact with the ground without any artificial fabrics, rubber or plastic between your skin and the ground.
    For those of us who do not live in warm climates staying grounded during colder months is a bit more challenging but doable! There are actually grounding mats available that plug in to the grounding wire port of a normal 3-prong outlet or a grounding rod (US and Canada only). The earth’s natural electrons flow right up through the ground wire and onto the mat, even if you’re in a high rise. Most mats come with an outlet tester you plug in to the outlet so if your outlet is configured properly.

    My Trip to Batticaloa

    This assignment required me to travel to Batticaloa which is in the eastern coast of Sri Lanka. The drive to Batticaloa is long (About 320 KM) but the killer is that it takes nearly 8 hours to get there. I left at 6.15 AM from Colombo and arrived at 2.15 PM in Batticaloa; stopping only for Breakfast and a cup of tea.

    The assignment was 10 day evaluation of the management capacity of an organization who was delivering services to the people of the eastern province. The unique aspect of this assignment was that the client wanted to evaluate very specific aspects of its organization management structure, financial management, HR management, monitoring and communication systems. Therefore I had to customize the tools we used to a very high degree to ensure that the tools we used were compatible with the specific need. It also meant that this level of customization was a green field (Not done before so don’t know the pitfalls) this was further complicated by the fact that the execution of the assignment had to have a tri-linguistic person to facilitate the field work as well as translate at the synthesis workshop.

    The assignment went in a smooth manner and it was well received by the employees of the organization. Generally management capacity evaluations can get tricky as some managers take it as a personal weakness and get very defensive.

    I was surprised at the weather in Batticaloa and the amount of water on the ground. The roads that went through the lagoon were nearly inundated. Some of the shorter routs to Batticaloa were flooded so I had to travel via Polonnaruwa. In terms of the post war development in the east; I must say that all the reports regarding infrastructure development are correct and perhaps under reported. Road, bridge and utility projects are still going on and the whole of the eastern province looks like one giant construction site.

    The fishing industry is booming in Batticaloa and the seafood prices are less than half of what it is in Colombo. So the team had seafood at every opportunity. The tourism industry has a demand but the number of rooms available seemed to be inadequate for the demand. There is a dire need for quality hotel rooms in Batticaloa. The availability of jobs would be the main social issue in the coming months as the construction industry starts to finish the construction projects.

    I have to travel to Wadduwa (from Batticaloa) to attend the 6th South Asian Regional Workshop on Resource Mobilization which starts today; so will be on the road for the rest of the day.

    HOME DECORATING WITH ASIAN STYLE

    Asian themes uses bright and vibrant colors, and thus, it might not always be a good idea to do up the whole house using this theme. It is always better to concentrate on some part of the house and use it as the focal point by decorating it using the Asian theme. There is heavy dependence on texture and color in this theme, and this needs to be kept in mind.

    Home Decorating With An Asian ThemeHome Decorating With An Asian Theme


    Home Decorating Room With An Asian ThemeHome Decorating Room With An Asian Theme


    Home Decorating With An Asian Theme Bed RoomHome Decorating With An Asian Theme Bed Room

    One of the best places to decorate using the Asian theme is the dining room of the house. When the dining room is decorated, one obviously can use the vibrant colors but besides one can also add decorative pieces on the table. One can use things made of bamboo or Chinese utensils which are very famous in the Asian area.

    fantastic paintjob on this speedboat

    http://darkdraggon.tumblr.com/page/3

    The Benefits of Jump Training

    Watch a group of kids and you will likely see bobbing heads – kids love to jump and there are good reasons for them to jump.   A key aspect of human movement is learning to store energy and then reclaim it as part of a movement cycle. For example up to 40% of the energy required for movement during walking and running is created by storing energy in the leg muscles as the foot lands and then using it during the push-off phase.  The technical name for this cycle is the “Stretch-Shortening Cycle” or SSC.  The SSC takes advantage of the fact that muscles can act as springs:  they store energy as they are lengthened then rebounding in the opposite direction as they get shorter.

    Efficient movement takes advantage of the stretch-shortening cycle and muscles are designed to store and release energy in a rhythmic pattern of loading and unloading just like loading and unloading a spring.  In addition, power for all athletic movements is generated by taking advantage of the SSC.     A key aspect of getting the most from this cycle is rhythm and timing which are learned through repetition.
      
    There are three distinct phases to jump training:

    The Loading Phase – such as landing phase of walking and running where the muscles lengthen under tension to absorb the landing.
    The Amortization Phase – where the muscle transitions between loading phase and the Unloading phase.
    The Unloading Phase – where the muscles shortens and transfers the stored energy externally like a spring recoiling such as the push-off phase of walking and running.

    Jumps can be little – like jumping rope or big – like box jumps.  Start with little jumps.  A great place to start is jumping rhythmically in place with both feet with short fast jumps.   You want to land on the ball of the foot and flex your knees when you land and let your heels just kiss the floor then jump up again and repeat.  Start with really tiny jumps and try to let the elasticity of your calf and quad muscles do the work – done properly it should feel relatively easy.   It will take several weeks to condition the muscles of the foot and calf to be able to do longer sets so take your time.  In addition there are many benefits to performing this training without shoes so the muscles of your foot get conditioned and you have a better feel of the ground.

    It is also important to insure your knees track over your toes and do not collapse inward so do short sets (30 seconds or less) of low, fast jumps on both feet and learn to feel the rhythm of the cycle of landing and push off.

    Once you master this you can add more height to your jumps after you are warmed up.   Stop each set if you start feeling tired or feel unstable, and recover completely between sets.  Do NOT do jump sets to failure. Eventually you can progress into full squat jumps.   However remember the key to capturing the benefit of the stretch-shortening cycle is a quick rebound after landing.  So if you go too low in the loading phase the pause between landing and rebounding will be too long and you lose the benefit of the stretch-shortening cycle.

    Over time you can even progress to single leg jumps or box jumps where you jump down off a height to the ground/floor then land and rebound up.  Take these progressions SLOWLY – it is important to build the elastic strength of the muscles in your foot, lower leg, and thighs over time and stopping BEFORE you are exhausted will prevent injury.  This is why kids naturally like to do short sets of jumps repeatedly – it feels good when done properly!

    There are many benefits to jump training including:

    Toning the lower body – jumping recruits all of the major muscles of the lower body while at the same time being the ideal stimulus to build bone strength.

    Jumping burns lots of calories – once you can build up to being able to do 1 – 4 minutes of continuous jumping like jumping rope you can really rack up the calories!

    Jumping pumps up the cardiovascular system – as above once you can jump safely and in good form for 1 – 3 minute sets you will not believe how high your heart rate gets!

    Jumping also demands great balance and stimulates fast-twitch muscle fibers.   Fast-twitch muscle is the type of muscle we lose quickest as we get older.   Fast-twitch fibers are not just important for athletes – they are important for preventing falls because the ability to produce force quickly is important to be able to react quickly when your balance is unexpectedly challenged like stepping off a curb you do not see!

    Jumping is the best way to build the strength of bones – bones need impact and force to stay strong. The key is starting with small jumps and gradually building the height of jumps and time spent jumping.

    There are many ways to build jumping into a workout such as doing some skipping drills which can even be done on a treadmill safely once you get the hang of it.


    It is also worth working with a trainer to help you develop proper jumping mechanics and the stability you need to land properly which are pre-requisites for safe and effective jump training.

    BEAUTIFUL INTERIORS STYLE FROM SHH

    SHH is a London-based company, founded in 1992. Interior design is not their only strong point that the company also makes architectural projects. But now we want to show you how a room can be transformed into an elegant and modern in their vision.

    BEAUTIFUL INTERIORS FROM SHH

    BEAUTIFUL INTERIORS FROM SHH

    We collected up to 15 different interiors that stand out and can become a real source of inspiration. We deal in the living room, bedroom or the hallway of boredom and failed surprising elements are added to create comfortable spaces. White is airy and gives a sense of calm, while the funky food the best and rebels. Color and light is present in some unusual arrangements with excellent results.

    BEAUTIFUL INTERIORS FROM SHH

    BEAUTIFUL INTERIORS FROM SHH

    BEAUTIFUL INTERIORS FROM SHH

    BEAUTIFUL INTERIORS FROM SHH

    BEAUTIFUL INTERIORS STYLE FROM SHH

    BEAUTIFUL INTERIORS STYLE FROM SHH

    BEAUTIFUL INTERIORS DESIGN FROM SHH

    BEAUTIFUL INTERIORS DESIGN FROM SHH

    Quality Test – H.264/AVC Game Recording with the x264 AVC Codec, with the goal of Quality (with “2K” HD Video Samples from Four Games)

    In an earlier post about game recording with H.264/AVC (MPEG-4 Part 10) here, I went somewhat in-depth about concepts and considerations for the various settings and why you might want to use them or leave them as they are. With plans to make a “short version” of why you might want to use some settings over others (and setting recommendations geared more towards Speed of recording, reducing lag/choppiness) in the near future, for now, enjoy this short sampling of some game recordings done with H.264/AVC – this time with the goal of increased Quality in mind as well – showcased using four different games and presented in 2K Resolution (2048x1152p):

    Clicking the Gear icon in YouTube’s player and choosing ‘Original’/1440p, while still Youtube-recompressed, is the closest to the original upload in viewing quality (You may need to click on the YT logo and watch it at YT to enable the Quality Setting)

    Recorded games:

    Battlefield 3 (Grand Bazaar), Planetside 2 (48+ Players Per Side in a BioLab territory, Night), Hitman: Absolution (‘Run For Your Life, Shangri-La’), Grand Theft Auto 4 (Broker area, Night)

    These games were selected because I felt they created a good ‘obstacle course’ for this codec Test, with light and dark areas, large panning/movement areas and hard edges to deal with, either from on-screen text or finely detailed textures [all Texture Filtering was turned Off in the Videocard Control Panel settings] (they were also all relatively demanding games, showing then, the low performance hit of this codec, with these settings)

    Recording codec:

    H.264/AVC configured with the x264 Video For Windows Unofficial (Black Logo) interface (the XiWave GNU GPL MPEG-4 Codec)

    Recording settings:

    CRF18, NoPartitions, Fast P-Skip, 1 Reference Frame, Diamond ME, ME Range 4, Subpixel ME 1, GOP 1 (for editing with Vegas/Premiere), NoWeightedP-Frames, No B Frames, Deblocking Filter (Strength 1), Non-Interlaced, No CABAC, DCT Decimation, No Trellis, Deadzone (11,21), Flat Matrix, MaxBitrate 50000k (Buffer 5000k), Threads 4, all other settings left as Default/Off

    Recording compression:

    Originally recorded @ 50000kbps, H.264/AVC format @ HD Resolution (1920x1080p)
    Compressed @ 25000kbps for smaller upload to YouTube, WMV format @ 2k Resolution (2048x1152p), in attempt to keep detail/compensate for YT recompression

    [The ‘analog pause’ effect wasn’t added to accentuate any specific action going on at the time, it was more to showcase the detail maintained at that time/frame, when recording with the h.264/AVC codec] 

    At a max bitrate of 50000k (a high quality Blu-Ray movie bitrate), the original recorded output takes up about 375MB per minute of recording. For an hour of gameplay, that’s less than 25GB (including uncompressed audio (uncompressed to be more compatible with video editing apps and use less CPU resources while recording)). Maintaining good quality – although quality is relative, mind you – that is still about one-tenth the filesize of a FRAPS1 codec recording or a YUV or Lagarith codec recording. Chalk it all up to a powerful codec that has the ability to not only compress more where it can (without over-compression in dark/flat or low-motion areas), but also compensates for its’ own compression via Deblocking and other built-in techniques.
    Doing a quick test without the self-compensation capabilities found within the codec (turning off Deblocking, CABAC, etc), the output has macroblocking and other artifacts occurring, as can be seen in this screenshot:

    An example of the internal filtering/compression-compensation found within the h.264/AVC codec, two frames taken directly from two h264/avc recordings, done one after another in the same area in the same online game
    (Rift, recorded @ 1080p).
    Click to see Full Size (cropped and zoomed source)

    The two frames above are from videos shot close together in time, at the same bitrate, resolution, everything… The only difference between the two is that the left side has all filtering/compensation for compression that the codec can perform ‘OFF’ and the right side has CABAC, Deblocking and other compression/correction techniques ‘ON’ (Deblocking within the codec was set at only +2+0, as higher Deblocking settings have the effect of excessive smoothing.. [but if you don’t mind that or you like the look of it, you can turn up the Deblocking to a maximum setting of +6+6, with a small hit to recording performance]).

    These powerful compensators for compression come at a tradeoff however, as the more that you turn on, the longer the codec will take to scrutinize the frames and the slower the compression/output will be. This results in ‘lag’ both in the game and in the output video, as the resources of the system are directed more towards analysis and compression of the recording, where doing the calculations on the frames, then writing them to disk, can cause the recording to fall behind what is actually occurring on the screen. Also, turning up too many compensators/filters within the codec can result in a ‘washed-out’ (or at least excessively-smoothed out) video, meaning higher loss of detail.

    So, are you stuck with only either crappy looking video or too-smoothed-out video output? Not at all. There are two main directions you can go with your h264/avc game recording (which one you decide on is limited somewhat by your system capabilities):

    • On the one hand, you can have small filesizes, allowing you to record longer and more video. You can turn up the analysis and compensation techniques within the codec (Deblocking, Motion Estimation, CABAC calculations, Partition Analysis, etc) – as much as your system can handle, but not too much or you risk excessive smoothing, lag and other effects – and still end up with good quality game recordings.
    • On the other hand, you will have larger filesizes, but if your system cannot handle the extra analysis and calculations of the codec, you can turn off these compression/compensation techniques and also gain more speed/performance [less ‘lag’ during gameplay and in the video output – this may also result in more detail being kept from the original source]. All you have to do is allow more Bitrate (setting a lower CQP or lower CRF, if you are using those) to more accurately represent what is occurring on-the-screen/in-the-frames, so that you don’t get compression artifacts (as in the left portion of the screenshot above) – and still end up with good quality game recordings.

    What settings to use, then? I will present the settings I settled on, after much testing; but again, these were done on my system, with the limitations that includes for me. You may have a more powerful or lesser so system, but all it will take is a few tests, changing a few settings each time, to see what kind of quality you can arrive at, with the balance/tradeoff of performance hit you are willing to tolerate.

    Although JPG-compressed for posting, it can still be seen in this frame extracted directly from the H.264/AVC game recording (Hitman: Absolution @ 1080p), that decent quality can be maintained, despite the ability to record in smaller filesizes, with this codec and these suggested settings for the x264 interface.
    Click to see Full size

    There was only a light performance hit for my system with these upcoming settings, usually only a couple frames per second (averaging about 5fps loss, depending on the game/area being played); but it may depend on the ‘overhead space’ that you have running a game already. What I mean is, if a game is already chugging along for you, you may not be able to use or turn many things on with this codec (it can be much more demanding, as the different processing options get turned on). Along that same line of thought however, if you are able to run a game you want to record smoothly already, you should have no problem trying out this codec (esp. with my suggested settings). Since that was the case with many of the games I was playing with at the time [although games like GTAIV are always choppy haha], I will list the basic system specs that were used during the time of this Test:

    AMD FX-6100 CPU @ 4.0GHz
    AMD/ATi Radeon HD 6870 GPU (1GB VRAM) @ 950MHz
    16GB Patriot “Gamer” RAM
    all on a Gigabyte 990FXA Chipset Mainboard
    running Windows7 64-bit
    recording to two SATA III harddrives set up in RAID 0 (~233MB/s throughput, according to Dxtory)

    I also managed to perform these couple of quick tests, as a comparison of the performance hit to be expected when recording with this codec and these settings on some other systems (CPU/GPU combinations listed):

    Unigine Heaven Benchmark
    6-core CPU / HD 6870 GPU ~1-3fps
    4-core CPU / GTX 560 Ti GPU ~3-5fps
    2-core CPU / GTS 250 GPU ~5fps

    Rift (Online MMORPG)
    6-core CPU / HD 6870 GPU ~1-3fps
    4-core CPU / GTX 560 Ti GPU ~ 5fps
    2-core CPU / GTS 250 GPU ~5fps

    Not bad, in my opinion. These settings seem to work well, no matter what combination of hardware there was. Hopefully this will be the same for you, dear reader.

    So then, just below are the settings I normally use when recording with the H.264/AVC codec. I might change things a bit for certain games that look vastly different, such as, if I wanted to keep the grain in the Left4Dead series of games or if I was recording a solid-coloured/static-area looking game like Minecraft or Web Browser games. For the most part however I use these settings, both for maintaining good quality and keeping disk space usage relatively low (at least, far lower than using the FRAPS1 codec, Lagarith, or a YUV codec).

    [Note that I have chosen to use a GOP (Group of Pictures (Frames) (called “keyint” in the bottom example)) of “1”. This is for editing compatibility with Vegas/Premiere and is optional if you are not using these video editing applications. Feel free to change the “1” in this setting to the Codec Default of “250”, or as desired. For more information on this, especially if you plan to edit the recordings with Sony’s Vegas or Adobe’s Premiere lines of products, see this post earlier, here]

    When using the ‘Unofficial’ (Black Logo) x264 Video For Windows interface to configure settings:

    When using the ‘Official’ (Red Logo) x264 Video For Windows interface to configure settings:
    For the official/redlogo interface, choosing the Ultrafast Preset configures many settings that are the same as the above prior three screen captures, seen using the unofficial/blacklogo interface. The command line area (box at the bottom) where things are typed in, change the remainder of the settings so that they end up the same as the other interface settings in the prior three screen captures above.

    As you can see, these settings can be configured using the x264 interface for the codec, so no matter what game recording program you use* – be it Dxtory, Bandicam, MSI’s Afterburner, etc – you will be able to choose these settings, adjusting for your own tastes as you prefer (or adjusting to be within your hardware limitations). 

    [*The game recording application must be able to use ‘external/third-party codecs’, i.e. other codecs not included with the program itself, that you have installed on your system, in order to utilize the x264 interface for the h264/avc codec]

    For more detailed coverage of the settings used when recording with h.264/AVC [in an article that focuses more on speed of recording, reducing ‘lag’/choppiness], where to download the codec/interface and how to start using it in Dxtory, Bandicam and MSI’s Afterburner, see this earlier post here at the blog:
    http://gametipsandmore.blogspot.ca/2013/05/game-recording-with-mpeg-4-using.html

    Please note dear reader, that I am not saying “This codec is the best one to record with” or “use this one only”.
    I am merely showing that it is possible, or how to tweak it for quality or file size, as to your own personal preference.
    There are many codecs out there to choose from when game recording and although some are more apt for certain types of games than others, overall it is your own choice to use whichever one you prefer. Do some short tests and see which one works best for you and your current system – and try to have fun with it



    Have Fun Recording with H.264/AVC and See You In The Games!

    Workout Fuel Conclusion

    Workout Fuel Conclusion

    WORKOUT ANYTIME has been holding a month-long competition on our Facebook titled “Workout Fuel” where fans were asked to submit their favorite pre-workout and post-workout snacks. Each comment acted as a submission and each like on a fans comment acted as a “vote.” In our final week of “Workout Fuel” each weekly winner is going into a head-to-head competition. You the fans may vote on your favorite workout snack! You can vote here: http://bit.ly/WorkoutFuelFinal
    Workout Fuel | WORKOUT ANYTIME

    MINIMALIST RA HOUSE DESIGN BY BAQUERATTA

    The Minimalist RA House was designed a Tokyo company called Baqueratta.They have a good past in minimalist small residences.The entire house was furnished with modern and minimalist furniture.I love this house and I hope to have someone in future, but I especially like the bathroom.

    Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

    Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

    Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

    Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

    Minimalist RA House Design by BaquerattaMinimalist RA House Design by Baqueratta

    Energy Drinks Pros and Cons

    Energy drinks have become a staple for many people, and there is lot of controversy about whether or not they are safe to drink.    Like most things the devil is in the details when it comes to energy drinks.
    Sugar Content
    One of the first points to consider for energy drinks is their sugar content.  Sugar is something the vast majority of people could do with consuming less not more.  People who drink energy drinks with high levels of sugar are taking in a lot of extra calories – up to 200 calories for large energy drinks with sugar.     This not only contributes to weight gain and slows or prevents weight loss – it can also wreak havoc on the millions of people with outright diabetes and the many millions who are on their way to diabetes due to insulin insensitivity from too much sugar intake and not enough exercise.
    Artificial Sweeteners
    Although sugar/carb free energy drinks do not have the issues associated with sugar described above – artificial sweeteners are clearly not healthy.     Now like all things it is all about the dosage consumed on a regular basis so someone having a single beverage with artificial sweeteners daily is very different than someone having four!
    Caffeine Content
    Another important consideration is the “energy” ingredients contained in the drink.     The most common ingredient is caffeine and the typical energy drink contains about 200mg of caffeine or the same amount you get in a large coffee.    If you are an adult and accustomed to caffeine this will provide an energy bump but will not send you into convulsions!    
    However, it is all about your size and your experience with caffeine.    The more you take in caffeine the more accustomed you become to it, and larger individuals can safely consume higher quantities for obvious reasons.     Moderate caffeine intake – 300 to 400 milligrams of caffeine per day — carries “little evidence of health risks and some evidence of health benefits,” conclude researchers from the Linus Pauling Institute at Oregon State University in Corvalis, writing in Critical Reviews in Food Science and Nutrition in March 2006.    This equates to 2 average size energy drinks per day.
    Other Stimulants
    Yohimbine is another potent stimulant so adding this together with caffeine can cause big problems – particularly in those with existing high blood pressure.
    N-methyltyramine, Octopamine, and synephrine are other stimulants.     As with Yohimbine best to steer clear of any energy drinks containing any of these ingredients! 
    Amino Acids
    Most energy drinks include amino acids like L-Phenylalanine and/or L-Tyrosine.   These amino acids act as precursors used by the body to produce excitatory neurotransmitters and hormones.      So they can amplify the effects of caffeine.      NOTE: for people with Phenylketonuria (commonly known as PKU) phenylalanine can be dangerous but there is a mandatory warning on all energy drinks containing this substance.
    Another common energy drink ingredient is the amino acid taurine.  Taurine is found in large amounts in the brain, retina, heart, and blood cells called platelets. The best food sources are meat and fish. Excess taurine is excreted by the kidneys.  Taurine promotes cardiovascular health, insulin sensitivity, electrolyte balance, hearing function, and immune modulation.  Authors of a 2012 study actual made the following statement concerning Taurine: “Considering its broad distribution, its many cytoprotective attributes, and its functional significance in cell development, nutrition, and survival, taurine is undoubtedly one of the most essential substances in the body.”    So Taurine is not toxic either.
    Another popular ingredient is Glucuronolactone which is added to “aid in detoxification”.  Interestingly enough there actually is some science supporting this claim.    More importantly it does NOT seem to be toxic in moderate doses used in most energy drinks.    Like the amino acids mentioned above glucuronolactone is produced in the body naturally so it is not foreign to cells.  There is an urban legend that this ingredient causes brain tumors but this is just that – a legend!
    B-Vitamins
    Most energy drinks contain the following B-Vitamins in significant doses:
    Niacin – Niacinamide
    B-2 – Riboflavin
    B-6 – Pyridoxine Hydrochloride
    B-12 – Cyanocobalamin
    B-5 – Pantothenic Acid
    B-Vitamins are water-soluble meaning excess will simply be excreted in the urine, and not having enough B-Vitamins can cause serious issues because B-Vitamins are essential for energy production and many other functions in the body.  
    So Why All the Concern?
    Like all stimulants – energy drinks can be abused with potentially serious consequences.     Heavy intake (3 or more per day) can cause nervousness and anxiety and heart palpitations.   For those with anxiety disorders, heart disease, or high blood pressure this is a real concern.     Anyone with a heart arrhythmia should check with their physician before taking any type of stimulant including caffeine and energy drinks.
    Certain energy drinks like “Redline” which contain multiple stimulants have very specific directions to only consume half a small bottle with a warning that should scare most people.     It is very easy to forget and consume a whole bottle and put yourself in a very uncomfortable and potentially life-threatening situation.   
    Always look at serving size, dosage and ingredients and start with smaller intake.    Gradually increase intake.  

    Last but not least stimulants can ruin your sleep – so be very careful not to take them past Noon.     Also if you start to develop sleep issues cut back your intake of all stimulants – this almost always helps!     Remember stimulants are not a substitute for rest, sleep, healthy diet, and exercise!

    Immune Complex Food Sensitivity

    These occur when antibodies attack allergens but don’t manage to kill them. The result is an allergen (called an antigen) with an antibody stuck to it. This creates a whole new animal (an antigen-antibody complex) that the body doesn’t recognize. When this happens, the ‘new animal’ starts circulating around the body, and this circulatory immune complex, or CIC, can eventually lodge in tissue.

    CICs create many of the same reactions as classic allergies. When they circulate through or lodge in tissues, such as those of the kidneys, lungs, liver, or joints, they can cause terrible problems by starting immune and inflammatory responses. They can cause joint problems similar to arthritis, and they can cause organs to malfunction. They often interfere with the body’s filtering mechanisms, such as the lymphatic system and kidneys. Some researchers believe they contribute to many types of kidney disease, some of which are eventually fatal.

    Diet Start

    Sometimes, people with serious CIC problems experience widespread conditions — such as migraines, kidney problems, and joint pain — and never realize that all of these problems have a single cause.

    Frequently, patients come to me hoping only to lose weight, but when they resolve problems such as excessive CIC production, they also overcome other serious health conditions. One recent patient, for example, not only lost 22 pounds but also recovered from chronic joint pain, migraines, and gallbladder inflammation. This patient was happy to lose her weight, but was overjoyed to solve the other problems. Of course she had to make a serious commitment to her health and change her lifestyle. But she enjoyed the whole process, because she felt so much better every step of the way.

    This reinforced my belief in the adage, ‘If you just strive for thin, you’ll never win. Strive for health, and thin will follow.’

    Now you know about the risk factors that make you vulnerable to food reactions, and you know how food reactions work. Good for you! You now have more knowledge about this subject than many doctors do.

    Now that you have a good foundation of knowledge, you’ll be able to understand why food reactions cause bloating and swelling. Once you understand this, you need never again be a victim of false fat.

    Paperless Mission #7: Annotating Rubrics with GoodReader (iPad)

    This is the seventh post in my Go Paperless! Challenge Series. If you haven’t completed the previous missions, be sure to complete those first.

    • Mission #1: Gather Your Tools
    • Mission #2: Build Evernote Notebooks
    • Mission #3: Email Notes to Evernote
    • Mission #4: Create Checklists in Evernote
    • Mission #5: Organize Your Files in Dropbox
    • Mission #6: Setting Up GoodReader (iPad)
    Also be sure to link up at the Go Paperless! Linky.

    Mission #7: Annotating Rubrics with GoodReader (iPad)

    I try to give my students high-quality feedback whenever possible, especially on their writing assignments. In the past, it would take me days to grade all of their papers and write hand-write comments on their rubrics. So when I passed those papers and rubrics back to students, it would kill me to see students stuff them into the abyss of their backpacks, or worse — toss them into the recycling bin. I wanted them to take it home and share it with their parents, and I wanted them to be able to refer back to that feedback. Eventually I learned to photocopy the rubrics before I passed them back, but that still wasn’t ideal. It created more paper clutter and one more thing for me to work on organizing.
    When I say that GoodReader has become one of my all-time favorite apps, I mean it. I now use GoodReader to fill out rubrics and other student feedback. To start, make sure that you have the rubric saved as .pdf in Dropbox. While GoodReader can read any type of document, it will only annotate a .pdf. Then open up the .pdf of the rubric in GoodReader (see previous tutorial).

    Choose the highlighter tool to highlight the appropriate categories on the rubric. The first time that you go to annotate a document, it will ask you if you want to save to this file or create an annotated copy. If it’s a document that I’m only planning to use once or student work, I typically select “Save to this file.” When I’m planning to use the document over and over again, though, I’ll create an annotated copy. That’s what I’d choose when using a rubric to grade student work.

    Once I’ve made my selection, I’ll be able to annotate all over the document. Once you’re in the highlighter tool, you can drag your finger over the text that you want to highlight. You can change the color of your highlighter, and you can also delete highlights by tapping on the highlighted area.

    At the end of the rubric, I like to type specific comments for my students. To do that, choose the typewriter tool. A little window will pop up for you to type your comments, and then it will save them to the document. If it saves it in the wrong spot, simply tap on the text and a new menu of options will appear.

    You can drag and drop the text into the correct space and re-size the text area to get it formatted the way you’d like.

     When you’re done annotating the rubric, tap the center of your screen to see the “My Documents” option.

    From there, you’ll want to rename your file. To do this, select “Manage Files,” then tap on the annotated copy of your rubric and select “rename.”

    Once you’ve renamed your document, you’ll have some options for moving it. First, I send a copy to the student’s notebook in Evernote. To do this, tap “Manage Files” again, select your newly renamed document, and select “Open In.” A new window will pop up asking how you’ll want to save the file. Select “Flatten annotations” because that will preserve your edits and merge it into the document so that you don’t lose your work.

    Once you’ve chosen that, another window will open showing which of your installed programs you can open it in. As you can see, I’ve get several options available. You could also upload it directly to Dropbox if you would like to back up your work there rather than in your student notebook. This might be a good option if you have a folder shared with the student for passing back work.

    When I’m ready to hand back the rubric to students, I open it in Edmodo and attach it as a direct message to the individual student. This allows the student and his or her parents to see it. They could also download a copy if they’re using a computer. (I’ve had mixed results with document downloads through Edmodo on the iPad.)

    This system has been incredibly helpful for me. It’s easy to manage because I don’t have to keep track of paper or make sure that I’ve made enough copies of the grading rubric before I start grading. Just one more step in the quest to curb paper clutter.

    What are some other ways you can imagine using GoodReader in the classroom? I’d love to hear your ideas in the comments section!

    CONCEPT KIDS ROOM PAINT COLORS DESIGN

    KIDS BATHROOM PAINT COLORS

    Looking for ideas for decorating Kids Room Paint Colors? Enter a space about the longevity of choosing background elements that are long lasting. Then use the equipment, bedding, area rugs and cheap to create themes easily hangeable. Unlike other rooms of the house, which mainly reflects your personality, decor rooms children requires slightly different approach. If you are a first time parent or a veteran, decorating baby rooms are not childs play.

    This is a very complex process in which an adult is to incorporate all the safety features and mix with a childhood fantasy. The room is a device identification of the child, not yours. But the change of the children, then you need to think ahead: the design is easy to change a child of five years or two? There is room for storage, research, animal or doll collections, or a wrestling match?

    First, consult with the child. Be sure to consider the child likes or dislikes when decorating their space. Decorating the kids room paint colors is a work in progress – planning begins before birth and continues throughout childhood. You can be as creative and on top of your child you are dynamic and playful colors work well in a child’s room. Always paint childrens rooms with a semi-gloss, if the walls are easy to dry without being too bright.

    Regarding storage, check your local do-it-your-own for a wide range of affordable solutions. As children grow, learn, play and explore their environment should respond. Children will love the exciting makeover, because they focus on their preferred interests in all age groups. As your child grows, ask for their input for kids room paint colors.

    KIDS ROOM PAINT COLORS
    KIDS BEDROOM PAINT COLORS

    And More: Deals and Sales – Free from EA, Battlefield Hardline’s Betrayal Expansion/DLC, Until July 12th [Notification]

    Just a quick Notification, for those interested in Battlefield Hardline, that an Expansion for it is currently being offered Totally Free from EA via their “On The House” promotion:

    Screenshot of the Information Panel in the Origin Client for the Battlefield DLC/Expansion, Betrayal
    (Click to see Full Size)

    Free right now, EA is offering the Expansion for Battlefield: Hardline called Betrayal, which features 4 new maps (Thin Ice, Chinatown, Cemetery and Alcatraz), 2 New Vehicles, New Weapons (Personalize up to 5 Weapons with the Gun Bench and Test Weapons in the Gun Range!), New Assignments, New Camos, New Paints, and more [Inquisition Swooooord!lol]. While it does require the Base Game Battlefield: Hardline, even if you don’t own Hardline itself, you can Add it to your Origin Games Library and then Download it when you get Hardline in the future. If you are a Subscriber to Origin Access, you already have this available, for ‘free’ (it is part of the Vault Games available to you).

    The Expansion/DLC itself was originally released in March of 2016 and although it may not help with there only being a handful of servers in North America on PC with a high number of players on them (there are a lot more if you are part of the EU), it is still worth going and grabbing [in my opinion, especially if people end up coming back or playing more in the future. I have already seen an influx of new players, thanks in part to EA’s recent Up-to-75% Off Sale and DLC Giveaways].

    I have also been working on a “One Sentence Review” of all the Weapons in Battlefield: Hardline that I want to post here at The Blog in the future; but for now, if you are interested at all in Hardline, grab this while you can – and See You In the Game!

    [Personal Note: I am not affiliated with, nor receive any benefits of any kind from EA/Origin (check the Links, there are no ‘Affiliate Tags’ or anything on them); I am merely an enthusiastic gamer who tries to pass on information to other gamers, when I can. Enjoy, dear reader.]

    great old Lincoln with a rarely seen running board mounted search/spot light, 2nd windscreen, and fatman / tiltlock steering wheel

    Quick Tip: Medieval II Total War – ‘Fatal Graphics Error’ [Possible Fix]

    I first bought this great game as a DVD Retail Box and then later on purchased it through Direct2Drive [when Direct2Drive was around, then that service became GameFly (2015 Edit: and now it’s D2D again)]. I also have it on Steam as a backup digital download source – it’s too hard to resist those really cheap Steam Sales! Recently, I was Re-Installing M2TW, to begin conquering the world once again… However, I was surprised to see nothing but an error message (on Windows7):

    The “Fatal Graphics Error” message, when starting MTW2

    I personally found this error humorous, as it complained about Graphic Settings – and I couldn’t even start/get into the game to change or even set them in the first place! So, I started Troubleshooting….

    Apparently, a lot of people, on many forums, have been getting and asking about this error – and still are – so here is a great chance to share this Quick Tip on a simple ‘fix’ for it I eventually found, simply by playing with the Shortcut Properties:

    Right-Clicking on the Shortcut for the game and editing the Compatibility Tab to match these settings,
    is how I fixed the Fatal Graphics Error problem when I played M2TW recently. Try it out!
    Click image to see Full Size

    After making these changes to the Shortcut that runs the game (adding two quick checkmarks in the checkboxes shown above), after launching it should show a black screen [detecting settings?] momentarily and then load up the game properly (you may have to click on the icon in the Taskbar [Windows] to bring it up a second time) but that’s it!
    Hopefully that works for you all, as it did for me.

    See You In The Games!

    The Nordic Hamstring Curl: Best Hamstring Exercise You are Not Doing!

    There are many different hamstring exercises including variations of leg curls (seated, prone, and standing) along with several different hip hinge exercises that target the hamstrings (RDL, Single Leg RDL, etc).     These are all great exercises, but none of them can touch the Nordic Hamstring Curl for building eccentric strength and preventing hamstring injury in sprints and sport!
    This is a tough exercise so warming up the hamstrings is essential.  Using other hamstring exercises first such as bodyweight hip hinges and light leg curls on a machine prior to this exercise do the trick nicely.   It is also a good idea to do some static stretches for anterior hips and hip flexors to shut them off which helps to allow for maximum hamstring activation.
    To perform the Nordic Hamstring Curl you need to find a place to hook your heels under when you are in a double leg tall kneeling position so you will also need padding under your knees.     If you have a workout partner you can have them kneel behind you and hold onto both your legs right above the ankles keeping their arm straight so they can use their bodyweight to apply load as you let your body fall forward like this:   http://willlevy.com/wp-content/uploads/2014/08/Nordic-Curl.jpg.     You can also find something to hook your ankles under like the horizontal bar from a weight machine or barbell like this:   https://i.ytimg.com/vi/f_GdZKdwovA/maxresdefault.jpg or  this:   https://s-media-cache-ak0.pinimg.com/originals/29/04/34/290434956cdd220cc8d6e0b18948cf3c.jpgor this:  https://www.t-nation.com/img/photos/2013/13-775-04/Nordic-Start.jpg
    Keeping your hips flat (straight line from knees through hips and shoulders) – you lower your body down slowly until you can no longer hold your weight then catch yourself in push-up position and push back up:  https://simplifaster.com/articles/wp-content/uploads/sites/5/2017/03/GHR.jpg.       You can also use a band during the exercise which provides progressively more assistance as you go lower towards floor to allow you to potentially perform the full range of the motion and come back up with the assistance of the band.    Then over time you gradually decrease the assistance of the band by user smaller and lighter bands.      This provides a good video of how you can do this by attaching a band overhead and behind you:  https://www.youtube.com/watch?v=LQm9rdzZlRk
    There are also numerous machines designed for this exercise including:
    http://www.roguefitness.com/floor-glute?prod_id=15905&gclid=Cj0KEQjwnazLBRDxrdGMx-Km4oQBEiQAQJ1q68P3rah0ZwofpsxOA-xSYl5_v9mtTSxSmuG5zIW1KUYaAvPW8P8HAQ
    http://www.speedbottraining.com/glute-ham-machine/
    http://www.gluteforce.com/
    Here is a 6 week progression:
    Week                   Sessions/Week                  Sets                       Reps                     Rest
    1                                           1                            2                            5                            2 min.
    2                                           2                            3                            5                            2 min.
    3                                           2                            3                            6                            2 min.
    4                                           2                            3                            7                            2 min.
    5                                           3                            3                            8                            2 min.
    6                                           2                            3                            9                            2 min.

    Marathon Training Tips

    As the saying goes “those who fail to plan – plan to fail.”   This is true in business and it is also true in preparing for rigorous athletic events like running a marathon.     Successful completion of a marathon is all about creating a plan based upon the goal of completing a marathon on a specific date in a specific location.
    Determining Starting Point

    The length of your plan will depend on your current fitness level relative to running.  So the first step is determining your current fitness level which can be done in several different ways:
    If you are currently running you can get an idea of your current fitness level based on how often you run, how far you run, and your average pace when running.
    If you are not currently running, then do a 12 minute run test – see here for a how to guide to perform this simple test:  https://www.brianmac.co.uk/gentest.htm
    Once you know your starting point you can determine how long it will take you to prepare adequately to complete a marathon. The key is slow and steady progression of average distance per run and total weekly training miles – go too fast and you WILL get hurt!    The body needs time to adapt to the stresses of running.    A good rule of thumb is to increase your weekly mileage (and mileage per run) by no more than 10% per week.
    So if you are currently running 15 miles per week you would only increase total mileage to 16.5 miles per week and if your long run was 5 miles you would increase it by half a mile.
    In order to successfully complete a marathon, you need to be running somewhere between 30 and 50 miles per week with individual runs of 16 – 23 miles.  The advantage of gradually building up to a 20 – 23-mile run is that you have mental experience with running over 20 which can be very challenging the first time you do it.   That being said, placing too much emphasis on distance can result in over-training if not done carefully.
    Training Mix

    Assuming you have a base of running 15 or more miles per week on a consistent basis you should begin to mix up your training by including shorter, harder runs with longer slow runs and at least one interval training session per week.      
    It is critical that you have a training base of steady mileage prior to increasing training intensity and beginning interval training where you will perform higher intensity intervals of quarter mile to half mile mixed with recovery periods.   
    There is an entire science behind interval training and the best athletes train with a heart rate monitor all the time to precisely determine the intensity of their work intervals and how long they recover during rest intervals of slow running/jogging or walking.     This is one of the many reasons that, in an ideal world, you work with a running coach/trainer who has experience designing and working with runners to prepare for marathons and other runs.   A good coach will help plan and adjust your training based on how you progress from week to week which is essential for the best results!

    Strength and Mobility Training

    Running requires a lot more than just cardiovascular and muscular endurance – it requires specific strength and mobility to avoid injury and allow for optimum running technique.  Integrating a run specific strength and mobility program into your training can be a game changer and the program should include:
                A specific dynamic warm-up and foam rolling for areas of tightness and pain
    Dynamic Warm-up:  http://www.active.com/running/articles/before-you-run-the-dynamic-warm-up
    Foam Rolling:  http://www.runnersworld.com/foam-roller/how-to-use-a-foam-roller
    Cool-down with run specific stretches – http://www.runnersworld.com/injury-prevention-recovery/5-post-race-standing-stretches-every-runner-should-do/slide/1
    Strength Training Exercises for Running
    It is essential to have great core and glute strength to properly stabilize the body during the impact of running to prevent injury.
    It is also critical to strengthen all the muscles of the lower body including the hamstrings, calves, and intrinsic muscles of the feet.
    Sample Strength Training Program for Runners:  http://www.runnersworld.com/strength-training/10-essential-strength-exercises-for-runners/slide/2
    Putting it all together

    If preparing for a marathon seems like a lot of work and complicated that is because IT IS!    Like running successful business assessing your starting point and setting a realistic goal with a specific plan of action is key.     Also having a coach is HIGHLY recommended to not only help you create a realistic plan and schedule but to monitor your progress and adjust your workouts and plan accordingly.  

    Men’s Body Click Diet part 3

    What happened with my patient Brooks shows how this scenario plays out. It also reveals why I think that such mysterious and sometimes chronic inflammations of the prostate are usually not infections but instead have a lot to do with factors that are also related to abnormal growth or cancers of the prostate.

    Brooks is a 50-year-old businessman whose previously dependable penis had become much less reliable with regard to its sexual responsibilities. At the same time he suffered from discomfort with urination, some hesitancy in starting his urinary stream and the need to get up at night to urinate more than once, which had been his previous custom. He was alarmed that whatever was going on represented some sort of permanent equipment failure. Told at first by both a general practitioner and a urologist that his prostate was ‘pretty normal’ and later that it was a ‘little enlarged’, he had undergone two courses of antibiotic treatment for nonspecific prostatitis. His symptoms improved while he was on the antibiotics but returned when he finished the medication.

    I had a telephone consultation with him and after hearing him out and considering various possibilities, I suggested to him that he had ‘some kind of mischief’ with his prostate. This was a much softer diagnosis than that of nonspecific prostatitis. But it suggested a treatment that was aimed more at making his prostate happy than at trying to kill some unseen, unidentified and perhaps nonexistent germs.

    Diet Start

    The concept of trying to make some organ in your body happy seem, alien to a regular guy like Brooks. He shares with most people the medical notion that there is a specific treatment for every condition and that this treatment is not a strategy to make some part of your body happy. It did, however, make Brooks happy when I suggested that part of his therapy was at least daily efforts to encourage the emptying of his prostate and its tubing by provoking an ejaculation. This was contrary to the no-sex advice he had been given earlier, which seemed to me like the equivalent of telling someone with a bad cold not to blow his nose.

    I offered Brooks a package of additional measures to make his prostate happy. These included daily doses of soy protein, flaxseed powder, flaxseed oil, zinc and an antifungal medicine. If you understand why I loaded my shotgun with such a diversity of remedies and how they all fit together, you will also see how I perceive that the whole range of prostate mischief from inflammation to cancer fits together.

    I’ve already explained the soy protein and flaxseed powder. I also recommended an additional supplement of flaxseed oil. The prostate gland is one of the richest sources of the hormonelike substances that are made from omega-3 fatty acids, with which flaxseed oil is loaded. They are called prostaglandins, named for the very organ under discussion, because they were first isolated from fluids found in the prostate. (Soon after their discovery in prostatic fluids, they were found to be present in a wide variety of animal tissues of all kinds and not at all exclusive to the prostate, but the name stuck.) The use of fatty acids in flaxseed oil helps the prostate make prostaglandins. But the more important motive for a prescription of flaxseed oil was the strong likelihood that Brooks, like most people, was deficient in omega-3 oils. The flaxseed oil, then, was generally beneficial rather than a treatment aimed specifically at the prostate.

    I recommended that Brooks take zinc because it helps the immune system fight off infections and control the body’s inflammatory response to infection. Finally, I prescribed the antifungal medicine because of my consistent experience with other patients where I’d seen that an overgrowth of fungus germs, particularly yeasts, has a proclivity to bother people’s reproductive systems. I have often found stubborn cases of prostate problems in men to be responsive to antifungal drugs.

    But there’s another, more important angle to the antifungal treatment Igave Brooks and the many other men I’ve treated in a similar way. In order for the isoflavones and lignans in soy protein and flaxseed powder to be transformed into the substances that beneficially modulate hormone chemistry, they must pass through the digestive tract, where they are changed by certain germs that live there. If the normal distribution of healthy flora has been disturbed so that there are too many bad germs and not enough good germs, the capacity of the intestinal flora to help hormone chemistry will be seriously impaired. Antibiotics are by far the most significant disrupter of intestinal germ populations. A single course of an antibiotic prescription can affect this balance for months or longer. My prescription of an antifungal medicine for Brooks was aimed at two overlapping targets. One was the possibility that a fungal infection was directly related to the prostate inflammation; the other was that his two courses of antibiotics had made him worse by causing a disturbance in his bowel germ population that would correct itself once the number of yeast germs living there was reduced.

    Within ten days Brooks and his prostate were both happy. His equipment returned to reliable functioning and he has remained well since. He is as pleased as he is surprised. This is true for many men whose similar responses to simple changes in diet don’t jibe with their expectation that I would have to treat them by calling out the big guns rather than coaxing their bodies back into balance. I’m confident that the remedies I suggested for Brooks worked because they were specifically connected to achieving a hormonal balance governed by a combination of factors related to his digestive flora and an intake of substances that made his prostate happy.

    It’s not a big step from consideration of acute problems, such as what Brooks had, to the more chronic problems of prostate enlargement andprostate cancer.

    the factory cheated too… Jack Werst’s Super Bird, also known as the “Cheater Bird” was built specifically to take out a Ray Allen, driving an LS6 Chevelle that was causing problems for Chrysler in a certain drag class.


    Above the 5/50 Super Bird facing off with Ray Allen’s LS6 Cevelle

    Arguably one of the most famous Super Stockers of 1970, the Fathom Blue, white striped Briggs Chevrolet/Truppi-Kling 1970 Chevelle SS 454 LS6 convertible, driven by Ray Allen, was also one of the most successful, winning nearly every NHRA-sanctioned race it entered in 1970.

    The “Killer Car”, as it was called, dominated its competition in SS/EA, winning the US Nationals, the Super Nationals, the World Finals, and most of the division races it entered.

    In fact, Ray Allen’s Chevelle was so dominant that Chrysler built a special Superbird with the sole intent of taking out Ray and his pesky Chevelle. Regrettably (or perhaps by design), Ray took himself out before Jack Werst’s Superbird had a chance.

    By years end, Ray Allen’s 1970 LS6 Chevelle convertible had laid down a best elapsed time of 11.05 seconds, set a National record in SS/EA with an 11.33 ET, and was crowned as the 1970 Super Stock World Champion. 

    The Super Bird was sold and became the Tosten Jennings Enginuity IV / Phoenix (word is written on the uprights above the Super Bird logo

    First off, the rear axle is moved forward 2-1/2 inches, and the wheel well is opened up. Why isn’t it obvious? Hamerly’s job, as the painter, was to use colors and create patterns that would distract the eye from the alterations. Obviously, he was successful. The engine is moved back 2 in. The right front wheel is moved 1-1/2 forward of the front left, for a big advantage in the staging beams. The fenders and hood are lightweight metal (not acid-dipped). The rear glass is thicker and heavier than stock, and the filler panel around the glass is weighted. Also weighted is the upper center tail panel, and there’s additional weight behind the tail lamps. The wing supports are pot metal, but the top of the wing is heavier than stock. A 1-1/2-in. thick sheet of lead, hidden underneath the rear package tray, runs the width of the car. Other mods that probably were legal, included a Prestolite transistor ignition up in the nose of the car, and an auxiliary electric fuel pump inside the frame above the left rear wheel.

    Jack Werst’s car was originally a Petty car that Chrysler re-routed. It was factory built as a stick and later converted to auto.

    There are quite a few “hidden” tricks that MANY people never knew and might not believe. The wheelbase was changed.

    The well-tuned 512 cu. in. Hemi cheater motor Chrysler built to beat Ray Allen was immediately removed and sent back to Chrysler after the race that never was. Werst red-lighted on purpose so the car could not be torn down.

    The sail panels were filled with ballast.

    The engine was set back.

    RM23ROA181257

    http://classracer.com/classforum/showthread.php?t=33830&page=3

    Chrysler engineers put together two SuperBirds for Indy–an automatic, that would be driven by Jack Werst, to compete with Ray in SS/EA and a 4-speed which would be campaigned by Ronnie Sox in SS/E. Werst’s Bird came to the race shop as a radio-delete 4-speed car, that the engineers converted over to a 4-speed, swapping out the Dana rear for the auto-correct 8-3/4.

    The fender tag, as decoded by Galen Govier, indicates a special-order car for the sales bank. According to Jack Werst, the Bird was delivered to the race shop with no vinyl top–something that all SuperBirds came with in order to hide the filler panel for the smaller rear glass.

    The 426 Hemi that was in the car at the time it was dropped off at the race shop was built by Frank Bash–considered to be the Ray Barton of his day. According to Werst, the Bash powered Bird ran a best of 11.03 at 118 mph. Good, but not good enough to beat Ray Allen. But, Plymouth was holding a trump card.

    According to Werst, “when you worked for Chrysler, you did what you were told.” So, when the trucking company dropped off an engine that was shipped from Chrysler, nobody asked any questions. The Bash motor came out and the new engine went in. Now, this was no ordinary 426 Hemi, but a well-tuned 512 cu. in. Hemi cheater motor.

    So, just how quick was this 512 Hemi SuperBird? A week before Indy, Werst made one time-trial pass at Atco Dragway in New Jersey and clocked a 10.39 at 122 MPH–a track record.

    http://www.dragracingonline.com/archive/features/featurecar/vii_9-superbird-1.html

    Jack Werst, had named his Hemi Plymouths “Mr. 5 and 50”, a reference to his side career as a regional warranty manager in the Philadelphia area.

    Offered a job as a Chrysler management trainee, Jack earned his moniker when the regional sales manager named him Mr. 5 and 50 after a Chrysler warranty promotion. Armed with an A-990 Plymouth Hemi, Jack gained national attention by going deep in Super Stock eliminations at the U.S. Nationals in both 1965 and 1966. That led to him receiving one of the first flyweight Hemi Barracudas built by Hurst Performance.

    https://www.hemmings.com/blog/2014/12/26/jack-werst-mopars-mr-5-and-50-passes-at-75/
    http://www.dodgecharger.com/forum/index.php/topic,9978.msg118477/topicseen.html#msg118477

    Quick Tip: Planetside 2 – Medic Revive Not Working [Note]

    Just a quick tip for those who have recently jumped back into playing some frantic Planetside 2 and thought there was something wrong with the medic tool, being unable to revive, thinking they can’t revive, etc – there was a patch a bit back that changed the Medic Tool so that Left-Click will Heal and Right-Click will Revive. Although changing such a long running/’staple’ operation is a little lip-pursing, it should have the overall positive effect of assisting with attempting to revive within a tight group of teammates (instead of your tool randomly healing someone close, it should more effectively target the face down teammate on the ground). Just a note.

    See You In The Games!

    How to Get Rid of Cellulite

    Although the vast majority of woman have some cellulite somewhere on their body – nobody likes it!   So what the heck is cellulite anyway?  Cellulite is pockets of fat that have squeezed between bands of tissue, called septae, that are located below your skin.

    Women of all races get it, while virtually no men do. That’s because the septae of men are different from women. Men have stronger bands that are cross-hatched allowing them to keep fat in place more effectively. Women have weaker, vertically oriented septae that allows fat to squeeze through easier.

    Both thin and heavy women have cellulite. However the higher your level of body fat the more noticeable the dimpling will tend to be.  Unfortunately dieting does necessarily help eliminate cellulite. Losing weight helps sometime, but in some cases weight loss makes cellulite worse.   This occurs when skin becomes saggy after significant weight loss.

    There is a definite genetic component to cellulite which does run in families.
    Hormones also are part of the equation with cellulite, but science has not figured out exactly how hormones contribute to cellulite.  What is known is that cellulite starts at puberty which is a time that many hormone levels change significantly in females.

    Getting Rid of Cellulite

    Getting rid of cellulite is easier said than done.  Even treatments like Liposuction are not necessarily effective.    In fact Liposuction often makes cellulite worse by leaving your skin even more puckered looking than it was before.

    Dermatologists are quick to point out that there is no magic cure for cellulite, but there are ways to make it look better!   Two of the keys are working out and dropping excess weight sensibly (1lbs per week! – faster weight loss can exacerbate the problem!)

    Resistance training is key.   As you increase your muscle size and decrease body fat your skin looks smoother.     If you lose fat while you simultaneously build muscle your cellulite will improve.
    It is also important to work on the health of your skin as you age to make it more elastic so that as you lose fat the skin pulls tight rather than sagging.    

    Certain topical treatments that increase collagen in the skin, like Retin-A or creams with retinol or vitamin C, cannot hurt and may help.   

    Maintaining adequate water intake is also key for skin health and elasticity – 6 – 8 glasses of water per day is key.

    If you have faithfully tried everything and your cellulite is driving you crazy and you are prepared to spend some serious dollars – Cellulaze – is an FDA approved therapy.  Cellulaze involves inserting a lazer under the skin and projects heats in three directions and literally liquefies fat as it cuts the septae around fat cells which can reduce the puckering while also encouraging collagen regrowth.

    Cellulaze claims a 70 – 80% improvement in cellulite that lasts a full year.  It is most effective for active women with mild to moderate cellulite who are not significantly overweight and who also have good muscle tone.

    Unfortunately, Cellulaze is not cheap – costing $5,000 – $7,000 depending on the size of the area being treated.

    Fast DietaryTrack rules

    During this first two weeks you need to:

    • Eat about 150g (5oz) of protein per day, which should come from a portion about the size of your palm at each meal, plus two all-protein snacks per day.
    • Eat around 20g of carbohydrates per day. A simple way to work this out is to use a set of measuring cups (a cup holds 250m1/8 fl oz). You should aim to eat approximately 3 cups of low GI vegetables or 2 cups of low GI vegetables and 1/2cup low GI fruit — at least half of which should be eaten raw.
    • Get 30 per cent of your daily calorific intake from fats, which may include: olive oil, walnut oil, grapeseed oil, coconut oil, homemade mayonnaise, flaxseed oil, small amounts of butter, small amounts of sour cream
    • Drink 8-10 glasses of water daily; you can also drink herbal teas, but avoid alcohol, soft drinks, tea and coffee, because caffeine interferes with ketosis
    • Avoid artificial sweeteners, which can stimulate insulin secretion
    • Rev up your protein levels by including at least one whey-protein drink per day
    • Eat enough — otherwise you may start to burn muscle tissue
    • Avoid starchy, carbohydrate-heavy foods such as pasta, bread and potatoes
    • Beware of hidden carbohydrates in sauces and dressings
    • Check the labels of all foodstuffs and avoid all processed foods
    • Not give up!

    Diet Start

    Dietary Q&A

    Q. I have been restricting my carbohydrate intake for days now and I have no energy. I thought this plan was supposed to make me feel better, not worse.

    A. Your body is adapting to the metabolic conversion of burning fat for energy instead of glucose. This takes about three days in most people, which is why it is usually best to start the diet over a weekend when you are able to relax more. After three days you should see a rise in your energy levels, but if you continue to feel lethargic or unwell, stop the plan and check with your doctor.

    Q. Will I get enough fibre on this plan?

    A. Fibre is provided by the inclusion of fibrous vegetables and fruit, and is increased if you eat most of these raw. However, if you experience constipation during the initial stages, try adding psyllium husks or psyllium- husk powder to your whey smoothies, because they comprise 100 per cent soluble fibre. Psyllium husks are pure dietary fibre, composed mostly of cellulose. They swell when they come into contact with water and release

    a gelatinous mass (mucilage) which passes through the colon and aids easy elimination.

    Q. Why does a lowcarbohydrate diet cause bad breath?

    A. When you are on the Fast-Track Plan and restricting your carbohydrates to around 20g (3/40z) per day, you will be burning ketones, which may cause your breath to smell a little unpleasant. Don’t worry, this is easily masked by chewing parsley-oil capsules or by using a natural breath-freshener spray. Make sure that you drink plenty of water because this will help to neutralize the odour.

    Franchisee Spotlight: Nick Washmuth

    Franchisee Spotlight: Nick Washmuth 

    Nick Washmuth has always had a passion for fitness and health. After graduating from the University of Florida with a bachelor’s of science, Nick went on to receive his Clinical Doctorate in Physical Therapy and then Clinical Doctorate in Manual Physical Therapy. He practiced physical therapy around St Louis for seven years before relocating to Birmingham in August this year for his wife’s career.
    Nick is currently a core faculty member in the physical therapy department at Samford University, and is working on developing the university’s first physical therapy program. Upon receiving their accreditation, the faculty will have their first cohort of students in 2015, and Nick hopes to eventually use his future gym for field trips.
    How did you learn about Workout Anytime?
    I was looking to open my own physical therapy practice or a start-up gym, but with my inexperience in running a business, a franchise seemed like the best fit. I got in touch with Steven Elliott who happens to be a good friend of mine from college as well as WORKOUT ANYTIME’s Area Developer for Alabama, and I saw the success and fun he was having with his business.
    What are your future development plans?
    I want to saturate the market. There’s room for 10-15 gyms in the area. 

    “Can You Guess Where The Screenshot Below Is From?”, The Game Tips And More Blog’s Game Screenshot Identification Contest, Re-Starts Again Today! [Updated 2018-02-01 – Answer Image]

    It’s the 15th of the month – and it is time for something that I want to start up again (and not only because I have over 50,000 Screenshots burning a hole in my pocket, but mostly that) – something that I had going for a short time, three long years ago…

    The Next Installment of The Game Tips And More Blog’s ‘New-ish-sorta-but-not-really’ Contest:

    “Can You Guess Where The Screenshot Below Is From?”

    (A Game Screenshot Identification Contest)

    Having a ‘grand re-opening’ once again today – January 15th, 2018!

    All you have to do to win this contest, is contact me in any way you can (eg. Comment on this article
    below, Twitter profile tweet, email me or Comment/PrivateMessage TheBlog’s Steam Account by the end of the month, with these two items within your message:

    1. Your guess for the game the image is from.
    2. Information on how to contact you back (to receive Steam game gifts, etc) if you win.
    That’s it!
    **[Just a quick note to be careful not to include any information you do not wish to share ‘publicly’ when posting in the Comments area below or at Steam or sending a Twitter profile Tweet, as these messages are seen by ‘everyone’]


    Correct answers submitted by the end of the month (beginning at the time of this posting) will be chosen from randomly, where one Skillful Identifier will receive this month’s contest prize – which is: a gifted game from the Steam online store!

    [Note: Although I have been collecting Games on Steam over the past few Years, during Steam Sales,
    due to how Steam has changed Gifting games through Steam recently, you will have to temporarily become a Friend
    of TheBlog’s Steam Account (to receive the game – after receiving your Gifted Game, you may Unfriend of course)]
    Winners will also be announced in bold, large lettered-text, here on this posting and will thereby be immortalized on The Intertubes in perpetuity, proving to all other comers that you were “The Ultimate Game Screenshot Guesser Thingy Person” [aka. Gamer]!

    Previous Editions of this Contest [to ‘see how it works’] can be found at TheBlog, here:

    Can You Guess Where The Screenshot Below Is From – Contest #1
    Can You Guess Where The Screenshot Below Is From – Contest #2
    Can You Guess Where The Screenshot Below Is From – Contest #3

    Are you ready? Here then, is the Screenshot image for this month, below:

    [As you can see, the image is a portion of a full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

    Update!

    A week has gone by and there have been no correct guesses received yet… So, here is a HINT image; (an enlarged area portion of the Screenshot for this month’s Contest)! Ready?

    Here is the HINT image (with enlarged portion revealed), below:

    [Click the Image to see it at a slightly-larger Full Size – and as you can see, the image is a larger portion of the full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

    At the end of the Month, if noone has guessed correctly by then, I will return here and reveal the full Mystery Screenshot and the Game it was from – Good Luck, Gamers!

    Update!
    It has been two weeks since the Contest began and there have been no correct submissions! Aww….

    To end The Mystery, here is the answer for this month’s edition of
    ‘Can You Guess Where The Screenshot Below Is From’ (2018-01):


    The Answer for this month’s Contest could have been: “Marvel Heroes” or “Marvel Heroes Omega” or “Marvel Heros” or “I can’t believe they cancelled this great game that I only just recently discovered existed especially with all the future Marvel movies coming out what happened this timeline sucks”. Click to see Full Size

    Come back next 15th-of-the-month friends, when you can have another chance to be a Digital Screenshot Sleuth in the Fifth Edition of ‘Can You Guess Where The Screenshot Below Is From’ – and a chance to win the Prize that will be carried over to next time: a gifted game from the Steam online store!

    See You In The Games!


    (The Game Tips And More Blog Contest Game #2018-01)

    Battlefield 4: A Double XP Boost Is Currently Active ! [Notification]

    Just a quick notification to those interested in Battlefield 4 that a Double XP Boost is Currently On!
    http://battlelog.battlefield.com/bf4/
    GOGOGO

    See You In The Game!

    [Update: As of 2016-07-26, the Double XP Boost appears to be over… slash-sadface]

    DECORATING IDEAS FOR GIRLS BEDROOM GOOD

    True, the fairy tale castles and princesses to provide a wide range of ideas for rooms, but today, we would like to show you something new: the heart. You have seen the newspaper attracted to each student a sheet of paper or sticker. It is a known fact: girls love hearts. Therefore, these six theme rooms under furniture in cardiac function. The colors are also typical of girls (pink, light green, yellow, red, light blue). Chairs, pillows, blankets, nothing has escaped the powerful heart-shaped plan.Some these interiors are a little crowded for our taste, but again, this is not our goal manufacturers.

    DECORATING IDEAS FOR GIRLS BEDROOM RED COLOR

    DECORATING IDEAS FOR GIRLS BEDROOM RED COLOR

    DECORATING IDEAS FOR GIRLS BEDROOM YELLOW COLOR

    DECORATING IDEAS FOR GIRLS BEDROOM YELLOW COLOR

    DECORATING IDEAS FOR GIRLS BEDROOM PINK COLOR

    DECORATING IDEAS FOR GIRLS BEDROOM PINK COLOR

    DECORATING IDEAS FOR GIRLS BEDROOM BLUE COLOR

    DECORATING IDEAS FOR GIRLS BEDROOM BLUE COLOR

    DECORATING IDEAS FOR GIRLS BEDROOM

    DECORATING IDEAS FOR GIRLS BEDROOM

    Natural Masks To Remove Blackheads

    NATURAL MASKS TO REMOVE BLACKHEADS

    Natural Masks To Remove Blackheads – Excess oil on the face and rarely clean the skin is the main cause of blackheads. Blackheads usually appear in the form of black dots contain oil liquid contained in the nose and chin area.
    In order to successfully eliminate stubborn blackheads takes a variety of special treatments. Usually someone will do in the form of facial treatments at the salon, the use of masks to remove blackheads. Can also to do maintenance to the dermatologist that requires no small cost.
    Actually we can remove blackheads mask our own making. The mask uses only natural ingredients that are quite common we find in the house. In addition to cost, you also will avoid side effects.
    Natural Mask To Remove Blackheads - 1
    Natural Masks Transform Blackheads
    Make a face mask to remove blackheads is very easy, it just takes a little time and material to process it so that it becomes a mask. Besides the natural ingredients used to make the mask is also very easy to obtain. Here is the material that we can use as a mask.

    • Mask of White Eggs
    Egg whites can be useful to clear blackheads and helps tighten and nourish skin. You do this by setting up 1 egg, then separate the yolks and whites. Once the download is separated egg white, egg white and stir briefly until smooth. Apply the one on the skin and leave for 10 minutes, then rinse with clean water.

    • Masks of Bananas
    Bananas can be useful to make the skin look smoother and cleaner than stubborn blackheads. The trick is crushed 1 ripe banana, then add a little honey, apply to the entire face and leave on for 15-20 minutes. Then rinse with warm water and refresh with cold water.

    • Masks of Baking Soda
    Baking soda can be used to clear blackheads and acne annoying. The way is also very easy just by mixing baking soda with water, and stir until blended. After that, apply evenly to the skin that has been cleaned. Let stand for 2 minutes, then rinse with clean water

    Natural Mask To Remove Blackheads - 2

    That’s some way to make a mask to remove blackheads with natural ingredients. Hopefully this article can help to eliminate the problems companions stubborn blackheads.Hopefully the article Natural Masks To Remove Blackheads we provide today can be beneficial for you. Thank You.

    The Elder Scrolls Online – How To Logout Of Your Game Account, When Using The Steam Version Of TESO [Tutorial]

    Recently, I was getting back into playing The Elder Scrolls Online a bit – which I haven’t really played at all since the Beta Testing Phase of the game. I was also popping in to the Steam Forum for the game, helping out a few people and I ran into someone asking about ‘how to logout of the game’ – that is, how to Logout of their Account but not actually exit/quit the game itself. While this may seem easy with the Standalone/Web Version of TESO (you just click the “Back” link at the Character Selection screen, which takes you to the Login screen, with the Account information fields to fill in); with the Steam Version of TESO – when you have associated your Steam Account with TESO – this is not quite as easy, as hitting “Back” at the Character Selection merely takes you back to a screen that just says LOGIN, with no fields to fill in. An example of how this looks is just below:

    Example of what the Login Screen looks like,
    when a Steam Account is directly associated with a TESO Account
    (Click to see Full Size)

    So, I tried to figure out how to ‘logout of the game’ but not ‘logout of Steam’, as it were; being able to log out of TESO so that one could change to a different account if they wanted to (say, to let a family member login/play with their own account), but keep Steam and the game running, similar to what one could do when running the Standalone/Web version of the game…

    Normally, this can be done with games that utilize Game Clients (“Launchers”) by not starting up the Game Client, but instead going to the executable file for the game directly, running it to start the game up (which usually opens the game to a Login screen of some sort). In the case of the Steam Version of TESO, here are the steps I found to do this:

    • Open Steam
    • Right-Click on TESO in the Library and choose Properties
    • Click on the Local Files tab
    • Click on the Browse Local Files button to show the directory/folder of the game
    • Navigate into THE ELDER SCROLLS ONLINE > GAME > CLIENT folder
    • Double-Click on “eso64.exe” to launch the game (or “eso.exe” if running 32-bit Windows/Game)

    That’s it! Now you should be at the Login area that everyone with the Standalone/Web-sourced version of The Elder Scrolls Online sees: a screen with Data Fields that can be filled in with Account Information, to Login. An example of what it looks like, is below:

    Example of what the Steam Version of TESO’s Login Screen looks like,
    when launched directly from the Executable file,
    even though a Steam Account is associated with TESO
    (Click to see Full Size)

    I wanted to share this here, to help others that might run into this ‘problem’; wanting to ‘logout of their TESO game account’ or ‘change TESO game accounts’, while using a Steam Version of the game. While associating your Steam Account with your Elder Scrolls Online Account is somewhat convenient (as you don’t have to type in your login information every time you start the game), hopefully this will assist with the issue that does arise then, when one wants to just Logout of the game and/or Login with a different TESO Account.

    I hope that helps – and See You In The Game!

    Health Benefits of Raw Sapodilla Fruit

    HEALTH BENEFITS OF RAW SAPODILLA FRUIT

    Health Benefits of Raw Sapodilla Fruit – Sapodilla fruit ripe has frequently we eat and has a sweet and tasty on the tongue, but have you ever you feel the sapodilla fruit still raw and half cooked. Raw sapodilla fruit flavors have mingled bitter sweet and would make for the consume gummy mouth.
    But so, sapodilla fruit raw to have efficacy as well as the benefits for the health of the body, because the content of vitamins and anti-oxidants in raw amber is very much beneficial for the body to be away from the body of free radicals that often affects the skin of the body.
    For those of you who do not want to consume Raw sapodilla fruit, here we will provide information on the benefits Raw sapodilla fruit for health, hope to be an inspiration and encouragement for you to consume the sapodilla fruit.
    Health Benefits of Raw Sapodilla Fruit - 1
    Benefits of Raw Fruits for Health
    1. Can Overcome Diarrhea Naturally
    Benefits of sapodilla fruit raw to health is a drug, diarrhea or loose stools are very powerful. High fiber content in the raw sapodilla fruit is very good in addressing the problem of diarrhea.
    How to apply the sapodilla fruit for diarrhea medicine there are two kinds :
    Method 1: Take a Raw sapodilla fruit is still fresh and peeled skin, and scar the flesh as well as brewed with warm water to one cup, let stand for 10 minutes and drink the water until they run out, do this way for 2 times a day.
    Method 2: Take the sapodilla fruit, half-cooked or Raw, and remove the skin, remove seeds also give a little warm water and also give 2 tablespoons of honey. Drinking Raw sapodilla juice twice a day.
    Health Benefits of Raw Sapodilla Fruit - 2
    2. Can Treat Dysentery
    Benefits of sapodilla fruit raw to the next health is to treat dysentery. Dysentery can be cured by eating raw sapodilla fruit. Take some sapodilla fruit peeled raw and coolies, chew the flesh as he added a little salt on the fruit, eat little by little until the end of sapodilla fruit. Apply 2 times a day until you disappear dysentery and cured.
    3. Can Treating Inflammation of the Mouth
    Benefits of sapodilla fruit raw to health can also be a natural cure inflammation of the mouth. The trick is to take the sapodilla fruit and splitting it into several parts (after peeling).and sapodilla fruit that has been cut is boiled with 1 cup of water until the water changes color. Wear this sapodilla fruit boiled water to rinse. Do it until the water runs out, do it twice a day until the inflammation of the mouth healed.
    Thus some of the benefits of raw sapodilla fruit for a healthy body. Hopefully with this short article can add to our knowledge of traditional medicine wear natural fabrics such as sapodilla fruit. Hopefully this article Health Benefits of Raw Sapodilla Fruit that we share today can be beneficial for you. Thank You.

    Proven Ways to Avoid Holiday Weight Gain

    As we head into the holidays most Americans will gain between 8 and 12lbs between Halloween and New Year’s Day.  However, there are ways to avoid this weight gain!
    Here are some key tips:
    Eat before you drink and celebrate and before holiday parties.     Going into a holiday party on empty and hungry is a sure-fire way to overeat.    Alcohol intake boosts appetite to begin with and if you start out without anything in the tank it just gets worse!    This does not mean overeating – eat a sensible meal about 2 hours before you go to the party.
    Try to choose higher protein foods first because protein helps with satiety (feeling satisfied and not hungry).
    Fill up on Fiber Rich Foods – which also help with satiety and help create a feeling of fullness when consumed with water.  Focus on the raw veggies and yes you can dip them in some dip that has some fat because together fiber and fat can really assist in managing hunger along with protein.
    Eat some fat – that’s right eat some fat!   Fats also are key for satiety.   That being said a little goes a long way!
    Bring your own food to a party.   Rather than having only high calorie, high sugar and high fat foods bring something you enjoy that is also healthy along with you!
    Eat slowly and chew your food thoroughly – seems simple and it is.    It is also VERY effective for limiting food intake!
    Use smaller plates, bowls and glasses – all of which help to slow down food and beverage intake and make you more conscious of how much you are consuming!
    Try to Minimize Sugar and Starch Intake – both sugar and starch wind up as glucose (blood sugar) and high intake drives insulin which results in rebound hunger.      High sugar and starch intake increases hunger – particularly when drinking alcohol because alcohol acts like a super sugar and also drives insulin response.
    Pause before getting seconds – as with slower eating and deliberately chewing food this can give your body time to realize it is no longer really hungry.
    If you are doing the entertaining have extra containers you are ready to give away so guests can leave with some of the extra food!

    Try not to eat in front of the T.V. which distracts you from how you feel and results in mindless eating!
    Consider planning a cheat meal but have a plan for how much you are going to eat!   One meal can knock you off course but most of the holiday weight gain comes from completely giving up on healthy eating for many meals.   Planning one cheat meal every week and planning on eating a set amount of the foods you may be craving can work for many people rather than mindlessly eating.      If you plan your meal including your portions of alcohol, sweets, fat and sugar you can limit the damage and still have a great time!
    Drink Water.   Often quoted and still true – water is the best beverage and avoiding sugar laden drinks in favor of still or sparkling water can make a big difference in minimizing holiday weight gain.
    Workout!   Working out improves mental outlook and burns some calories while reducing stress levels!    When we are stressed we overeat!   Just 10 minutes a day can make a big difference!

    Get Your Sleep.   Lack of sleep is terrible for your health and particularly bad for driving appetite and overeating.   Lack of sleep causes hunger and excessive eating because the normal feedback mechanisms that tell you that you are full do not work properly when you are tired.   Basically, a tired brain tells you to eat to feel better and it is VERY hard to resist these urges when tired!

    My trip to Yapahuwa

    I just completed an assignment for an international networked organization. They are in the process of establishing and sustaining a national level sister organization with district level branches which will belong to the same network.

    The assignment was to critically look at the activities undertaken to sustain the district level branches. Well basically looking at the resource mobilization of each branch.

    When considering resource mobilization for the development sector one automatically recalls the telethons and other fundraising activities done by charities to raise millions of dollars; quite similar to the ones that are going on for the Haiti earthquake relief operations.

    However resource mobilization in the 3rd world is quite a different matter. It is fundamentally handicapped due to the following reasons.

    1. Most INGOs and Local NGOs operate in the 3rd world as project implementers. Therefore their articles of association / constitutions do not provide for resource mobilization (self generated / self raised funds).
    2. Due to above most states (in Asia) do not recognize them as registered charities that qualify for fund raising which is tax exempt.
    3. They are only allowed to receive funds from donors who already have funds or who have access to funds. Generally these funds when received in the implementing country are exempted from income tax.
    4. In fact, the local legislations which facilitate the registration of these entities for legal purposes themselves disallow any kind of activity which earns an income for the organization.

    So, in order for an organization (NGO) to be legally able to engage in resource mobilization they have to:

    1. Ensure that the articles of association / constitutions that they operate under provides for such activities.

    2. Get the governments to recognize them as charities (this is generally done by conforming to already existing legislation or you would need an act of parliament or for parliament to pass new legislation to facilitate this).

    3. Once you are registered as a charity that qualify for fund raising which is tax free you can look at the spectrum of resource mobilization activities which are at your disposal.

    Fund raising activities in general falls in to the following broad categories.

    1. Cause / Issue based (HIV/AIDS, TB, Child Labour, etc.).
    2. Event based (Tsunami, War, Earthquake, etc.).
    3. Faith based donations to religiously affiliated organizations
    4. Bi-lateral funds.
    5. Multi-lateral funds

    There is however another resource mobilization strategy which is “Income Generation Projects” which is: an organization (NGO) can engage in commercial activities such as training, providing a chargeable service, renting of assets, producing some products etc. to generate a profit. This profit is then used for development activities.

    If an organization (NGO) wants to use this strategy they need to ensure that the articles of association / constitutions as well as the legislation / act of parliament clearly addresses’ this activity. Otherwise an organization may become liable for income tax. This risk may jeopardize the sustainability of the organization; therefore careful consideration must be given to the legal landscape before engaging in such activities.

    However my client has started several “Income Generation Projects” without considering the above. There is a huge risk associated with this and no remedial action is being taken.

    As for the income generation projects, they seem to have been started based on good ideas and not based on the profit they can earn to sustain a development project or a part of a project. Further they are being executed by the same staff taken to deliver development services (who by the way have no business skills) to the target groups; needless to say that the “Income Generation Projects” are doing poorly. They are hardly making profits some are making huge losses. In some cases, not only are they making losses, but they have very high turnovers which go beyond the value added tax threshold (VAT). This is a huge risk for the organization.

    The assignment was well received by the client and they have already engaged me for a follow up assignment to develop realistic business plans for the “Income Generation Projects”.

    Yapahuwa is a historic / archaeological town which boasts the second rock fortress of Sri Lankan kings. It is close to many not so famous archaeological sites and now boasts a new hotel – Yapahuwa Paradise. I recommend a visit to Yapahuwa if ever you are in the north west of Sri Lanka.

    INSPIRING IDEAS FOR SMALL APARTMENT

    INSPIRING IDEAS FOR SMALL APARTMENT

    INSPIRING IDEAS FOR SMALL APARTMENT

    Here is a two room apartment (60 m²) with lots of inspiring. We think some of them could really help when you’re planning to decorate a similar trough. This two bedroom apartment is located in Sweden, and align themselves with modern elements with classic and even vintage. The lounge is equipped with a generous sofa, TV cabinet and a reading corner. With a little wooden additions, fireplace and oak flooring classic, it betrays a worm feel. Just next door, slightly raised, there is a beautiful fully equipped kitchen. worktop oak gives a uniform appearance and a pleasant contrast with the matte white tiles lining the wall to the attic. The room also has a fireplace gives the interior a very pleasant atmosphere.

    INSPIRING KITCHEN IDEAS FOR SMALL APARTMENT

    INSPIRING KITCHEN IDEAS FOR SMALL APARTMENT

    INSPIRING BATHROOM IDEAS FOR SMALL APARTMENT

    INSPIRING BATHROOM IDEAS FOR SMALL APARTMENT

    INSPIRING BEDROOM IDEAS FOR SMALL APARTMENT

    INSPIRING BEDROOM IDEAS FOR SMALL APARTMENT

    INSPIRING IDEAS FOR SMALL APARTMENT DESIGN

    INSPIRING IDEAS FOR SMALL APARTMENT DESIGN

    Basil Magical Benefits For Health Body

    BASIL MAGICAL BENEFITS FOR HEALTH BODY

    Basil Magical Benefits For Health Body miraculous benefits for body health basil, Basil has a Latin name Ocimum basilicum which means scented plants. It refers to a distinctive aroma that comes out of the basil leaves. In Indonesia alone basil is more often used as
    complement different types of cuisines to add aroma appetizing. One of them is steamed.
    However, apart from being used as seasoning basil leaves is also beneficial to health. This is not out of the compounds contained therein.
    Basil Magical Benefits For Health Body
    Health Benefits of Basil’s
    Well, below are some health benefits of basil leaves for both men and women.
    1. Relieve fever and colds
    Basil leaves can relieve fever and colds suffered by a toddler. The trick Take a few leaves of basil, then kneaded together with the onion and coconut oil, then applied to the abdomen, chest, and back toddlers.
    2. Healthy eyes and mouth
    Vitamin A in the basil leaves have the ability to treat eye infections, relieve eye stress, and prevent interference with the other eye. Not only that, in addition to mint, basil also has a refreshing effect of bad breath if consumed.
    3. Smooth Breast Milk
    Fresh basil leaves is believed to prevent body odor and bad breath, as well as facilitate breastfeeding. You can use as a salad friend to eat rice and sauce.
    4. Anti-inflammatory
    Basil is an anti-inflammatory agent to treat an effective swelling and relieve arthritis. Basil also include good sources of calcium necessary bones to prevent osteoporosis.
    5. Menopause
    Basil delay menopause because it contains tryptophan substance on basil leaves can delay menopause. Therefore, multiply the consumption was basil if you want to postpone the mass of menopause.
    6. Preventing a cough
    In Thailand, basil is used as seasoning. In India and parts of Africa, basil leaves brewed into tea. Basil tea served at the turn of the season, when local people susceptible to coughs, colds, or fevers.
    7. Overcoming Whitish
    The content of the compound eugenol in basil can kill the fungi that cause vaginal discharge. So, when you experience vaginal discharge, diligent consuming basil leaves. can be as a salad or mixed with other foods, such as steamed.
    8. Stimulate Egg
    Basil leaves can help the process of maturation of the egg (ovulation) for substances stigmaasterol in the basil stimulates the maturation of the egg (ovulation).
    9. The anti-inflammatory
    Substances cineole, myrcene and eugenol contained in basil leaves function as a natural antibiotic and anti-inflammatory.
    10. Heart Health
    Based on several studies, basil role in maintaining heart health because it contains beta-carotene, and magnesium. Both are important mineral that serves to keep and maintain a healthy heart.
    11. Overcoming Stroke
    Improves the function of blood vessel artery (artery) in patients with stroke due to the isoflavone content basil and also found in nuts such as soy, beans, peas, can improve blood vessel function artery (artery) in stroke patients.
    12. Other benefits
    The smoker can chew basil leaves whenever they want to smoke. Thus, the antioxidant power is able to fix a broken system from the effects of nicotine. Basil is also effective to relieve stress, prevent diabetes, and cope with kidney stones.
    Basil Magical Benefits For Health Body
    The content of Basil
    Basil leaves contain nutritional components and non-nutrient components that are beneficial for the body.
    Nutritional Components Basil :
    Basil leaves contain beta-carotene (pro vitamin A) and vitamin C. Beta-carotene act to support visual function, improve antibody responses (affect immune function), protein synthesis to support the growth process, and as an antioxidant.
    Vitamin C, among others, are useful for the formation of collagen for wound healing and maintain skin elasticity, helps absorption of calcium and iron, antioxidants, preventing the formation of nitrosamines which are carcinogenic (cancer causing).
    Collagen is a protein compound that affects the integrity of the cell structure in all connective tissues, such as cartilage, bone matrix, tooth dentin, capillary membranes, skin, and tendons (tendons). Basil leaves are rich in macro minerals, namely calcium, phosphorus, and magnesium. Calcium is important for the formation and growth of bone, nerve impulse transmission, muscle contraction helps, and helps activate the enzyme reaction.
    Phosphorus plays a role in bone growth, helps the absorption and transport of nutrients, regulate the balance of acids and bases. Magnesium helps relax the heart and blood vessels, thus improving blood flow.
    Components Non Nutrition Basil :
    Basil leaves also contain components nongizi include flavonoids and eugenol, arginine, anetol, boron, and essential oil. And eugenol flavonoids act as antioxidants, which can neutralize free radicals, neutralize cholesterol and are anticancer.
    The compounds may also be antimicrobial that prevents the entry of bacteria, viruses, or fungi that harm the body. Very nice basil leaf consumed by women because eugenolnya can kill the fungi that cause vaginal discharge.
    The content of arginine can only strengthen the endurance of sperm and prevent infertility. Anetol and boron compounds are also very instrumental in keeping the male and female reproductive health.
    Anetol and boron can stimulate the hormones estrogen and androgen, and prevent bone loss. Estrogen and androgen hormones play a role in the female reproductive system.
    Essential oils are volatile and have biological activity as antimicrobial. Essential oils are divided into two components, namely the component hydrocarbons and oxygenated hydrocarbons or phenol component. Phenol has a very strong antimicrobial properties.
    Essential oils can prevent the growth of disease-causing microbes, such as Staphylococcus aureus, Salmonella enteritidis, and Escherichia coli. Essential oils can also ward off infections caused by viruses Basillus subtilis, Salmonella paratyphi, and Proteus vulgaris.

    Eugenolnya can kill the fungi that cause vaginal discharge. And stigmasterol can stimulate ovulation (egg maturation). Tannin and tin components can reduce the secretion of vaginal fluid, while the amino acid tryptophan can delay menopause. Flavonoid components such as orientin and vicenin on basil leaves can protect cell structures. Meanwhile, the flavonoid components such as cineole, myrcene and eugenol useful as a natural antibiotic and anti-inflammatory.

    Paperless Mission #9: Setting Up Your Class with Evernote

    This is the ninth installment in my Go Paperless! Challenge Series. You can check out the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

    Mission #9: Set Up Your Class with Evernote

    Today’s mission assumes that your class has easy access to technology. I teach in a 1:1 iPad setting, but I realize how blessed I am to have this and how few people — especially at the elementary level — get to do this. For those of you who have less access to classroom technology, I’m including modifications that you’ll be able to use at the end of the article.

    It’s been a couple months since I started drinking the Evernote Kool-Aid, and I’m still loving it. I don’t have to worry about losing papers or information, and it has become my repository for just about everything. For the first time in my professional live, I feel like I’m getting a handle on organization. But then I see this:

    And I’m reminded that just because I’m organized, doesn’t mean that my students are. In fact, all year long my fourth graders have been struggling with keeping track of class notes, transporting work between home and school, and remembering what materials to use to study for tests and quizzes. Part of that unquestionably comes with the age and maturity levels of 10-year-olds, but given how awesome technology has become, I knew there had to be a better way.

    Enter student Evernote accounts. My students used Evernote on their iPads for the last 6 weeks of school, and I’ve been very pleased with the results. Here’s how we set it up.

    Step #1: Register for new Evernote accounts.

    This step can be done on either a computer or an iPad. (My pics will show the iPad view.) Students will need to have an email address in order to complete registration, but this can be tricky with students who are under the age of 13 since many of the students don’t have email yet. One work around that we found was to set up a class email address on Gmail (ex: [email protected]). Then, you can add the “+”symbol to the end of the username along with a string of letters and/or numbers before the “@gmail.com” ending. Evernote thinks all of these are different addresses, but Gmail doesn’t pay attention to anything after the “+” symbol, so everything will go back to the “fakeeberopolis” account. This lets students register without ever giving them an email address.

    I had students put their lunch account numbers after the plus symbol, but names or other number combinations would work too. You just have to have the info after the “+” symbol be unique to each student so Evernote doesn’t think they’ve already registered. 

    I let the students choose their own usernames and passwords, and I had them record those in a safe place so they could share them with parents. Next year, I’m likely to collect the information as well so I can easily help the students recover it. They don’t sign in and out of Evernote usually — they just stay logged in, so many of them forget.

    Step #2: Build Notebooks for the Subject Areas

    My students created notebooks for Reading, Writing, Word Study, Math, Science, and Social Studies. They later added notebooks for their Spanish and Music classes. During the set-up phase, we talked about the differences between notebooks and notes and how to move notes from one notebook to another. Next year, when I start this from the beginning of the year, we’ll also talk a lot about tagging notes to make them easier to find.
     

    Why Student Evernote Notebooks Rock

    1. More instructional time because transitions are so easy. Transitions between subjects used to take us forever because students would forget to grab a notebook or not have all the materials ready on time. Now transitions are just a quick stretch or brain break. They have all of their notes right in front of them already. We’re abandoning the cluttered bins and drawers.

    2. Students are more accountable and prepared. We don’t have to worry about forgetting work at home or getting lost between home and school. It’s all in one place. In addition, students are able to create more comprehensive class notes. If we read an article using GoodReader, students can save it to their Evernote notebook. If we develop an anchor chart as a class, students can take a picture of it and add it to their notes to refer back to long after it’s gone from the classroom display. If they make a model of different types of triangles using toothpicks, they can photograph their work and add in captions later. More learning gets archived than we’d ever accomplish with a paper model.

    3. Everything is portable between home and school. Students don’t get to take their iPads home, but as long as they save their work in Evernote, they can access it from any computer or mobile device. It also means that students aren’t leaving important readings or materials at school when they need to study for a test. I’ve had many frustrated parents complain that their child wasn’t bringing home the right materials to review for tests this year — especially because we don’t use traditional textbooks at my school — and this remedies all of that.

    Another portability example is that I’ve also had students use Evernote as a word processor when they’re working on longer writing assignments because they can pick up their work between home and school. (In the future, I’d like to use Google Drive as their word processor, but until we get there as a school, this is an acceptable alternative.) Once students are ready to turn in a finished piece of writing, they copy and paste it into Pages, clean up the formatting, and turn it in through Edmodo. It has worked brilliantly this term, and I’m seeing much longer, more developed pieces of writing at all stages of the writing process now. I really think the ease of this process has played a role.

    Now that we’re using Evernote regularly in the classroom, I can’t imagine ever going back. While I will miss the massive influx of office supplies (composition books, notebooks, etc) at the start of the next school year, I’m falling in love with the fact that the only things I take home with me each night are my laptop and iPad. Going paperless has been a glorious thing.

    What are some ways you could use Evernote with your students? I’d love to hear about it in the comments section!

    Popcorn Cart, Warren, Ohio, circa early 1910s

    https://www.facebook.com/neatoldphotos.m.lucas2/photos/a.400823796751664.1073741829.400758923424818/908779272622778/?type=3

    WTH ? How do both front tires blow up simultaneously?

    for the original version, click though on the video below, which will only play on youtube itself

    After a review, the team discovered a suspension arm defect led to the entire right front upright collapse, which snapped the wheel tethers and created the dramatic effect

    Here’s a cool old air conditioning system from a Lincoln I didn’t get exterior photos of

    similar to the system I saw in a Packard, possibly due to this late 50s Lincoln getting input from former Packard president James Nance who landed at Ford Lincoln Mercury after Packard shut down in 1956, the cold air is pumped up the tubes

    through ducting above the headliner

    to vents above the backseat, and the front seats

    How to Organize your Summer Reading

    Summer is the perfect time for me to make some progress on the massive stack of books that I accumulate throughout the year. You know that stack — and if you’re like me, that stack may have spawned offspring and multiplied into several stacks around the house. And given the number of summer book studies I keep reading about, I know the stack will continue to grow. Like last week, when I saw that Misty was going to read Number Talks, and I had to get the book.

    Or this morning, when I read that Beth at Thinking of Teaching and Brenda at Primary Inspired are hosting a summer book study of Building Mathematical Comprehension: Using Literacy Strategies to Make Meaning by Laney Simmons. I want to read that, too!

    With all that I’m currently reading, want to read, and have finished reading, I needed a way to keep track of all these awesome books. Then I remembered GoodReads (this is very distinct from the GoodReader app that I’ve blogged about before).

    GoodReads is a social media site focused on reading. I first started using it in 2010 after I finished reading The Book Whisperer by Donalyn Miller (if you haven’t read this book, it is a must-read).

    She referenced the site in the book, and I used it through my computer for quite a while. Eventually, as I got busier, I started using it less. I recently got an email update about a friend who was using it, however, and it reminded me that I should revisit the site. My how GoodReads has improved since I used it last! First, GoodReads has mobile apps now to help you keep your reading interests up-to-date.

    Now, I’m not such a bibliophile that I need to give status updates of what I’m reading non-stop. But these mobile apps have a fabulous feature that I love: a scanner. (Here’s the view of the app from my iPad. The iPhone version is very similar.)

    The scanner allows you to scan the barcode on books and then add it to a virtual shelf. Your GoodReads account has 3 default shelves: read, currently reading, and to-read. Shelves are like tags, and you can create your own shelves based on topics or any other organization you’d like. Books can also be housed on multiple shelves at once.

    I love using the scan feature to quickly organize the books that I’m reading or plan to read. Given the iPhone app, it’s also a dangerous helpful feature when I go to bookstores and see books that I’d like to read someday. I just scan them in, and it pulls all sorts of data for me about reviews of the book, average rating of the book, page count, etc. For eBooks I’ve purchased that don’t have a scannable barcode, I can also search by title or author.

    In addition to using this to manage my summer reading, I expect to use this app more in my classroom library to inventory my collection, identify books that I’ve read or want to read, write recommendations for my students, and so on.

    If you decide to give GoodReads a try, feel free to connect with me there. I’d love to connect with other teachers to see what others are reading.

    What are some books that you’re planning to read this summer? Any other ideas for ways to use this app? I’d love to hear your ideas in the comments section, and I hope to connect with you on GoodReads!

    Happy summer reading!

    My trip to Australia, Adelaide & Melbourne

    The trip to Australia has many connotations, projects, jobs, fun etc. I started my journey (with my wife) without any expectations and reached my transit point of Singapore with relative comfort and uneventful. On the leg between Singapore and Adelaide we were unlucky to be seated next to a person who was clearly suffering from the flue, coughing and sneezing. When will the airlines seat such passengers in a different area of the flight? I wonder if I live to see such care by an airline; anyway reached Adelaide with the knowledge that, we have a high probability of getting the flue or at least a cold.

    Australians are very strict in terms of anything you bring into Australia so being my first trip down under I din not anticipate the ques, baggage scanning and physical inspection for any food items etc. Man it just not worth the hassle to take anything to Australia. We reached out hotel (Granada Motor Inn) in the morning and had to wait for a while till our room was ready. It was a comfortable hand had a decent air conditioner coz the outside temperature was around 42 C. In the evening we went for a quick tour of Adelaide and had dinner at an award winning Korean restaurant. Dining in Australia is also a big thing.

    The next day we went to an area north of Adelaide (Playford North) where a new federal government led development was being rolled out. Needless to say there are employment opportunities and project opportunities there. We met the people and had a look around to see if it was to our liking.

    Between the 31st of January and the 3rd of February we were in Adelaide and had a good look around Adelaide. We ventured out alone on several occasions and found the public transport (Busses) to be the most economical mode of transport. On the 4th of February we took a tiger airways flight to Avalon / Melbourne were a friend of my wife picked us up. We went straight to the Crown Casino to have lunch. You can be fooled when you are at Crown Casino thinking you are in Hong Kong or China as 90% of the punters are of Chinese origin.

    After Lunch we went to the river bank / pier where there was a street carnival on account of the Chinese New Year of the Rabbit. It was great to observe how clean the street carnival was. Guess the minute emigrants from this part of the world go to Australia they become model citizens. Wonder what makes them behave like animals (my apologies to all animals) when they are in their own country?

    In the evening we went to a nearby forest reserve to see some wild Kangaroos and were treated by some good sightings. On the way back to our friends place we went to a drive in liquor store which was unique for me. I hope that they would bring this concept to Colombo.

    We had a BBQ for dinner (yes I had Kangaroo stakes) and had a great time with our friends. The next day we had to head back to Adelaide so; In the Morning We went to our friend’s restaurant for breakfast ZEST 89 and drove to Avalon to get back to Adelaide. I recommend anyone who visits Melbourne to at least have one meal at the ZEST 89 restaurant it is a great place.

    We reached Adelaide by mid afternoon. We then took the Mount Lofty Scenic Route and went to Cleland Park for the afternoon to see the other wild life in a park environment. Cleland Park was an education. There I was able to see the famous “black swan” in real life. It is a truly remarkable astonishing site even though you have heard about it seeing one in real life was beautiful.

    We stayed in Adelaide until the 8th and took the flight back to Singapore. In Singapore we had arranged to meet some of our good friends for dinner. The immigration officers at Changi Air Port were a bit amused that we went out for 3 Hours. Anyway we returned to Colombo without incident and I am certain we will be going back to Australia in the near future.

    Given the position of all the Asian countries and their role in the post financial crisis global economy Australia is a very attractive prospect vis-à-vis US and Europe.

    The Game Tips And More Blog Presents: The Elder Scrolls Online Beta Key Giveaway (Final Beta Weekend)

    This upcoming weekend is the last weekend for The Elder Scrolls Online Beta!
    To celebrate – and to allow one more TES fan get in on the action, I am giving away one fresh, crisp TESO Beta Key – completely free! All you have to do is send me an email (gametipsandmore_at_gmail_dot_com) or leave a comment below, telling me a favorite memory of yours from a previous Elder Scrolls game. If you haven’t played any of the previous TES series at all, just tell me something you are hoping to do in the new Elder Scrolls Online and I’ll randomly pick one lucky email out of the batch and send you your very own, unused and direct from Bethesda, Elder Scrolls Online Beta Key!

    The final weekend of the beta will run from Friday, March 14th at 12:00PM EDT until
    Sunday, March 16th at 11:59PM EDT. The winner will be notified via email before that time.
    Have fun reminiscing (or looking ahead), good luck to you… and See You In the Game!

    MODERN LIVING ROOM DESIGN FROM TUMIDEI

    This is not the first post in furniture modern living room ideas. If you look at the end of this post, you can see the space for living ideas that we posted in the past. Today I wanted to add a new article with some new inspirations for the exhibition of the company’s Italian design furniture Tumidei, offering fantastic options for your living room. clean lines add a sense of serenity and calm to the furniture in beige, brown and black. Simple and elegant, furniture Tumidei lot about your style and preferences. Add to that a carpet of bright color or a lamp and the room comes alive with its own personality.

    DESIGN MODERN LIVING ROOM FROM TUMIDEI

    DESIGN MODERN LIVING ROOM FROM TUMIDEI

    MODERN LIVING ROOM FROM TUMIDEI

    MODERN LIVING ROOM FROM TUMIDEI

    MODERN LIVING ROOM STYLE FROM TUMIDEI

    MODERN LIVING ROOM STYLE FROM TUMIDEI

    MODERN LIVING ROOM DECOR FROM TUMIDEI

    MODERN LIVING ROOM DECOR FROM TUMIDEI

    MODERN LIVING ROOM DESIGN FROM TUMIDEI

    MODERN LIVING ROOM DESIGN FROM TUMIDEI

    Benefits of Apples for Health

    BENEFITS OF APPLES FOR HEALTH

    Benefits of Apples for Health – Apples (Malicus domestica) is a fruit plant which has a sweet taste with a lot of water content to give freshness as it passes through the throat. No fruit skin is red, green and yellow depending on the type of apple itself. Apple comes from the apple tree which according to some experts is the first to be plant crops, fruits of its improved through selection over thousands of years.
    The apple is a fruit that grows well in areas with a cold climate, but the Central Asian countries that are first planted apple tree, so it could also be said that this fruit (also) growth in the lush tropical region.
    No wonder all the love apple, fruit flesh hard when bitten will be spending a lot of water. Most people eat apples when raw (not cooked) and the experts recommend it. Various types of processed apples are cooked apple sauce by cooking the fruit until soft, but it is also often made into apple juice (juice).
    Benefits of Apples For Health - 1
    Nutrients and Minerals In Apple
    The apple contains many vitamins and minerals that are all working together to give the best contribution to the system of the human body to be healthy and well protected.
    Apples contain flavonoids, polyphenols and vitamin C which act as antioxidants to protect the body from bacteria and viruses that threaten health. The content of beta-carotene (Vitamin A) in it can fight cancer cells and lowering cholesterol. There is also a derivative of vitamin B complex such as thiamine, riboflavin and pyridoxine to ensuring the efficacy of the apple.
    Benefits of Apples
    1. Prevent Cancer
    Apples are as anticancer certainly very effective way to protect the body from cancer cells.
    Scientists from the American Association for Cancer Research have agreed to give a statement that the consumption of flavonoids in apples stored many may help reduce the risk of pancreatic cancer reached 23 percent.
    In the apple skin also contained compounds called triterpenoids which complement the performance of each flavoanoid to prevent the growth of cancer cells, this potential has been identified by researchers from Cornell University. Therefore when about consumption of apples, do not remove the skin because that section also provides health benefits.
    Because apples are also rich in fiber (about 4 grams) in a medium size, colorectal cancer can be defeated fairly regularly eat this fruit each day.
    2. Lowering Cholesterol
    Apples are rich in soluble fiber which functions in competition with the fat in the intestine. Both nutrients are competing will result in decreased absorption of LDL (Low Density Lipoprotein) or the bad cholesterol and overstate production or absorption levels of HDL (high-density lipoprotein) or good cholesterol that our bodies need. Thus concludes by itself that apples can lower bad cholesterol and increase good cholesterol count.
    3. Boost Immune System
    Apples contain antioxidants known as flavonoids and quercetin, especially on apples with red skin. One of these antioxidants, quercetin exactly will boost the human immune system to build a natural shield of viruses that cause disease.
    Coupled with vitamin C and fiber that are as anti-inflammatory
    so the role of quercetin slightly alleviated by these two nutrients. Because of this many experts consider the apple as the fruit of a high immunity boosters.
    4. Prevent Alzheimer’s
    One cup of apple juice you drink when the weather is scorching can repair cellsnerves in the brain are damaged, thanks to the role of flavonoids as a powerful antioxidant. If this continues, the privilege apple will feel the body is protected from Alzheimer’s disease.
    5. Treat Asthma
    Respiratory problems caused by damage to the primary function of the lungs
    This has been suffering from a lot of people, because it is said to be a common disease of asthma.
    To reduce asthma symptoms and treat slowly, you can take advantage of the apple because of its phytochemical content and polyphenols help the body recover asthma.
    The researchers say that children who used to drink apple juice regularly each day showed a decrease in the risk of asthma attacks and other respiratory problems. It can thus be concluded that the apple is a fruit of the dreaded disease of childhood asthma.
    6. Controlling Blood Sugar
    Apple will help ward off free radicals of oxygen that has big potential cause diabetes. This is due to the high content of soluble fiber and pectin which has a role as controlling blood sugar levels in the body by transporting sugar into the bloodstream at a slower cycle.
    Women who every day eat at least one apple can reduce the chances of developing type 2 diabetes by 28 percent compared with those (women) who do not consume apples.
    7. Prevent Gallstones
    Gallstones are formed due to the bile store too much cholesterol that experienced hardening, it is synonymous in people who are overweight.
    To inhibit the formation of gallstones, doctors recommend that those who are obese to a diet high in fiber so that the levels of bad cholesterol to accumulate in the body is controlled. In controlling the body’s cholesterol, fiber pectin also contributed to reducing the absorption of LDL.
    8. Neutralize Irritable Bowel Syndrome
    Irritable Bowel Syndrome is a medical condition that is indicated by abdominal pain and cramping, as well as any changes in bowel patterns. Also closely against diarrhea and constipation.
    To control these symptoms, doctors recommend everyone to avoid milk and fatty foods and replace them with a high intake of fiber found in apples.
    9. Removing Toxins
    Food and drinks are consumed every day always leaving toxins in the liver which if allowed to accumulate will impair liver function, and even spread to affect other organs.
    One easy step you can do is eat fruits
    is high in vitamins, minerals and fiber such as apples to help detoxify toxins from your heart, if the poison is wiped you do not have to worry about diseases that may strike you as a result of damage to the liver.
    10. Prevent Cataracts
    In a study conducted recently (the long run) showed that people who have a habit of eating antioxidant-rich fruits such as apples can minimize the possibility of eye damage such as cataracts as much as 10 to 15 percent.
    11. Prevent Hemorrhoids
    Hemorrhoid disease caused by blood vessels that have swollen blood vessels due to excess pressure that weighed on the pelvic and rectal. Although hemorrhoids are not a deadly disease, pain that is presented can interfere with your daily life. To help relieve hemorrhoids you can eat high-fiber fruits such as apples.
    12. Lose Weight
    Apple is a fruit that contains a lot of fiber and low in calories can you make food to delay hunger. It has great potential to weight loss as fat in the body burned.
    13. Whiten Teeth
    Bite the apple flesh as scrub using a toothbrush and toothpaste, which makes apples more powerful than both the tools and materials to whiten the tooth because it helps increase the secretion of saliva in the mouth to prevent tooth decay.
    Apples are natural tooth brushes and pastes are also the secret white teeth doctors, so if you want to have white teeth shine like the doctors, so often to you eat an apple when a relaxing time.
    14. Prevent Skin Cancer
    Apples also help maintain skin health from the inside so to see the charm that radiates so amazing, one of his prowess is preventing skin cancer.
    Apples are a good source of vitamin A that according to doctors help reduce the risk of skin cancer. An apple a large size can meet the daily needs of vitamin A in men and women and 5% to 4%.
    Benefits of Apples For Health - 2
    15. Eliminating Eye Pouch
    Eyes are used to see objects too long without being given a short break can result arising bags under the eyes and dark circles around the eye region.
    If you are forced to stay up, before going to bed do a treatment with eye mask. Sliced apples and place above both eyes, make sure the petals are also covered. Or, you can mix 2 tablespoons cider musty with grated potatoes to cover the eye with a warm cloth litter. After that let your eyes in relaxation for 10 to 20 minutes, then rinse with warm water.
    16. Overcoming Acne skin, sagging and Greasy
    The mix of raw applesauce and apple cider vinegar applied to the face can overcome the problem of oily skin that trigger acne. Apples are also equalizes the pH level of the skin which lowers the level of oil production in the skin.
    To tighten the facial skin and the blood circulation to all layers of the skin you can apply apple cider vinegar on the face using a cotton round shaped like a ball. This treatment as well as toner.
    17. Lift The Dirt On The Skin
    Face (mainly) and other skin can not be separated by the dust of the road, your job as owner is to take care to keep them clean and healthy. Try to make a mask from apples that have been put in the fridge for an hour or more, then smeared on the skin all over the body, especially the face.
    18. Protecting The Skin From Sun
    Too often exposed to strong sunlight can cause skin burns, dry, dull even have peeling. Therefore, if you often work under exposure to the sun, smearing the body with a paste of apples that have been mixed with one teaspoon of glycerin and pulp and leave for 15 minutes can provide more protection against ultraviolet rays.
    19. Protect Scalp and Hair To Stay Healthy
    If you are faced with the problem of healthy hair, it looks like pieces of stale suitable as material for taking care of problems related treatments are like hair loss, dry head, dandruff and hair graying.
    In addition to apples hair care also accelerate the process of hair growth bald, discolor hair color and give the impression of a charming luster.
    Ingredients :
    • 2 medium-sized apples, or four medium sized apples, adjust the length of the hair.
    • 2 tablespoons of cider vinegar.
    • 1 teaspoon of lemon or lime juice.
    • 1 teaspoon of cornstarch.
    How to Make Natural Care Products :
    1. Shopping apples, remove the middle part, then the stomach until smooth in a bowl.
    2. Add 2 tablespoons of apple cider vinegar and lemon juice 1sdt / lime also 1 tablespoon cornstarch and stir well.
    3. Apply the paste mop of hair is dry, cover with a shower cap, wrap again with a towel, let stand for 30 minutes.
    4. If so, rinse hair with warm water, then wash your hair using shampoo.
    5. This treatment can you do once a week.
    You need to know also that the fiber content of Pyrus Malus stored in apples used as supplementary material in a variety of hair care products. Therefore, the fiber content is useful to clean the dirt from the scalp and hair and balance the pH levels in the hair.

    That’s a wide range of benefits of apples are good at maintaining the health of the body by consumption of raw or juice form as well as substance to treat skin smoothness by performing a ritual or treatment of materials made from apples. Hopefully this article Benefits of Apples for Health we share today can be beneficial for you. Thank You.

    Avocado Fruit Benefits For Health

    AVOCADO FRUIT BENEFITS FOR HEALTH

    Avocado Fruit Benefits For Health – The fruit is sometimes known by the name of fruit avocado or if in the Great Dictionary of Indonesian fruit is called by “Avokat”, and in Latin avocado was named Persea american, it is because of this one fruit is the fruit originating from the American continent, more precisely from Mexico and Central America and is now widely cultivated in South America and Central America as a crop monoculture and as garden plants in areas where other tropical world, including Indonesia which is now a lot of the cultivated fruit this one, this is certainly due to the potential that owned an avocado that is timeless, always got the high market demand especially for a restaurant or at home eating an avocado is usually always need this.
    Avocado Fruit Benefits For Health - 1
    myself included people who like fruit of this one, but if this one fruit juice made in, yup avocado juice is always to make people want to continue drinking until exhausted, are you with me in terms of consuming avocado juice? of course you can answer that yourself, hehe
    if we had lengthy talks about the avocado, then it is not complete if we do not discuss the properties of avocado fruit is, of course still a few people who wondered what the hell the benefits of the fruit of this one, all right we’ll discuss it here, please just see benefits below.
    Maintain and Improve the Health of the Heart Organ
    This is because, avocado contains a source of monounsaturated oleic acid, vitamin E, folate, potassium, phytosterols as well as an important source of fiber. All these nutrients play a major role on cardiovascular health are increasing.
    Complete Nutrition to the Skin
    This is because, avocados contain monounsaturated fats, omega-9 fatty acids, antioxidants, vitamin E, vitamin C and collagen. All of these nutrients help nourish your skin from time to time.
    Avocado Fruit Benefits For Health - 2
    Weight Control Service
    By eating an avocado will make the stomach is in a state of satiety is longer. Will also automatically suppress excessive appetite you have.
    Preventing Diabetes
    content of monounsaturated fats and potassium in avocados can improve the function of insulin and glucose levels in the blood neutralize you.
    Reduce Inflammation in Your Joints
    avocado contains monounsaturated fat, vitamin E, vitamin C and phytosterols that help reduce various types of inflammation in your body.
    Enhance Immune Function Or Immunity On Body
    This is because, the avocado is a source of vitamin C. Vitamin C will make one’s body is not susceptible to disease seasonal or unpredictable weather changes.
    Abatement Stroke Effective Enough
    This is because, avocado contains vitamin E which serves to lower the oxidation of cholesterol that will prevent someone exposed to the deadly stroke.

    Who would have thought behind it tastes good turns avocado also contains highly beneficial for the health of our bodies, now matter how beneficial fruits that are all around us, it would be useless if we can not utilize it as much as you, therefore make use of what is there around you as best as possible, hopefully article Avocado Fruit Benefits for Health can we share today, can be beneficial for you. Thank You.

    Tempura Mazel

    Tempura is a Japanese dish. Tidbits are dipped in a batter of flour, water, and egg yolk, sizzled to golden in hot fat (by all means, use your wok for this if you have one), drained, and artistically arranged and served, usually on a doily-lined flat basket. The consistency of the batter (which must be neither too thick nor too thin) and the temperature of the oil (350° is just right) are of the utmost importance. Tempura cannot wait; it must go directly from wok to table.

    Diet Start

    • 5 asparagus, cut into 2 or 3
      long diagonal pieces
    • 1-2 large carrots, sliced 1/4″ thick on diagonal
    • 10 green beans, ends trimmed
    • 2 small zucchini, cut into thick sticks
    • 1 bell pepper, cut into strips, pith and seeds removed
    • 6 shitake mushrooms, soaked in warm water
    • 6 large parsley sprigs, stems removed, dried
    • 4 Nori seaweed, cut into quarters (available in Japanese markets)

    Clean and cut vegetables; make certain they are dry.

    Batter:

    • Ice water
    • 21/4 cups flour
    • 3 egg yolks
    • 11/2 quarts safflower oil (more if using sauté pan)

    Gradually add ice water to flour with a whisk till mixture is the consistency of heavy cream. Beat yolks and whisk into mixture.

    Heat oil to 350° in wok or large sauté pan. Dip vegetables into batter and fry till golden (1-2 minutes). Do not crowd pan. Drain.

    Chilis Mazel

    • 6 fresh green chilis
    • 1 recipe Mazel Cheese Mexican, warmed
    • Ice water
    • 3/4 cup flour
    • 1 egg yolk
    • Safflower oil to deep fry (about 11/2 qts.)
    • 1 recipe of cooked Salsa Mazel

    Slit chilis lengthwise, just long enough to stuff with Mazel Cheese Mexican. Clean out seeds, etc. Stuff with Mazel Cheese mixture and set aside.

    Gently whisk enough ice water into flour to make it about the consistency of heavy cream. Beat yolk with a fork, then whisk into batter.

    Heat oil to 350°. Dip each chili into batter. Cook in oil till golden (1-2 minutes)

    Drain on paper towels.

    Served cooked salsa over chilis.

    YIELD: 2 servings.

    The timing on deep frying is difficult to pinpoint. Variables include size of pan, the amount of oil used, temperature of oil, desired color of finished product, etc. Do not crowd pan.

    EXOTIC CONCEPT HOME FULL COLOR VERY JUOOOOZZZZZZ

    Have you ever seen life, both in the apartment before? Usually, when it comes to so many colors, we have to overcome the enormous risk of visual confusion room. However, in this situation, it seems that everything is in place and atmosphere that inspired this apartment is the energy and extreme informality. Especially designed for young working couples, this house is a fusion of passions and interests. As their styles are very different and they wanted some of their own furniture to integrate into their new home, things were very difficult for designers.

    EXOTIC LIVING ROOM CONCEPT HOME FULL COLOR

    EXOTIC LIVING ROOM CONCEPT HOME FULL COLOR

    EXOTIC DINING ROOM CONCEPT HOME FULL COLOR

    EXOTIC DINING ROOM CONCEPT HOME FULL COLOR

    EXOTIC KITCHEN CONCEPT HOME FULL COLOR

    EXOTIC KITCHEN CONCEPT HOME FULL COLOR

    EXOTIC BATHROOM CONCEPT HOME FULL COLOR

    EXOTIC BATHROOM CONCEPT HOME FULL COLOR

    EXOTIC BEDROOM CONCEPT HOME FULL COLOR

    EXOTIC BEDROOM CONCEPT HOME FULL COLOR

    Tom Monaghan, founder of Dominos Pizza, and car collector had a lot of cars in his world

    The first Domino’s “Javelin” official delivery vehicle being delivered to Tom Monaghan in 1969.

    When Monaghan only had a few stores, he had red, white, and blue AMC Javelins for delivery cars.

    When he and his brother started out in pizza delivery, they had a beat up ’59 VW bug, and when his brother wanted out of the company/business/partnership… he got the car as a settlement

    His dad died when Tom was four, and his mom put the boys into foster homes that didn’t work out, then into a catholic nun orphanage. After 6 years she got her life together and thought she’d be able to care for her sons and found out, she wasn’t parent material, then committed the boys to juvie.

    In his teens, Monaghan had been a penniless car buff; then he joined the Marines, went into pizza after his discharge and dropping out of college, acquired a fleet of automobiles, including a handmade Bugatti Royale, the Type 41 1931 Bugatti Royale Berline De Voyage, and the Packard that conveyed F.D.R. to his second inauguration.

    Because he liked to fly, and get to meetings about franchisees faster, he bought a Gulfstream jet and a Sikorsky S-76 helicopter.

    He had at least 3 annual antique engine shows on Domino Farms, the event featured eighty-six exhibitors of steam and gas engines, related paraphernalia and other contraptions. Also featured were classic cars from the Domino’s Pizza collection, two steam launches including the Olde English ‘D’ owned by Domino’s and a steam powered boat called Steamer Telegraph, owned by the show’s chairman, Jim Monaghan.

     When his pizza franchises took off, he built a 244-car collection, bought the Detroit Tigers, and became the owner of the largest Frank Lloyd Wright collection in the world. He was worth 480 million.

    Eventually, he decided to sell everything. He got rid of his cars, yachts, planes, and baseball team, and in 1999, he sold Domino’s to Bain Capital.

    one of the cars in his collection was the Barris AMX 400

    another was a Model J Duesenberg he bought for a flat million

    http://www.hotrod.com/articles/ccrp-0705-amc-amx/
    http://mentalfloss.com/article/65604/11-facts-about-dominos-pizza-founder-tom-monaghan-30-minutes-or-less
    https://www.newyorker.com/magazine/2007/02/19/the-deliverer
    http://people.com/archive/tom-monaghan-vol-32-no-13/
    https://www.nytimes.com/1999/02/14/business/taking-the-gospel-to-the-rich.html
    https://www.hemmings.com/blog/2011/03/20/sia-flashback-million-dollar-duesy-harrahs-auctions-over-300-cars/
    https://www.farmcollector.com/steam-traction/dominos-farms-sponsors-third-annual-steam-engine-show

    How to Enjoy Alcoholic Beverages Without Getting Fat During the Holidays!

    The holidays are a time of celebration, and assuming you do NOT have a problem with alcohol and can drink responsibly, it is okay to imbibe!    The key to not getting fat from alcohol is to understand the calorie and carb content of alcoholic beverages and plan your intake ahead of time in terms of exactly what you chose to drink and how much you have.   

    All alcoholic beverages tend to drive insulin production so they are a big no, no for diabetics and other people taking certain medications.   ALWAYS check for drug and alcohol interactions before drinking any alcoholic beverage.
    It is also important to understand that in addition to the alcohol content itself alcoholic beverages are often full of sugar which further drives insulin and fat production.    The good news is that there ARE alcoholic beverages that are much lower in sugar/carb and calories.
    Champagne
    One of the best deals for a low carb holiday beverage is champagne!   Champagnes have the lowest carb and calorie content of any wine so are a great choice – particularly dryer champagnes.   A 4-ounce serving contains just 1.6 grams of carb and only 84 calories making Champagne the best choice for holiday cheer!
    Common White Wines
    After Champagnes the next best choice is white wines (NOT including ANY dessert wines!)
    Per 5 Ounce Serving Size:
    Chardonnay –   120 calories and 3.43 grams of carb
    Sauvignon Blanc – 120 calories and 3 grams of carb
    Reisling – 120 calories and 5.54 grams of carb
    Pinot Grigio – 122 calories and 3 grams of carb
    Common Red Wines
    Merlot – 118 calories and   grams of carb
    Cabernet Sauvignon – 130 calories and 3.82 grams of carb
    Burgundy – 122 calories and 5.46 grams of carb
    Pinot Noir – 116 calories and 4 grams of carb
    Shiraz – 116 calories and 3.79 grams of carb
     Low Carb Beers
    Bud Select 55 – 55 calories with only 1.9 grams of carb
    Miller64 – 64 calories with 2.4 grams of carb
    Michelob Ultra – 95 calories with 2.62 grams of carb
    Becks Premier Light – 64 Calories with 3.2 grams of carb
    Miller Light – 96 calories with 3.2 grams of carb
    Amstel Light – 95 calories with 5 grams of carb
    Coors Light – 102 calories with 5 grams of carb
    Bud Light – 110 calories with 6.6 grams of carb
    Mixed Drinks
    Liquor such as gin, vodka, scotch and rum, but are full of calories and to some extent act as a “super” carb driving insulin and hunger.    That being said they do not contain any carb whatsoever so as long as you mix them with no sugar/calorie mixers you can keep your carb and calorie intake somewhat under control.
    One of the best choices is Vodka and Soda Water with Lime or Lemon coming in with zero carbs and about 100 calories!   Other examples are whiskey and diet coke, Seagrams 7 and Diet 7-up, Rum and diet cola, or Spiced Rum and Diet Ginger Ale.
    What to avoid!
    Watch those mixers when it comes to mixed drinks – most standard mixers such as all sodas, fruit juices, and tonic are full of sugar unless you use the diet versions.    All your Caribbean and Tropical drinks such as Pina Coladas, Daquireis, Mai Tai’s, and Margaritas, etc are chock full of sugar and calories.
    Set a Budget for Your Intake!
    Set a budget on your intake of alcoholic beverages and actually keep track as you drink them making a point of knowing how much you have had each hour.     Remember each beer, glass of wine, and mixed drink takes one hour to process for the average male (and longer for females) so anything above 1 per hour is getting you inebriated at some level.   
    In addition to budgeting your intake drink a glass of non-alcoholic, no calorie beverage such as water or club soda for each drink/beer/glass of wine you have to slow yourself down and stay hydrated.
    If you want to catch a buzz drink your limit and switch to all non-alcoholic beverages for 2 – 4 hours before driving.     

    Even better – get a designated driver or use Uber or Lyft for travel to and from Holiday Parties!

    CONTEMPORARY LIVING ROOM STYLE DESIGN

    Your room is one of the most important room in the house, and most people spend much time in their room. A room is not only a space that welcomes you to relax and visitors, but also serves as a hub and serves as a showcase for the entire house. In simple terms, is the centerpiece of a home show and a place that will bring comfort and joy to all its inhabitants. Now we all know that when we have a guest room is usually the first room that your guests see, and I think we must be careful at this point is creating something that will reflect our own style. There are many decorating styles that you can choose and the most popular are traditional, country, contemporary and transitional provisions. Personally, I prefer the modern style, and for those of you who are looking for a little inspiration on contemporary works of living here are six images that can inspire you.

    CONTEMPORARY LIVING ROOM DESIGN

    CONTEMPORARY LIVING ROOM DESIGN

    CONTEMPORARY LIVING ROOM DESIGN

    CONTEMPORARY LIVING ROOM DESIGN

    CONTEMPORARY LIVING ROOM MODERN DESIGN

    CONTEMPORARY LIVING ROOM MODERN DESIGN

    CONTEMPORARY LIVING ROOM STYLE DESIGN

    CONTEMPORARY LIVING ROOM STYLE DESIGN

    Coffee and donuts video of the morning, consider the car… in movies

    WORKOUT ANYTIME on Entrepreneur

    WORKOUT ANYTIME on Entrepreneur

    WORKOUT ANYTIME Franchisee Chris Gately was recently featured in an article on Entrepreneur. The article titled, “Franchise Players: This Man Signed His Franchise Agreement While Serving in Baghdad” was in celebration of Memorial Day, Entrepreneur was profiling Veterans in Franchising. In this Q&A, Chris gives his insight to running a WORKOUT ANYTIME franchise.

    You can view the full article here. 

    Lola GT

    1923 Stanley model 740, seven passenger sedan

    and the fuel tank under the spare tire across the back of the car had two filler caps, one for gasolene, the other for kerosene. I’ve never come across that before

    Game Recording with MPEG-4: using H.264/AVC in Programs such as Dxtory, Bandicam and MSI’s Afterburner (Text-Only, Long Version)


    This article is a Text-Only version, showing how to use a few programs (one of them completely free) to utilize this efficient codec in game recording, using steps and settings that I personally found optimized performance and showing which ones slowed things down when recording. 
    For a video example of how to set the x264/AVC codec recordings to be editable in
    Sony’s Vegas or Adobe’s Premiere video editing applications, see my post about it here:
    http://gametipsandmore.blogspot.ca/2013/06/and-more-how-to-record-with.html

    The MPEG-4 video codec has been around for over a decade now. I remember recording TV shows to watch later on, on a system with an ATI All-In-Wonder videocard (back when videocards had only 8MB of VRAM!) and the joy of the changes I was seeing, going from compressing the shows in MPEG-2 format to MPEG-4 using either Quicktime or DivX (or it’s open-source competitor, XviD). Smaller file sizes and still decent quality? Awesome. Those were MPEG-4 Part 2 or ASP (Advanced Simple Profile) iterations of MPEG-4. Today, we are up to MPEG-4 Part 10 or AVC (Advanced Video Coding) and great times are to be had by all who record their video game adventures, as modern hardware and capturing apps allow not only for h.264/AVC to be used for video compression and archiving – it can also be used for small filesize ‘live’ game recordings and great retainment of detail, if desired.

    Dxtory, Bandicam and MSI Afterburner all provide the ability to utilize the various codecs installed on your system to record with (others do as well, I am merely choosing these more popular game recording apps as examples). To record with MPEG-4/h.264/AVC, it is simply a matter of installing that codec on your computer [if it isn’t already], then choosing it inside of whichever game recording app you prefer. The codec’s interface (GUI, Graphical User Interface) will allow you to change whatever settings you wish – but these settings will be quite different from what you may be used to, if you have done any h.264/AVC video compression in the past. Why?

    Because we are going to be balancing the settings – not just for retaining quality at a small file size (as you would like to when archiving a movie to keep on your computer) – but now also for recording speed. For instance, if we try to set things for high compression and attempt to keep detail at the same time (as we would for archiving a movie), it simply takes too long to process and compress the changes between frames ‘on-the-fly’ and save them into a file, when attempting to record game output. This would result in the game ‘lagging’ and dropping frames to try and keep up, as it falls behind dealing with analyzing and compressing and then writing the data, resulting in a video with ‘choppy’ playback as well. So, when recording our gameplay ‘live’, we must now consider the various settings and their affect on how fast we can put through the processing of frames and writing it to a file at the same time.

    I will be addressing most of the settings in the h.264/AVC codec, but not all of them. I will be concerned mainly with the ones that will slow down processing, so that things do not take too long and fall behind and cause ‘lag’, both in the game and the resulting video file itself. This differs from compressing for archiving our own movies, because instead of being only concerned with Quality (setting everything on ‘high’ and letting it take as long as it needs), we must now balance Speed of the compression as well, being now more concerned with each of these settings and how they can possibly slow things down when recording the ‘live’ game rendering. As is the nature of live recording, we want it to easily and quickly process the frames and save them to a file. I will explain how to do all of this.

    Recording with H.264/AVC

    “x.264” is a free/open-source utilization of the h.264/AVC codec (the XiWave GNU GPL MPEG-4 Codec). It is normally a command-line driven executable [when you run it, you type things in, to get it to do things], so what we want for game recording with these programs, is a version with an ‘interface’ so that we can just tell our apps what to do with the mouse and buttons/sliders and it translates it into commands for the codec. All we would have to do is choose a few settings and checkboxes (what most people are used to – a nice, easy, graphical user interface).


    Doing a search for ‘x264+windows’, there are a few places you can get the installer/setup program for x264 and Windows, here are the main ones:

    This is the “Official” Open-Source Video For Windows version of the x264 codec (Red Logo) at the time of this writing:
    http://sourceforge.net/projects/x264vfw/

    This official codec is what is covered in the “Easymode” sections of this article


    This is an “Unofficial” x264 Video For Windows Codec (Black Logo), at the time of this post, that allows for far more settings to be edited via checkboxes and pulldown menubars, but is more difficult to use (these two links are both the same thing):
    http://www.digital-digest.com/software/x264_VFW_Codec.html
    http://komisar.gin.by/index.html

    This unofficial codec is what is covered in the “Hardmode” sections of this article


    Basically, you can see that what we want is a “Video For Windows” version, which (thanks to all those great people that have worked on it over time!) has a nice, easy-to-use interface for picking the settings you want to use, without typing in a long line of commands every time. After installing the codec/interface into Windows, it’s just a matter of opening whatever game recording program you prefer and selecting it to use it.

    Here’s how to select it for usage in these three game recording programs:

    Recording with x264 and Bandicam

    • Once the codec is installed, run Bandicam and go to the Video tab and click on the Settings button
    • In here, under the Video category, next to Codec, click on the pull-down menu bar (with a little triangle at the end) and choose External Codec, which allows you to use other codecs installed in your system
    • Then, click on the three ellipsis (““) button and it will let you “Select external video codec”
    • Select the “x264vfw” H.264/MPEG-4 AVC codec from the list and click on the Configure button
    • This is the x264vfw configuration interface and in here are all the settings we will talk about next…

    Recording with x264 and Dxtory

    • Once everything is installed (Dxtory requires dotNET 4.0, a download link is on their main Download page), run Dxtory and click on the Movie settings button (which shows a little handy-cam with it’s lcd screen hanging out the side)
    • Under the Video Codec category, next to the word Codec, click the pull-down menu bar (with a little triangle at the end) and choose “x264vfw” H.264/MPEG-4 AVC Codec from the list and click on the little pen icon/button to the right, which opens the Configuration dialog box of the codec
    • This is the x264vfw configuration interface and in here are all the settings we will talk about next…

    Recording with x264 and MSI Afterburner

    • Once the codec is installed, run MSI Afterburner and click on the Settings button at the bottom 
    • In here, go to the Video Capture tab and under the Video Capture Properties category, click on the pull-down menu bar (with a little triangle at the end) and choose “VFW compression”, which allows you to use the other codecs installed in your system
    • Then, click on the three ellipsis (““) button and under Compressor, click on the pull-down menu bar (with the little black triangle at the end) and choose “x264vfw” H.264/AVC codec from the list and then click on the Configure button to the right
    • This is the x264vfw configuration interface and in here are all the settings we will talk about next…
    » Note:  To record with x264/h264/AVC and have it easily-importable and recognized properly in NLE’s (Non-Linear video Editing applications, such as Sony’s Vegas and Adobe’s Premiere lines of products [for example]) without having glitches or corruption or other problems, one setting for MPEG-4 codecs must be changed from the Default Setting right from the start. I created a video example of how to change this setting in Bandicam, Dxtory and MSI’s Afterburner and the post with that video can be found here at this blog:
    http://gametipsandmore.blogspot.ca/2013/06/and-more-how-to-record-with.html
    To understand some of the concepts and settings utilized by this codec (and helpful information to know for game recording and video compression in general), a quick word on Bitrate:

    [This section is highlighted in green headings for navigation, to assist you whether you are re-reading this article or you feel you know a lot about bitrate in video editing and wish to skip it]

    Bitrate (in Layman’s Terms)  /start

    When talking about game recording, bitrate is an expression of the amount of data we are using to create the recorded file [literally, how many bits of information we are using]. It is usually expressed as how much information per second we are telling the codec to use, to represent the frames that are getting pushed through, and save them to our output video file.
    The main thing to remember is that More Bitrate = Bigger Filesize

    For example, if we record using a 1MB per second (1MB/s) setting, then after 2 minutes of recording (120s), our recorded file size will be 120MB. At that bitrate, if we recorded for one hour straight (3600 seconds), our recorded file size will be 3600MB (3.6GB).
    If we record using a larger amount, let’s say 2MB per second (2MB/s), then after 2 minutes of recording (120s), our recorded file size will be 240MB. At that bitrate, if we recorded for one hour straight (3600 seconds), our recorded file size will be 7200MB (7.2GB).
    It’s that simple. The more bitrate we use, the bigger the recorded file will be. 

    For those used to video compression and editing, or even general users of multimedia, you may be more familiar with data rates in the realm of:

    MP3 (MPEG-3 audio) song bitrates such as: 128kbps, 192kbps, 320kbps
    PSP (PlayStation Portable) video bitrates such as: 768kbps, 1500kbps
    DVD (MPEG-2) bitrates such as: 8000kbps, 9800kbps
    Blu-Ray/HD bitrates such as: 16000kbps, 25000kbps, 50000kbps

    All of these are usually expressed as Megabits/Kilobits/bits over time (in seconds), hence the “ps” at the end.
    eg. 16 Mbps = 16,000 kbps = 16,000,000 bps (bits per second)

    ~bits (lower-case ‘b’) and Bytes (upper-case ‘B’) are different~

    There are 8 bits (lower-case ‘b’) in 1 Byte (upper-case ‘B’)
    8 bits in 1 Byte
    8000 bits = 8 kilobits (‘kilo’, which is 1000 Bytes) = 1 KiloByte
    8000 kilobits = 8 megabits (‘mega’, which is 1000 KiloBytes) = 1 MegaByte 

    For example, if you were rendering out a movie to upload to YouTube and you chose an output bitrate of “8000 kbps” in your editing/compression application, that is 8 Mbps (bits, lower-case ‘b’), which means 8 Megabits per second. Converting that into Bytes (upper-case ‘B’), means that video will be running at 1 MBps, which is 1 MegaByte per second (upper-case ‘b’). 

    At that bitrate (1MB/s), it is the same bitrate as our example above [just under where it says “More Bitrate = Bigger Filesize”] and it will take up roughly 60MB of space on your hard drive every minute of recording. Thus is the interaction between Bitrate and File Size and how to convert between the two. The higher the bitrate setting used, the bigger the output file size will be (the recording). 

    There is one other formula to remember: More Bitrate = Better Quality. This formula applies to almost everything digital: video (DVD/BluRay), audio (MP3/MP4), pictures (PNG/JPG), any multimedia that is digital. If you allow/use more bitrate, the picture/music/video is represented better [or to be more precise, closer to the original input] because there are literally more bits used to create the picture/sound/etc.

    Quick example – think of a square that is divided up into 9 sections. Now pretend it is trying to ‘represent’ a painting, any painting you can think of. With only 9 blocks of data available (each one can only be a certain color), then it would look like nothing but some colored blocks and barely look like the painting at all. Now, imagine a square divided up into 80 sections. Pretend it is trying to represent the same painting. Even though it will be ‘blocky’ still, if each section can be only one color, it will still look ‘more like the original’ than the 9-sectioned block, right? 

    That’s the interaction of bitrate and quality.

    Which means, for digital compression, it is essentially a ‘balancing act’ between Quality and File Size, with Bitrate being the tool to measure with. Do you want a high-quality output? Then turn up the bitrate and you’ll end up with a large file size. Do you want a small file size? Then lower the bitrate and you’ll get lower quality as well. That’s the essence of bitrate, in a nutshell.

    Bitrate (in Layman’s Terms)  /end



    The x264 Interface and Configuration in “Easymode”
    (The Official interface with red x264 logo)

    With the official version of the interface for using the x264 codec (“x264vfw”), there is only one screen, with pulldown bars to adjust most settings.
    The Basic Section

    To start with, under the Basic category, there is a Preset setting. This is a very handy setting, which makes many of the more obscure/hidden choices within this codec (there are dozens, behind the scenes) easy to configure. By clicking on the question mark near the bottom right corner (“?”), you can see the intimate details of the different Profiles and Presets that can be selected in these pull-down menu bars within this first “Basic” section of the interface.

    For game recording, we are more concerned with speed. We don’t want the codec to break out it’s magnifying glass and scrutinize each frame coming through in strict detail, because that would cause it to slow down, which will cause it to ‘lag’ behind, not only in the game, but in the recorded file itself as well (“choppy-ness”). 
    So, the first thing to do, when using this codec for ‘live’ game recording, is to change the Preset setting from it’s original default of Medium to “Ultrafast“. This is the fastest option for this setting.
    The other options, such as Superfast, can also be used, but be aware that the more you go down the selections available, the more options are being ‘turned on’ behind-the-scenes with this codec, and while some of them do help apparent quality of the video, they are geared more towards a slow, steady, long-term compression session (like when you might archive a video/movie) with high-quality settings and slow, scrutinizing analysis of the frames. While not a bad thing, for game recording, we don’t want that. We want it to save what we are seeing on the screen fast, to a file. We want speed. Feel free to take a look and learn about the various options the other Presets turn on [many of them are covered in this article further down], but for optimal speed, Ultrafast is the setting to use.
    The next pull-down set of options to choose from is Tuning. These are also a set of pre-selected options that, depending on which one you choose here, will enable or disable certain functions in the codec. These choices are helpful is easily fine-tuning the codec to compress a movie/video/clip of each certain type, as it enables options in the background that will help with efficient, detail-oriented compression of that certain type of material. 
    For game recording, again we are more concerned with speed. These options, while helpful in a slow, ‘leave-it-overnight’ compression session of clips or movies of ours we want to save; for live game recording we want to leave it at it’s default setting of “None“, so that the codec keeps it’s magnifying glass put away and doesn’t spend any extra time analyzing the frames coming through.
    There are two checkboxes below these first two pull-down menus and they are titled “Fast Decode” and “Zero Latency“:
    Fast Decode turns off a few options [behind the scenes] that help by reducing the processing ‘load’ of the video stream, such as CABAC and Deblocking [these are explained in more detail further within this article]. These are options that help keep some quality (especially at lower bitrates), but as the name proclaims [“Fast”], for optimal speed of recording we want this option “Checked“, to enable it (which will turn off these extra options for now).
    Zero Latency also turns off a few options behind the scenes, ones that increase compression time, such as B-frames [explained later in this post] and how far to ‘look ahead’ at frames coming in, for analysis. Since we want speed for recording our game footage and less analysis [remember, more analysis slows things down], we want this option “Checked” to turn off the extra options that are ‘behind-the-scenes’ with this setting.

    The rest of the settings in this Basic section of the interface need not be adjusted for game recording, but a good Wikipedia page, talking about the various Profiles and Levels and their capabilities can be found here:
    http://en.wikipedia.org/wiki/H.264/MPEG-4_AVC

    The Rate Control Section

    All of the below paragraphs between these red lines of text is the same for both the Official and the Unofficial versions of the x264vfw interface and is only duplicated for ease of reading their respective sections

    The main thing in here (and really the only thing to adjust for game recording in this tab) is the longest bar right in the middle, the main datarate control and compression decision to make, is all in that one bar. I cannot even make a suggestion on what to use [ok, I can actually], since it will partially depend on what type of game you are recording, your hardware, what kind of compression you are looking for and many other factors. I will attempt to simplify it however and give a suggestion at the end. (More importantly for game recording, there is one choice that is slightly faster than all the others).

    To begin, since we are going to be using x264 for game recording, we cannot use the Leeloo Dallas Multipass Options. Multiple passes (usually 2 or 3) when compressing/archiving video can greatly increase quality, but that means 2-3 times the analysis, double-checking and then further compression by the codec. Literally processing every frame twice (for 2-passes for example). That’s great when we want to keep a movie in a small, ‘as-good/high-as-we-can-get’ quality, forever. When recording games however, we want [one guess] speed. We can only accept “Single pass” as our option, because we just want the codec to see what frames are coming in, take a quick glance, and compress them into our output video file. One pass.
    Starting with ABR (Average BitRate), the “bitrate-based” setting, this setting allows you to punch in the average bitrate you want to record at and it attempts to stick with it (it will go lower, but try to never go higher than what you set here). This setting basically tells the codec, “Keep within this bitrate, I don’t care if the quality goes down”, because as the bitrate ceiling is reached, it will quickly degrade in quality, as more/high movement occurs on the screen/frame. It is good for keeping within a certain file size, if that is your desire, but it also causes a bit of ‘lag’ and is not seemingly optimized for ‘live’ capturing.
    CQP (Constant Quantizer Parameter) is a setting where you are basically telling the codec, “Keep this level of Quality”, and it will do it’s best to keep that level of quality for all frames/scenes. However, it will spend more time (and bitrate) on fast-motion/high-action scenes. This is good if you want to keep a movie visible clearly when a lot of things are going on, but it will also result in the higher usage of bitrate, which means larger file sizes. This may sound like a good thing for game recording (and for quality, it is), but the time spent analyzing the faster-motion scenes means that it is actually slowing down (in terms of the codec breaking out it’s magnifying glass and scrutinizing the frames that are passing by), which results in ‘lag’, both in the game and in the recorded video file itself (“choppiness” on playback).
    Lossless should attempt to lose no quality, processing only very little and passing all of that nice detail directly to the recorded video output. While sounding good in theory, in practice the utilization of ‘lossless’ in x264 must be geared towards slow, analyzed video compression and not ‘as fast as we can get to avoid lag’ “live” game recording, because the result of this setting [at this time] is actually a lossy, compressed (it does not seem to go far beyond 100,000kbps), low bitrate (compared to ‘true loss-less compression’ which is much higher) capture. It does look decent, but it is also very demanding on the system and causes a large framerate drop for the level of detail that should be coming out of it [and doesn’t]. This codec does not seem to be optimized for lossless recording at this time and I do not suggest using the Lossless setting here.
    CRF (Constant Rate Factor) is sort of a combination of ABR and CQP. At any given rate factor, a certain bitrate is maintained, and when the motion on the screen goes very high and the bitrate gets too high to represent what is occurring in the frame (or hits the ‘ceiling’ bitrate that it is restricted to, which can be set), then the quality begins to suffer, as the codec ramps quality down and compresses the fast-moving (“not as easy for the human eye to see”) material, until things settle down on the screen and there is slower motion (such as a person walking). Then the quality ramps back up (the bitrate staying with the specified parameters) to keep the apparent quality high to the human eye. This is how CRF is supposed to work, and it seems to do a good job of that. 
    Game recording with CRF isn’t as cut-and-dry as slow, long-term video compression/archiving with CRF, where it has time to figure out how to compress the fast/blurry scenes and make the slower/clearer scenes look better and change the bitrate/quantization respectively. Quantization can be thought of as ‘apparent spoilage’ of the material, where a certain amount isn’t even noticeable to most humans, and in some fast-moving-high-action scenes, it is even preferable to some eyes. Low bitrate and/or high quantization would both result in loss of detail and ‘blurring’ or ‘smoothing’ of video most of the time and can result in compression artifacts such as Macroblocks and Gibbs Effects (“mosquito noise”), as the codec tries to decide ‘what to keep’ and ‘what to lose’ (lossy compression). With CRF, it usually will try to keep a slow-moving scene (someone walking, people talking) detailed, without much quantizing (‘spoilage’), so that it looks good. It will take high-motion (fast action, fast changing) scenes and quantize them more (smoothing, blurring, ‘spoiling’) since the human eye won’t notice it as much on fast-motion, already-slightly-blurred changes on the screen.
    To summarize the differences between the types of data rate controls (the choices in this pulldown bar):
    CQP is like stating, “Keep this quality, I don’t care how big the bitrate/file gets” and ABR is like stating, “Keep this bitrate/filesize, I don’t care how crappy you have to make the video look to stay within that”, CRF is more like stating, “Try to keep this bitrate, but change it a little as you need (within a certain amount) and make the video look slightly crappy if you need to as well, but don’t let either one get too out of wack”. As CRF seemed to also be the one with the least amount of effect of the system in the form of ‘lag’ [only slightly less than the other ones in testing], being so highly configurable (compared to the other choices, where you can state a bitrate to stay within and it adjusts itself), I suggest using CRF for your x264/AVC game capturing.

    Some Data / Bitrates seen with CRF

    Since it looks like we are going to be sticking with CRF as our main datarate control factor [it performs slightly better than the other choices in tests], here’s an example of some bitrates that can result from using it (in kilobits per second):

    Recorded game: Hitman: Absolution Benchmark [grainy, panning, high and low motion areas]
    Recorded codec: H.264/AVC (MPEG-4 Part 10) using the x264vfw interface
    Recorded settings [some]: No Deblocking, No Max Bitrate, No CABAC, adjusting only CRF

    CRF 51  ~1200 kbps (lowest possible quality setting for CRF)
    CRF 42  ~1600 kbps
    CRF 32  ~6000 kbps
    CRF 29  ~8500 kbps
    CRF 26  ~14000 kbps
    CRF 23  ~22000 kbps (codec default setting for CRF)
    CRF 22  ~23000 kbps
    CRF 21  ~32000 kbps
    CRF 18  ~45000 kbps
    CRF 15  ~64000 kbps
    CRF 13  ~79000 kbps
    CRF 10  ~101,000 kbps
    CRF 5    ~119,000 kbps
    CRF 1    ~119,000 kbps (highest possible quality setting for CRF)

    As you can see, the higher the CRF, the lower the bitrate, so the lower the recorded file size will be (but also the lower the apparent quality). If you desire a higher-quality recording, then a lower CRF is what you want (even with a very low CRF, the bitrate is nowhere near as high as say, a FRAPS or YV12 recording (which can both easily be over 500,000 kbps), but that is the nature of the codec as it tries to slightly compress everything that passes through it.

    It can also be seen, that is it is not a strict/hard-and-fast rule of evenly-spaced steps, when it comes to the CRF setting and Bitrate. It cannot be easily calculated that “two steps up in CRF equals this much more bitrate”. That is partially the nature of the compression and partially what occurs using CRF as a datarate control. When there is more motion on the screen and as it changes, the datarate will change as well, to try to keep within certain bitrate/quality boundaries and still accurately represent what is occurring on the screen/in the frames. With almost any form of compression/codec, only if the recording was using a completely fixed bitrate, or recording a static picture/view, would it be easy to calculate the adjustments required for a certain bitrate change. It is built into the codecs to adjust themselves as needed.

    What CRF setting to use

    So, what CRF setting to use? The general rule is: the lower the CRF number, the more bitrate/quality you are allowing it to use, but the bigger the recorded file size will be.

    The choice is somewhat objective, as CRF18 may look good to me to record a first-person-shooter game with (the default is CRF23), but you may not like how it looks and want to use CRF10 to keep more details that you want to see.
    Someone may not like the compression artifacts they can see when recording Minecraft using CRF18 and want to turn it up to CRF15 so that it is crisper, with less ‘mosquito noise’ around the edges or corruption that they can see; but you may think it looks good enough at the default of CRF23 and leave it there like someone else may do. You see?
    Those are two very different types of video/games mind you, one is dark and grainy and the other is smooth, with hard edges, like animation; but you get the point. It can vary, not only person to person, but also game to game. A few short tests is all it will take however, and you quickly will find a CRF setting that you are happy to record with. You’ll find your own balance between, what will essentially be, these considerations:

    The higher the bitrate (lower CRF number) the higher the quality and file size will be
    The lower the bitrate (higher CRF number) the lower the quality and file size will be

    You will eventually decide, with just a couple tests, what is ‘good enough’ quality for your eyes/uploading, and what CRF to use on that game (remember the ‘balancing act’ of bitrate vs quality mentioned at the beginning?). You will also find that the quality recorded isn’t even kept, after compressing the final/edited video to upload at a video sharing site somewhere.

    All of the above paragraphs between these red lines of text is the same for both the Official and the Unofficial versions of the x264vfw interface and is only duplicated for ease of reading their respective sections

    That’s about it for the nice-and-easy one-panel official graphical interface for the x264vfw H.264/AVC codec. Just a few small changes and a decision of what quality/bitrate you would like to use and it is all ready  for you to record with whatever game recording program you prefer. Have fun with it!

    What follows below, is the unofficial, more detailed, three-tabbed version of the x264vfw H.264/AVC codec interface. If this version is not installed on your system, or you do not care to use the more complicated version (you definitely don’t have to), then please skip down to the section called 
    “Slash-whew-sweating-emoticon”. No version is better than the other, by the way, they both utilize the same codec, one just gives you more options to set [and I happened to install it by accident when learning about recording with the x264 codec in the beginning], that’s all.

    The x264 Interface and Configuration in “Hardmode”
    (The Unofficial interface with black x264 logo)

    There are three main tabs in this version of the x264 Video For Windows interface: 
    Main
    Analysis and Encoding
    Rate Control and Other
    Each Tab has many different settings. We will talk about most of them – but not all of them – we are mainly concerned with the ones that will affect game capturing. I am going to be going through the Tabs in reverse order. This will help to explain the concepts in a more logical order [believe it or not].

    Rate Control & Other Tab

    In the ‘Rate Control and Other’ Tab, our main attention need only be on the VBV bitrate/buffer settings in the first Rate Control area. The other settings can be tweaked, but this need be the only one to change – when concerned only with game capturing – as it can dictate the final output filesize of our recording. 
    Why all that math and talk about bitrate above? Because of the very first setting we are going to cover, part of the Rate Control section:

    The very first setting in this third tab of the x264vfw interface is something called “VBV max bitrate” and it is expressed in “kbit/s”. Yay, we just learned about that! It means that the value typed in here will be accepted as “kilobits per second”.

    What does the “VBV” mean? It stands for “Video Buffering Verifier” and this setting will let us state the overall maximum bitrate we want to restrict the video recording to be, so that it does not go over it. 
    Why would we want to do that? Remember that the amount of bitrate (per second) that we are using to record with affects the output video file size. If it is a large amount, the file size will be bigger. If we wanted to restrict the recorded output file size and keep it smaller, we could put an amount in here and it will do it’s best to keep within that amount, allowing us to control how much bitrate it uses to record with (and thus control how big the game recording output will be).
    So, to use our example just above, if we wanted to restrict the bitrate of the game recording output to be only 1MB/s (1 MegaBytes per second), what do we do? 
    That’s right, we convert it to lower-case (small-‘b’) bits, first:
    We want 1 MegaByte per second of a bitrate
    1 MegaByte is 1000 KiloBytes
    since 1 Byte = 8 bits
    then 1000 KiloBytes = 8000 kilobits
    so to restrict the maximum bitrate allowed for our capture to 1MB/s (taking up 60MB of drive space per minute of recording) we would put “8000” in the ‘VBV max bitrate’ box.
    This box then, gives some control over how much diskspace you want to devote to the game recording file output. If you do not want to restrict the bitrate, do not put anything in these first two boxes on this third tab. 
    If you do want to set a restriction here on the bitrate, set a “buffer size” as well (the box just below the first one). This ‘buffer size’ gives a sliding-window-view of how much the codec will keep track of what is going through and ‘watch’ to make sure that it stays below the amount in the box above (the ‘max bitrate’ box). It is used more for compressing for portable devices (which have less RAM and are not able to buffer/keep track of a large amount at a time and therefore must have a restricted amount set here).  
    For our purposes – game recording – remember that we must be more concerned with speed (to reduce lag), so in this box, we cannot put a very large amount. Why? Because the larger the buffer, the more that the codec will try to ‘store up’ in RAM, in order to ‘watch it’ (process it) and keep track of how big the bitrate gets, in order to keep our restriction of the ‘max bitrate’ box on it. So, a smaller amount such as “2000” up to maybe “4000” in this ‘buffer size’ box is a good amount. The overall buffer size also allows room for the video to ‘go over slightly and come back down to within’ the amount we set, but the larger the amount is, the more data will be held behind for processing that will be done on the game recording and the slower everything will get – and we don’t want that – we want as close to ‘Lag Free’ recording as we can get. A “0” then, would be the optimal amount to put in here, when speed is a concern; but then we would not be able to set a maximum bitrate… more on this later in the article…
    That’s all we will adjust on the Rate Control & Other tab.
    Analysis & Encoding Tab
    Here’s where we will do the most adjusting, as these settings in here are the ones with the most impact on speed and game recording.
    In the Analysis section, the first few adjustments are checkboxes concerning Partitions. Partitions are exactly what they sound like: it is how much the codec will divide up the screen, into sections, so that it can analyze each section and look at what is changing, decide how to compress it, how much to compress it, and so on. For game recording, remember we are more concerned with speed, than messing with how the codec is going to scrutinize the screen, so we are going to uncheck everything in the Partitions sections. Really. We are also going to uncheck the Adaptive DCT setting (which will deselect/lock out/grey out some of the checkboxes for us).
    For game recording, we are going to leave a checkmark in the “Fast P-skip” setting.

    Frame Types (in Layman’s Terms)  /start

    There are three main types of frames in video encoding:
    I-type frames
    P-type frames
    B-type frames

    I-frames are ‘Intra-coded Frames’, sometimes called Information Frames, because they hold the most information in a ‘group of frames’ (which is what makes up a video) and therefore I-frames take up the most space (as far as the amount of space it will take up on your hard drive). They also look the best as well, as they usually use a higher bitrate (which is why they take up the more space). They are utilized by the codec to indicate a large change in what is going on in the video/on the screen, like a sort of ‘reset’. They can usually be identified by the screen being ‘cleared up’ of blocks/glitches from video compression, as the compressed video is played back. 

    For instance, if you are running down a dark hallway and turn a corner and there is an explosion, in order to more accurately represent that large change in color and motion in the game recording, the codec will most likely decide to insert at least one I-frame and use a larger amount of data to keep more detail as it tries to represent all of the huge changes going on, on the screen and in the frames.

    I-frames also serve some other purposes: the ‘intra-coded’ means that they are not dependent on other frames around it in the video  [which is a collection of frames], as they hold all the information needed to represent the frame all within itself [remember ‘inter-murals’ in school involved other schools and ‘intra-murals’ was contained all within your own school, this is the same thing]. 

    They also are usually used as Keyframes. Since I-frames contain all the data need to represent the entire frame, on it’s own, video applications can use it as a ‘starting point’ or ‘reference point’ (“keying off of it”) and allow for more compatible cutting/editing on them and use them to start ‘seeking’ from, when editing a video. The two main things to remember about I-frames/Keyframes [the same thing] is that (1) I-frames can stand alone all by themselves, as they have all the information needed to display an image/frame, and (2) I-frames allow video editing programs [like Sony’s VegasVideo/MovieStudio/Pro and Adobe’s Premiere/Pro] to ‘reset’ and show you where you are starting to edit from – if there are a large number of frames between these I-frames (“keyframes”), it will take longer for the program to read between all of them and then show/allow you to start editing from where you have selected in the video editing program (it will take longer overall to edit by hand as the program starts and stops and you have to wait while editing).  

    MJPEG game recordings are made up entirely of I-frames, as every frame in the captured video is it’s own JPEG compressed picture and it is the most editing-friendly and compatible codec to capture with, no matter what game capturing program you use. In fact, most video editors can read MJPEG without installing any other codecs on your system 

    P-frames are called ‘Predicted Frames’. They hold far less information in a group of frames (video) and take up far less space. They actually only hold the differences from the Previous I-frame, that is, they only keep track of the changes on the screen/what has changed on the screen since the last I-frame, which is why they are far smaller than I-frames. 

    For instance, if you are playing a character in a game and you are just standing at the mailbox reading an in-game message, there isn’t much changing on the screen at all. Perhaps on the side of the mail window, there is only someone running by and that is all that is happening on the screen, nothing else is moving at all. P-frames will only keep track of the movement that person running by and not keep track of the mail message or anything else going on in the frame (things that aren’t moving) and it will save only those changes to the game recorded file as P-frames. Hence, they can indeed take up a much smaller amount of space in a game recording, since they are only recording the things that are changing on the screen.

    B-frames are ‘Bi-directional Frames’ (called ‘Bi-Predictive Frames’). They hold even less information than P-frames, as they are only keeping track of the differences between any frame before or after itself (even using P-frames that are around it and not needing an entire I-frame to start from). This means they are only only keeping track of very small changes (only one frame ahead or behind) and can therefore be extremely small and take up very little space in a video file. B-frames are one of the reasons why we can archive/compress movies in such small file sizes – only the differences of what is going on, on the screen/in the frames, is being kept track of. Both P and B frames help to save a ton of space when it comes to video compression.

    Frame Types (in Layman’s Terms)  /end

    Why all that talk about the different types of frames in a group of frames (video)? Because now we can easily understand the next few settings in the configuration window. 
    Fast P-skip is a setting that allows the codec to look at P-frames and decide if there are enough changes to analyze it further, or ‘skip’ over them and just process them as they are. This is decided on by the codec when it looks at some other settings on this tab (such as the “ME” settings) but for the most part, it helps speed – our main concern with game recording – more than it helps things to ‘look good’, so we will leave a checkmark in it, as we briefly stated above.
    Max frame refs and Mixed refs are talking about Reference Frames and how many to use in a group of pictures/frames. When encoding, a codec can use frames in front (P-frames) or in front and behind (B-frames) of the current frame it is working with, to keep tracks of what has changed between frames. When encoding for movies, we want as many as possible (or as many as the codec decides to put in) in order have things keep a lot of detail wherever it is needed, especially for scene changes; but for game recording, we want things to run faster (so that the game capture does not lag the game or cause lag within the recorded file (“choppy-ness” in playback), so we actually want the codec to use as little number of Reference Frames as possible.
    Remember, every time the codec has to ‘think’ or analyze the frames more, it will slow down to break out it’s magnifying glass and scrutinize, so what we want for this setting is the lowest (one) Reference Frame (put a “1” in the Max frame refs box) so it doesn’t have to do much more work than just looking quickly one frame ahead or behind, when when figuring out what has changed. 
    Mixed reference frames allow the codec to compress frames based on changes in frames that are also being referenced by other frames [if you can follow that]. Again, the codec is going to have to slow down and take a look, and for game recording, we want things to stay lean and mean (fast), so uncheck this bad boy (if you make the Max frame refs a “1”, it will be disabled anyway, since it does not have enough frames to deal with to look around at them anyway).
    The next few settings down that all say “ME” refer to Motion Estimation. This is the process of keeping track of where things are moving on the screen and how to deal with compressing the changes it is keeping track of. For game recording, we want the codec to analyze as little as possible (so it doesn’t lag behind what is going on, on the screen) so we must choose the lowest settings for all of the “ME” options. 
    That means “Diamond” analysis as the ME algorithm (pulldown menu choice), an ME range of the smallest we can choose from (“4”) and the lowest amount of Subpixel ME refinement we can have (“0” or no subpixel refinement). Remember, we want the codec to just save what is happening on the screen and analyze as little as possible, so it doesn’t fall behind.
    With the choices above, Chroma ME and the Psycho-visual Rate Distortion Optimization strength will be locked out/not applicable, which is good for game capturing, as it scrutinizes the frames that are coming from the game even less.
    The next couple settings, in the middle column of the tab, that say GOP in them, are talking about the size of the Group Of Pictures we want in our capture. If you can recall the things we have already said about how a codec decides to compress frames, it looks to frames ahead and behind at times, looking at the differences between them, and then decides how to compress the frames based on what it finds (and the settings we set). For movie compression, we want a large number, so that the codec mainly keeps track of the differences only between frames, as much as it can, and a large GOP size allows it a lot of ‘room to move’ and look around. For game capturing, we don’t want it to be quite as big, as the more frames on it’s plate it has to deal with, the more it will slow down and take time to decide what to do with them. 

    There is also a chance that some video editing applications will not like the large (or any) Groups Of Pictures and may see the video stream as corrupted or give wierd artifacts/effects when it plays it back. This is one reason why using MJPEG as a game recording codec is suggested often, as it’s built-in GOP is “1”, as evey frame is it’s own self-contained ‘group’ and no editing app has to mess with it or over-analyze it. It is the most compatible, but you can use any codec you wish, but you may have to change the codec’s Keyframes or GOP to “1” for compatibility [more on this in future articles!]


    Hence, we will set a nice low number [I personally used “50” around the time of this post]. Be aware that if the number is a multiple of the framerate you are recording in, Videophiles may notice the screen ‘shifting’ or having other odd effects ‘in time with’ the framerate (eg. if recording at 60fps and the GOP size is 60, some people notice the screen ‘correcting’ or ‘shifting’ or ‘flickering’ every second, as it ends the group or frames and starts a new one every second).
    You can use “1”, which will make the codec act like MJPEG in a way, but then the codec will not have any room to analyze/compare/compress anything, and the resulting file will require much more bitrate to keep detail (to accurately represent what is going on in each frame)… more on that later in this article…
    Weighted P-frames and Max consecutive B-frames is yet more analysis for the codec to do (especially B-frames, which remember, is a frame that ‘looks both ways’ for changes to frames in front and behind it, therefore can slow down recording a lot). For game capturing, we gots’ta keep setting things for speed and not letting the codec analyze too much. Change the Weighted P-frames to “None” (via a pull down bar) and the B-frames to “0” if they aren’t already. This is effectively telling the codec “you ain’t got time fo’ B-framez” so the rest of the settings that say “B-frames” should be locked/greyed out after that.
    [In tests, enabling B-frames would actually crash the x264vfw app]
    Under the Encoding section, the last column of this tab, the first section has to do with Deblocking
    Deblocking is a way to try and ‘hide’ areas where the codec has cut out detail or ‘let go of data’ (lossy) in attempts to conform to the other settings in the codec and/or compress the frames highly. I’m sure almost everyone has seen Compression Artifacts like macroblocks or Gibbs Effects (mosquito noise) in high/over-compressed video and video streams. It’s not very pretty and turning on the Deblocking filter is one way of masking these artifacts, so that the video overall looks nicer to the human eye. 
    The problem with Deblocking is that the codec will smooth things out, when trying to hide artifacts (especially ones that occur with lower bitrates/quality). It can be forced to keep detail with negative values (useful for movies/games with film grain), but overall it still takes more compression time to use, as the codec stops and analyzes the frames, looking for what to Deblock. So, for game recording for the most part, for optimum speed, Deblocking should be disabled, that is, “No Checkmark” in the box for In-loop deblocking filter (which will disable the two Deblocking settings below it).

    [In my own trials/experiments, I found that a low amount of deblocking (as in “1”) for these two recording settings is acceptable and helps to hide some otherwise icky-looking compression effects that occur at lower bitrates (bitrate control is covered more in the next section), but for optimum speed (it is not needed at higher bitrates anyway) and especially for older/less powerful systems, turning deblocking off will always speed things up.]
    CABAC is extra analysis that can really make a difference in compressing video. Some mobile players cannot even use it though, as it requires more processing power. The optimal setting for this, as it is extra analysis/processing being done – for game recording – would be “Off” (unchecked).

     [I have successfully done many recordings with CABAC on, as it seems to have only a slight effect on recording ‘lag’ on my system; but for optimum speed/less lag when recording (and at a slight loss for keeping some quality), it should be disabled.. for speed. ]

    The only other thing to adjust in this tab, when game recording, is the Trellis setting. Trellis is a way of analyzing and attempting to keep certain detail when compressing, especially at lower bitrates, but as many times already mentioned, we want speed for game recording, so set the Trellis analysis to “Off” (via a pulldown bar). 

    Main Tab

    All of the below paragraphs between these red lines of text is the same for both the Official and the Unofficial versions of the x264vfw interface and is only duplicated for ease of reading their respective sections

    The main thing in here (and really the only thing to adjust for game recording in this tab) is the longest bar right in the middle, the main datarate control and compression decision make, is all in that one bar. I cannot even make a suggestion on what to use [ok, I can actually], since it will partially depend on what type of game you are recording, your hardware, what kind of compression you are looking for and many other factors. I will attempt to simplify it however and give a suggestion at the end. (More importantly for game recording, there is one choice that is slightly faster than all the others).

    To begin, since we are going to be using x264 for game recording, we cannot use the Leeloo Dallas Multipass Options. Multiple passes (usually 2 or 3) when compressing/archiving video can greatly increase quality, but that means twice the analysis, double-checking and then further compression by the codec. Literally processing every frame twice (for 2-passes). That’s great when we want to keep a movie in a small, ‘as-good/high-as-we-can-get’ quality, forever. When recording games however, we want [one guess] speed [I just realized this whole article can be it’s own drinking game]. We can only accept “Single pass” as our option, because we just want the codec to see what frames are coming in, take a quick glance, and compress them into our output video file. One pass.
    Starting with ABR (Average BitRate), the “bitrate-based” setting, this setting allows you to punch in the average bitrate you want to record at and it attempts to stick with it (it will go lower, but try to never go higher than what you set here). This setting basically tells the codec, “Keep within this bitrate, I don’t care if the quality goes down”, because as the bitrate ceiling is reached, it will quickly degrade in quality, as more/high movement occurs on the screen/frame. It is good for keeping within a certain file size, if that is your desire, but it also causes a bit of ‘lag’ and is not seemingly optimized for ‘live’ capturing.
    CQP (Constant Quantizer Parameter) is a setting where you are basically telling the codec, “Keep this level of Quality”, and it will do it’s best to keep that level of quality for all frames/scenes. However, it will spend more time (and bitrate) on fast-motion/high-action scenes. This is good if you want to keep a movie visible clearly when a lot of things are going on [I hate watching a low-quality video stream online and it goes absolutely-stupid blurry at high-motion scenes just because there are many things happening on the screen], but it will also result in the higher usage of bitrate, which means larger file sizes. This may sound like a good thing for game recording (and for quality, it is), but the time spend analyzing the faster-motion scenes means that it is actually slowing down (in terms of the codec breaking out it’s magnifying glass and scrutinizing the frames that are passing by), which results in ‘lag’, both in the game and in the recorded video file itself (“choppiness” on playback).
    Lossless should attempt to lose no quality, processing only very little and passing all of that nice detail directly to the recorded video output. While sounding good in theory, in practice the utilization of ‘lossless’ in x264 must be geared towards slow, analyzed video compression and not ‘as fast as we can get to avoid lag’ “live” game recording. The result is actually a lossy, compressed (it does not seem to go far beyond 100,000kbps), low bitrate (compared to ‘true loss-less compression’) capture. It does look decent, but it is also very demanding on the system and causes a large framerate drop for the level of detail that should be coming out of it (and doesn’t). This codec does not seem to be optimized for lossless recording at this time and I do not suggest using the Lossless setting here.
    CRF (Constant Rate Factor) is sort of a combination of ABR and CQP. At any given rate factor, a certain bitrate is maintained, and when the motion on the screen goes very high and the bitrate gets too high to represent what is occurring in the frame (or hits the ‘ceiling’ bitrate that it is restricted to, which can be set), then the quality begins to suffer, as the codec ramps it down and compresses the fast-moving (“not as easy for the human eye to see”) material, until things settle down on the screen and there is slower motion (such as a person walking). Then the quality ramps back up (the bitrate staying with the specified parameters) to keep the apparent quality high to the human eye. This is how CRF is supposed to work, and it seems to do a good job of that. 
    Game recording with CRF isn’t as cut-and-dry as slow, long-term video compression with CRF, where it has time to figure out how to compress the fast/blurry scenes and make the slower/clearer scenes look better and change the bitrate/quantization respectively. Quantization can be thought of as ‘apparent spoilage’ of the material, where a certain amount isn’t even noticeable to most humans, and in some fast-moving-high-action scenes, it is even preferable to some eyes. Low bitrate and/or high quantization would both result in loss of detail and ‘blurring’ or ‘smoothing’ of video most of the time and can result in compression artifacts such as Macroblocks and Gibbs Effects (“mosquito noise”), as the codec tries to decide ‘what to keep’ and ‘what to lose’ (lossy compression). With CRF, it usually will try to keep a slow-moving scene (someone walking, people talking) detailed, without much quantizing (‘spoilage’), so that it looks good. It will take high-motion (fast action, fast changing) scenes and quantize them more (smoothing, blurring, ‘spoiling’) since the human eye won’t notice it as much on fast-motion, already-slightly-blurred changes on the screen.
    To summarize the differences between the types of data rate controls (the choices in this pulldown bar):
    CQP is like stating, “Keep this quality, I don’t care how big the bitrate/file gets” and ABR is like stating, “Keep this bitrate/filesize, I don’t care how crappy you have to make the video look to stay within that”, CRF is more like stating, “Try to keep this bitrate, but change it a little as you need (within a certain amount) and make the video look slightly crappy if you need to as well, but don’t let either one get too out of wack”. As CRF seemed to also be the one with the least amount of effect of the system in the form of ‘lag’ [only slightly less than the other ones in testing], being so highly configurable (compared to the other choices, where you can state a bitrate to stay within and it adjusts itself), I suggest using CRF for your x264/AVC game capturing.

    Some Data / Bitrates seen with CRF

    Since it looks like we are going to be sticking with CRF as our main datarate control factor [it performs slightly better than the other choices in tests], here’s an example of some bitrates that can result from using it (in kilobits per second):

    Recorded game: Hitman: Absolution Benchmark [grainy, panning, high and low motion areas]
    Recorded codec: H.264/AVC (MPEG-4 Part 10) using the x264vfw interface
    Recorded settings [some]: No Deblocking, No Max Bitrate, No CABAC, adjusting only CRF

    CRF 51  ~1200 kbps (lowest possible quality setting for CRF)
    CRF 42  ~1600 kbps
    CRF 32  ~6000 kbps
    CRF 29  ~8500 kbps
    CRF 26  ~14000 kbps
    CRF 23  ~22000 kbps (codec default setting for CRF)
    CRF 22  ~23000 kbps
    CRF 21  ~32000 kbps
    CRF 18  ~45000 kbps
    CRF 15  ~64000 kbps
    CRF 13  ~79000 kbps
    CRF 10  ~101,000 kbps
    CRF 5    ~119,000 kbps
    CRF 1    ~119,000 kbps (highest possible quality setting for CRF)

    As you can see, the higher the CRF, the lower the bitrate, so the lower the recorded file size will be (but also the lower the apparent quality). If you desire a higher-quality recording, then a lower CRF is what you want (even with a very low CRF, the bitrate is nowhere near as high as say, a FRAPS or YV12 recording (which can both easily be over 500,000 kbps), but that is the nature of the codec as it tries to slightly compress everything that passes through it.

    It can also be seen, that is it is not a strict/hard-and-fast rule of evenly-spaced steps, when it comes to the CRF setting and Bitrate. It cannot be easily calculated that “two steps up in CRF equals this much more bitrate”. That is partially the nature of the compression and partially what occurs using CRF as a datarate control. When there is more motion on the screen and as it changes, the datarate will change as well, to try to keep within certain bitrate/quality boundaries and still accurately represent what is occurring on the screen/in the frames. With almost any form of compression/codec, only if the recording was using a completely fixed bitrate, or recording a static picture/view, would it be easy to calculate the adjustments required for a certain bitrate change. It is built into the codecs to adjust themselves as needed.

    What CRF setting to use

    So, what CRF setting to use? The general rule is: the lower the CRF number, the more bitrate/quality you are allowing it to use, but the bigger the recorded file size will be.

    The choice is somewhat objective, as CRF18 may look good to me to record a first-person-shooter game with (the default is CRF23), but you may not like how it looks and want to use CRF10 to keep more details that you want to see.
    Someone may not like the compression artifacts they can see when recording Minecraft using CRF18 and want to turn it up to CRF15 so that it is crisper, with less ‘mosquito noise’ around the edges or corruption that they can see; but you may think it looks good enough at the default of CRF23 and leave it there like someone else may do. You see?
    Those are two very different types of video/games mind you, one is dark and grainy and the other is smooth, with hard edges, like animation; but you get the point. It can vary, not only person to person, but also game to game. A few short tests is all it will take however, and you quickly will find a CRF setting that you are happy to record with. You’ll find your own balance between, what will essentially be, these considerations:

    The higher the bitrate (lower CRF number) the higher the quality and file size will be
    The lower the bitrate (higher CRF number) the lower the quality and file size will be

    You will eventually decide, with just a couple tests, what is ‘good enough’ quality for your eyes/uploading, and what CRF to use on that game (remember the ‘balancing act’ of bitrate vs quality mentioned at the beginning?). You will also find that the quality recorded isn’t even kept, after compressing the final/edited video to upload at a video sharing site somewhere.

    All of the above paragraphs between these red lines of text is the same for both the Official and the Unofficial versions of the x264vfw interface and is only duplicated for ease of reading their respective sections

    Slash-whew-sweating-emoticon

    That was a lot to take in at once – but you made it through – and now you are set to record using H.264/AVC, whether you prefer Dxtory, Bandicam or use the completely free-to-use Afterburner from MSI. You are also now knowledgeable in both the Official and an Unofficial version of the x264 Video For Windows graphical way of setting up the codec, to change the settings.

    Other than the Rate Control setting above (CRF) which you can adjust and set how you want it, the rest of the settings I have personally tested and found which ones allow for the faster recording performance and which ones negatively affect the speed of recording, utilizing the x264vfw interface (which these programs use to record in H.264/AVC). Turning off/down the ones I have stated throughout the article should give you the fastest/closest to ‘lag-free’ recording you can get with this codec, while still taking advantage of it’s compression capability. [My own Personal Notes/Opinions/Settings are below]

    Please note that if your system is older or not as capable (perhaps you have a notebook/laptop which has less capability than a full desktop system with it’s own dedicated videocard and soundcard), you may have to do things like lower the recording resolution (or the resolution you are playing at in the game), increase the CRF number (so that it uses slightly less system resources to process the recording and will then use less bitrate and less disk space).

    There are many things that can be done to help with speed, make for smoother recording, less lag, etc.
    Here is a link to an article I wrote earlier on this blog, with general Tips to help with game recording:
    http://gametipsandmore.blogspot.ca/2012/05/tips-for-game-recording-currently-text.html
    No matter what game you play or what program you are using to record, these Tips will help you overall, with trying to record your games.

    Lastly, please note dear reader, that I am not saying “This codec is the best one to record with” or “use this one only”. I am merely showing that it is possible or how to tweak it for quality or file size, as to your own personal tastes. There are many codecs out there to choose from when game recording and although some are more apt for certain types of games than others, overall it is your own choice to do with as you will. 

    As always, do some of your own testing, see what works the best for you on your system and get things looking exactly how you want them to look – and have fun with it!


    Personal Short Version/Opinion
    and 
    Settings I use:

    H.264/AVC (MPEG-4 Part 10), is not normally a recommended codec to record with, for most people. It does not have the capability of super-high-almost-what-you-see-is-what-you-get quality that other codecs like FRAPS1, YV12, Lagarith or RGB Raw would give you. 
    Heck, the highest bitrate possible (using the CRF setting, the fastest of the Rate Control settings in my tests) is only about 100,000kbps. That’s still about 2-4x the bitrate of the average BluRay movie mind you, and it seems fine to me, to look at the recorded videos of it.

    Even if I had Terabytes of hard drive space to record to, I would still like to record in as small a filesize as I can, attempting at the same time to keep ‘good enough’ quality. Gone for me, are the days of filling my drives with FRAPS recordings (which have very high quality though) when today, with the more powerful CPUs and GPUs, I can record in a high MJPEG setting (for compatibility with editing apps) or a high MPEG-1 setting (which saves a lot on diskspace as well and has decent compatibility with video editors) – and now I can save even more space and record with MPEG-4 AVC, if desired. 
    For instance, on my older system, a dual-core cpu with an NVIDIA GTS250, recording with x264/AVC brings my framerate down by about ten frames per second and sometimes more. On my newer system, a six-core cpu with an AMD HD 6870, recording with x264/AVC, with the same settings, brings my framerate down by only a couple of frames per second with my settings. Wonderful stuff.

    I did many, many tests to find out what specific settings made differences (especially with the Unofficial version of the interface) and for the most part, it turned out as intuitive as it seemed at the outset: any setting that increased analysis and processing of the frames slowed things down. 
    I had to test it all of course, and I found many settings that didn’t make a ‘huge’ impact on performance, and with more powerful hardware these are able to be used and enjoyed, helping to compress the frames even further, keeping decent detail and resulting in a very small recorded file size. As you can adjust/optimize settings far more in the Unofficial interface (at least a bit easier/graphically), I tend to use that one more than the Official version; but in essence, both are the same thing. Here’s some of my findings [my settings are in these square brackets]:

    For the Official (“Simple”, red x264 logo) interface:

    I found that, on a more modern desktop system, the Preset can be turned ‘down’ a bit (the amount of analysis going up a bit), to Superfast or even sometimes Veryfast, since many of the hard-cpu-hitting options like Trellis and larger Motion Estimations don’t kick in at these settings. Anything lower/slower than that makes it lag behind too much as it processes frames.
    [I usually use Superfast]

    While Zero Latency is pretty much required for live game recording, Fast Decode is not entirely needed, especially if you have a faster rig to power the game and record at the same time on. My computer isn’t even top of the line but it can handle NOT using Fast Decode (which disables CABAC, and a couple other things). CABAC can have quite a bit of an effect on quality, and since it doesn’t seem to have a huge performance hit, I use it. Fast Decode also disables Deblocking and that leads into my next setting…
    [I always use Zero Latency]
    [Even though it helps with speed, most of the time I don’t use Fast Decode]

    The only other thing I change in the interface is deciding on the main Rate Control type and Rate Factor. In my own tests, CRF seemed to have the least amount of effect on framerate out of them all, and I fluctuate on what CRF I use, depending on the game I’m recording and what the recording is for. If I’m recording a high-quality test, of course it will be a low CRF, but it need not be a 1 to look good. I am quite satisfied with a CRF of 15-18 for decent-quality captures. The bitrate of a 1080p capture at that CRF ran about 45,000kbps, which is a high-quality BluRay movie’s bitrate. For just average gameplay for fun, I usually run a CRF of 21 up to 23. The quality is ‘good enough’ then, especially with a low Deblocking setting helping out (the Preset of Superfast leaves Deblocking “On” at the default 0:0 setting). I don’t recommend going below CRF23, with deblocking or not, as it just becomes too ‘garble-y’, to use a more technical term… Web broswer/low-motion games or hard-edged/animated games that look like Minecraft also need a higher bitrate (lower CRF), so that the hard edges aren’t messed up and the smooth/flat areas aren’t too compressed and get ‘blocky’.
    [I use a CRF in the range of 18 for higher-quality capturing, going up to 23 if disk space is low, and don’t suggest higher than 23, so that quality doesn’t suffer too much] 

    Nothing else need be adjusted in the Official x264/red logo interface, but I sometimes add “–keyint 50” or “–keyint 20” into the area (no quotation marks) ‘for advanced users’ at the bottom. This is a command that will force a keyframe/I-frame after that many frames have gone by. This helps to keep the seeking time low when editing and allows for closer cuts when not recompressing the clip when editing. If you having a problem with editing MPEG-4/AVC files, try using a –keyint setting of “1”, so that every frame is an editable/seekable keyframe. A higher GOP is better for file size but can take longer to seek when editing and Vegas or Premiere might have ‘trails’ or ‘corruption’ so might need a GOP setting of 1, see here for more info). You may want to increase the bitrate to keep quality then though, as the codec can’t really compress/do much of it’s ‘magic’ then, without room to work between frames. As stated above, the optimal codec for editing is MJPEG, but many do not like the quality (try turning it up to 100%).
    Leaving it blank and not using any “–keyint” command will allow the codec to use many more frames (250 is the default I believe) for compression and the resulting recorded file size will be very small.

    For the Unofficial (“Complicated”, black x264 logo) interface:

    The first tab is just the Rate Control setting. CRF seemed to have the least effect on framerate.
    I also sometimes add the –keyint setting to the command box at the bottom, just like I talked about a couple paragraphs up.
    [I use a CRF in the range of 18 or less for higher-quality capturing, going up to 21 or if disk space is low, up to 23 at the most and don’t suggest higher than 23, so that quality doesn’t suffer too much]

    For the second tab, there is a lot to change, but I mainly talked about why up in the article, so I’ll just state what I like to use here, after this paragraph on Deblocking:

    Deblocking can be forced to ‘leave things in’/keep details, by using a negative value, especially when dealing with effects such as film grain and minute details and noise; but for the most part deblocking will ‘smooth things out’, especially trying to hide where a lot of detail has been lost, where compression artifacts like Macroblocks and Gibbs Effects (mosquito noise) around edges would show up. I don’t recommend putting deblocking up too high though, as it can really make things downright blurry. With deblocking completely off, all of the detail is kept, but many things can look like they have a ‘wood grain’ pattern on them. With a high bitrate/low CRF, there is no need for deblocking at all anyway, as there would be a lot less compression/artifacting. When recording a high-quality test or something like that, I leave it off. When just recording random gameplay or myself doing something, I turn it on at a low setting, to help with keeping things looking slightly more ‘clean’.
    [I use Deblocking at 1:0 (CUDA default) up to 3:0, when I use it, but any more and things start to look ‘too smoothed out’ to me]

    For this second tab then:
    [No Partitions (all unchecked, Fast P-skip checked, 1 Max reference frame, ME algorithm on Diamond, ME range of 4, Subpixel ME refinement of 0 or 1 (any higher causes more lag), GOP size of 20 or 50 (this is the –keyint setting from above, higher is better for file size but can take longer to seek when editing and Vegas or Premiere might have ‘trails’ or ‘corruption’ so might need a GOP setting of 1, see here for more info), No Weighted P-frames, Max consecutive B-frames to 0 (none), In-loop deblocking filter unchecked (off) or checked (on) with a 1:1 deblock, CABAC on (it’s slower for less-capable systems), DCT decimation checked (on), Trellis set to Off]

    In the third and last tab of the Unofficial (black x264 logo) interface, I sometimes set a VBV max bitrate of about 40000 (kbps) just to keep the filesize down, especially when I’m going to edit and recompress for uploading somewhere (which usually gets rendered out for upload at that bitrate or lower anyway), it looks ‘good enough’ for me (this also requires a buffer of some sort, to allow it to check the bitrate as it goes up and down, so I put in 4000 or 10000 if I set a VBV max bitrate)
    [No maxbitrate usually, unless you want to save some harddrive space (eg. 50000k)]

    That’s all I change for both of those interfaces, from their defaults, as of the time of this post. 
    Keep in mind that as games are updated and Re-Optimized, drivers are Updated, and new hardware is released/purchased, I may change these settings (and I advise you to try some tests too, if you wish, when things change). Also, I am not a stickler for the utmost quality and don’t mind things getting compressed a bit, so you might want tighter/higher settings. 
    Mainly, I hope that this info helps some of you to either record with less lag (many people report that with more optimized MPEG-4/AVC settings they have less apparent lag) or just learned some terms and concepts that may help when editing and compressing your own videos/shows/etc and overall just help you record better/smoother. I actually enjoyed testing all of these things out and learning about it and I hope it helps anyone that is recording their gameplay adventures.


    See you in the games!

    My Trip to Bangladesh Cont…..

    The assignment is proceeding well, the evaluation questions have been designed and the questionnaire and show cards are prepared and translated in to Bangla. I will be using an “In Depth” interviewing technique. The evaluation itself has 2 aspects to it. Firstly; to looking at the internal mechanisms which either makes them effective or not as the case may be (As an internal service provider) and; secondly, getting conformation from outside the Unit (As an external service provider) to establish if they were effective. The main internal interviews have been conducted and now I have to conduct the external interviews. The external interviews are going to be held in the districts of Dinajpur, Nilphamari and Lalmonirhat. I will have to undertake an 8 hour journey over road to get to Sayedpur where I will be based. Hope to get back to Dhaka on the 15th.

    Quick Tip: Fallout 4 – TAB Key Stopped Working And Not Bringing Up The Pip-Boy? Here’s A Possible Fix [Text-Only]

    I have been having a ton of fun playing Fallout 4 lately [again, building up my Settlements too much and ignoring the Main Storyline!] and ran into a ‘small-but-game-stopping‘ issue where the TAB key appeared to stop working. “Hitting TAB wasn’t bringing up the Pip-Boy anymore..??”

    After doing some Troubleshooting and paying attention to what I was doing and pressing… it turned out to be a very simple issue – the TAB key was ‘locked’ out because of how I had used it in the Console.. Let me explain briefly:

    I was playing around with SweetFX in ReShade off and on again, mainly to take Screenshots as I had lost a ton during a recent Hard Drive failure [as in thousands.. I know… but I don’t usually back up screenshots or recordings].
    To open the Settings/Configuration for ReShade, the hotkey combination is SHIFT+F2.

    Unfortunately, something in this combination of Fallout/ReShade/Windows ‘locks out’ the Shift Key after doing this with the Console open in FO4, and when hitting Tilde again to close the Console, this leaves TAB ‘disabled’ and it no longer brings up the Pip-Boy.

    [This can also happen with the ENB series of utilities, which use SHIFT+ENTER to open and close the interface]

    The Fix for this was simple, once I figured it out: hit Tilde again to open up the Command Console, then hit SHIFT once, then hit Tilde again to close the Command Console. That’s all there is to it!

    Now the TAB key worked and I could bring up the all-important-and-totally-cool Pip-Boy once again! This is just a Quick Tip in Text-Mode only then; but I wanted to get it typed up and posted so that it could start to help out others that have run into this little problem [that seems to occur especially if running ReShade or ENB, in Fallout 4]. HTH

    The link between carbohydrates and insulin resistance

    The hormone insulin plays a major role in the metabolism of carbohydratesand their conversion to energy in the body. When you eat carbohydrates, they are converted into glucose in the bloodstream, which triggers the release of insulin. This virtually escorts the glucose to the body’s cells, where it can be used as energy. If there is too much glucose, the insulin turns it into glycogen, which is stored in your muscles and liver ready to be converted back toglucose when it is needed.

    However, in the high-refined ‘carob’ world in which we live, we often have too much glucose floating around in the bloodstream, and then insulin converts it to fat. And our body cells may become so flooded with insulin that they cease to be responsive to it, so the pancreas keeps producing more and more insulin in an attempt to get energy to your cells. This is known as ‘insulin resistance‘.

    Diet Start

    Over a period of time, less and less glucose gets used as energy, and more and more gets laid down as fat. Since insulin also sends messages to the brain to tell you that you are hungry, more and more insulin means increasing cravings for carb-laden food.

    The only people who are benefiting from refined foods are:

    • The dentists who have to patch up your decaying teeth
    • The pharmaceutical companies who have to sell you drugs to sort out the symptoms of your ailing immune system and your susceptibility to chronic and degenerative disease
    • The food manufacturers, who are only really interested in profit. If you add to this a high intake of caffeine, alcohol, smoking and a lack of exercise, then you will almost certainly be taking a wobbly walk down the road to ill health.

    Is it enough just to cut out refined carbohydrates?

    Totally banishing all things processed and adopting a healthier diet based on fresh produce is a definite start, but if you have a weight problem linked to insulin resistance, it may not be enough, because if you are still eating a diet that is too high in the wrong sort of carbohydrates — coupled with not eating enough protein or fat to slow down the rate at which these excessive carbs are hitting your blood-sugar levels — you will still have problems. A low-fat/high-carb diet can give you a nasty shock every time you jump on the scales.

    The thing to remember is that all carbohydrates have an effect on your blood sugar, and every gram of carbohydrate consumed is equal to one gram of glucose in your bloodstream. So if you are eating more than your body can burn for energy, or can safely store as glycogen in the liver, the rest will be turned to fat.

    The key factor in balancing blood-sugar levels and banishing thesymptoms of insulin resistance is controlling your intake of carbohydrates. In order to do this effectively you need to know which ones have the greatest impact on your blood sugar and which do not.

    Initially, this will need a little time and effort on your part as you learn about the different sorts of carbohydrates. You may find that the changes you have to make to your diet are quite drastic, but before long — as you start to feel and look better — you will be amazed at how little you miss the wrong kinds of carbohydrates such as processed and sugary foods. Youwon’t feel the need to pile your plate high with potatoes and pasta, because your newly balanced blood sugar levels won’t be crying out for acarbohydrate fix.

    ‘Setting Of The Month’: Bandicam’s Xvid Implementation (with Screenshots and Quality Analysis)

    As the First Post of a new type of article here at The Game Tips And More Blog
    [started due to popular demand!], I would like to explain a bit about my ‘Setting Of The Month’:
    What is meant by “Of The Month” (at least at this blog), is less ‘lunar syzygy’ and more ‘what is currently being served’, in concept. Every once in a while I will post what Recording Settings or Rendering Settings I am currently using. I want to begin doing these posts in response to two things:

    • It was requested by you readers! Over the first half of the year, I run a Poll here at the Blog (it is located on the top right panel area) and currently, the single most popular Requested Topic For Future Posts is “Tips and Tricks of Video Capturing and Editing”. Therefore, as part of answering that call ‘by popular demand’, by my respected readers, I want to share as a ‘Tip’ what settings I have been using of late to capture – not to tell you ‘what to use’, but to simply give everyone a suggestion – perhaps even a place to start from, when recording or editing their gameplay adventures.
    • I see ‘settings’ asked about a lot, everywhere. Whether it is in game forums, technical forums, video editing and recording application forums, or even in my Inbox once in a while, people are constantly asking what settings to use, or “what settings do you use” – and that’s great! I’m glad to see helpful replies of others (and sometimes short explanations on how someone is using a specific setting and why). As anyone who has asked me directly knows, I enjoy helping others with suggestions on settings and usually try to explain why I am using one setting over another.
    And so, here is the first edition of a new addition to this blog, without further adieu:

     

    This Month’s Featured Setting

    Bandicam’s Xvid Codec

    For the past little while, I have been messing with the Xvid codec – not the ‘official’ one from XviD.org that you have to download – the one that is built-in to Bandicam, easily available via pull-down menu in the Format area, where you choose which codec you want to record with. As of the most recent version of Bandicam [at the time of this post], Xvid is now the Default Codec that is pre-selected, when you install/startup Bandicam. Where in previous versions, a ‘Bandisoft-optimized’ MPEG-1 codec was the Default, now a ‘Bandisoft-optimized’ version of Xvid is thrust into the limelight – and I wanted to test this puppy out and see what tricks it can do!

    If you’ve were computing through the 1990’s, you may have heard about the Xvid codec. A competitor to the DivX codec around the turn of the millennium, I am actually going to skip over the history of the Xvid codec [other than this one paragraph]. Parts of such history may actually be a ‘dark affair’ (depending on who you talk to), worthy of it’s own short documentary, as the DivX vs XviD history has some aspects in common to the history of other products and companies that were popular over time [with Saturday Night Television Specials such as “Apple vs Microsoft”, “Xerox vs Apple” and more..]. As with many companies and products in popular use today, they all have “Origin Stories” that you won’t find on The Internet and never will… And Now, Back To Your Regularly Scheduled Program

    The Xvid codec is a version of MPEG-4 (it is MPEG-4 Part 2 or “H.263/ASP”), so it is directly related to it’s younger-but-bigger brother, AVC (which is MPEG-4 Part 10 or “H.264/AVC”). As such, Xvid [ASP] does not have many of the functions that are found in H.264 [AVC], such as Deblocking, where the codec will try to ‘hide’ some compression artifacts that occur due to over-compression; but Xvid is still a great codec to record with, it’s main strength being speed. Because it doesn’t have many of the processing functions of it’s more recent and bulkier MPEG-4 versions, it can ‘figure out a frame and save it to a file’ very quickly – which is essentially what is happening, technically, when game recording.

    Recording with Bandicam’s Default settings for their implementation of Xvid [designated herein as “Xvid(b)”**, to show that it is the “Bandicam-Optimized Version of Xvid”] will give you a Quality Setting of 80%. The capturing framerate, by Default, is set at 30 fps (Frames-Per-Second). The audio format, in this Default setting, is compressed “MPEG-1 Layer 2” format (MP2) for the Audio. Here is a screenshot showing what all of Bandicam’s Default settings, for their implementation of Xvid, looks like in one image:

    The ‘Setting Of The Month’: Bandicam’s Version of Xvid, included with Bandicam (Default Settings)
    Click to see Full Size

    Below, are a sampling of a handful of games and the framerate performance hits that were seen while recording with these Default Xvid(b) settings (i.e. the differences between ‘playing the game and not recording’ versus ‘playing the game and recording at the same time’):
    table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px; } .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc; } .tableizer-table th { background-color: #104E8B; color: #FFF; font-weight: bold; }

    Recorded Game Title                     Resolution      Performance Hit (Δ)
    Hitman: Absolution Benchmark 1366×768 ~ 2 fps
    Hitman: Absolution Benchmark 2560×1440 ~ 4 fps
    FurMark (Full Run) 1366×768 ~ 2 fps
    FurMark (Full Run) 2560×1440 ~ 0 fps
    Unigine Valley Benchmark 1366×768 ~ 6 fps
    Unigine Valley Benchmark 2560×1440
    Batman: Arkham City Benchmark 1366×768 ~ 4 fps
    Batman: Arkham City Benchmark 2560×1440 ~ 9 fps
    Skyrim (Introduction) 1366×768 ~ 0-8 fps
    Skyrim (Introduction) 2560×1440
    Minecraft 1366×768 ~ 0 fps
    Minecraft 2560×1440 ~ 0 fps

    table code created by Danny Sanchez (journalistopia.com)

    As you can see in the table above, the difference in framerate between ‘Playing’ and ‘Playing While Recording’ is very minimal [the performance ‘drain’ being accentuated in higher resolutions for most games]. Although only a handful of games were tested, I did try testing both spectra of resolutions possibly in use by the average gamer today, by recording with an ‘enthusiast’ resolution (2K/1440p) as well as a commonly-run laptop/notebook resolution (1366×768) which could also be run by older or less-capable systems. Bandicam’s optimized Xvid performs very well in the tests, with almost as low of a performance change as the ‘super-light-performance-hitting’ MJPEG codec.

    Like MJPEG however, Xvid’s weakness is the lack of tools to compensate for compression. Again, I mention here the MPEG-4/AVC ability to somewhat ‘hide’ compression artifacts, with code for utilities such as “Deblocking” built into the codec, where the edges of areas that the codec is making its calculations in are ‘softened’, so that the ‘blocky’ effect of high compression (called Macroblocking) is less visible. In Xvid, there is no such utility, so if too high a compression level is attempted [too low a bitrate is stipulated], then these ‘block’ artifacts can easily be seen, especially in ‘flatter’ areas of a frame (portions of the screen with less color and/or changes happening), as seen in the below frames, extractions from the actual recorded video frames themselves:

    [In the examples below, when the compression artifacts aren’t as obvious, I will show the entire screenshot in compressed JPG format, then underneath I ‘zoom in’ to show the compression artifacts from the codec as magnified extractions from the original video frames, in BMP (BitMaP) format. I use sampled areas for that, as full 1440p Screenshots in an uncompressed format would be over 10MB each]

    Xvid(b)** at 90% Quality [altered from Default 80% Quality Setting], Battlefield 3.
    Click to see Full Size
    The result when recording at 90% Quality (up from the Default of 80%) was very satisfactory, with only ‘nit-pickable’ parts to show the codec’s weaknesses, like the Upper Left area of this scene above (with the dark interior areas). Some artifacting can also be seen in the Middle Top area (slightly obvious even in this compressed JPG), where the plain sky areas take the brunt of the compression of this frame taken from the original game recording video produced by Bandicam.

    Xvid(b)** at Bandicam’s Default of 80% Quality, Battlefield 3.
    Click to see Full Size
    The above image is taken from a game recording of Battlefield 3 that had some pistol action going on, with an explosion caught in the background. The quality of Bandicam’s Default setting isn’t too bad and high action scenes can actually look quite acceptable. For example, in this frame above, with the explosion occurring on an upper walkway, only the Right Edge of the explosion (with the debris) has obvious Macroblocking – and the sidewalk [and foliage] macroblocks had to be ‘looked for’ here – and are less noticeable in the moving video. The ‘flatter area’ (with less colour variations) in this scene, is the poster advertisement, which the codec punishes with compression, leaving colour banding and macroblocks evident. The rest of scene is more complicated material and demands the codec to utilize more bitrate, ending up looking not too bad at all, when VBR is used (Variable BitRate, “changing data rate”) mode).

    [I personally found that in dark (as in nighttime) scenes, at 80% Quality there was distracting colour quantization (colour quality loss) and macroblocks (little square compression artifacts); but for most material, the 80% Quality setting seems ok to use for Xvid(b)**, most of the time]

    Xvid(b)** at Bandicam’s Default setting for Xvid of 80% Quality, the Batman: Arkham City Benchmark.
    Click to see Full Size
    The above image is an extracted frame from a recording of the Batman: Arkham City Benchmark. A very difficult scene for any codec (unless you tell it to ‘keep all quality, use 100%’ and then don’t mind the larger file size that will be created) it is hard for a codec to decide what to compress and what not to, as particles fly all over the place and light and dark areas shift around as the Benchmark runs through this area with changing levels/regions of Luma [lightness, brightness]. Bandicam’s Xvid did a good job trying to keep the text sharp at 1440p – but at 80% Quality, macroblocks are everywhere (those present in the screenshot above are not from the JPG compression, they were present in the game recording itself). At 80% Quality, anything with subtle gradient colour changes are absolutely tortured by the codec, seen especially in the change from light to dark in the Center Top light fixture area and the Left Lower curtain region. Bright areas however, such as the light fixtures themselves and almost all of the particles flying around, are judged by the codec to be ‘important to human eyes’ and detail is kept high for those objects.

    Xvid(b)** at Bandicam’s Default setting of 80% Quality, Minecraft.
    Click to see Full Size
    The above frame is taken from a recording of the Minecraft Demo starting shoreline, originally captured at 1440p (the image is resized down to 1280×720). I was interested in how Xvid would handle Minecraft, a difficult game to capture and compress, as hard edges and lines are everywhere. Bandicam’s version of Xvid did surprisingly well, as the video recording itself is a joy to watch, with compression artifacts barely noticeable (recording at higher resolutions helps with that, but uses more disk space for the game recordings). Magnification of the original video frame is just below (next image):

    These two sampled regions are magnified to 200% (doubled in size). They were extracted from the game recording frame above, which itself came from the original game recording produced by Bandicam and the built-in Xvid codec.
    Click to see Full Size
    While not as obvious in the moving video, the above frame extractions (both Left and Right sides) show Gibbs Effects [‘ringing’ or ‘mosquito noise’] around the hard edges of Minecraft’s graphics. The colour gradient changes, blending slowly into the background/sky colour in the Right Half of the above image also cause Ringing and Macroblocks to occur. Distant water gets treated with extreme prejudice by the codec, as the jumble of lines and animation from the textures are ‘sluffed together’ [my technical term] and Macroblocks are obvious. Again, these artifacts are more obvious in the stills from the game recording – the video itself, when watched, was more appealing to the eye and these compression artifacts aren’t as noticed as the frames fly by and the cow looks at you in a wondering manner.

    Regardless of some of Xvid’s compression shortcomings illustrated above, with the speed that it performs at, along with the ability to turn up the Quality setting in Bandicam, these artifacts shown will not occur as often in higher quality settings – and then Xvid can be a nice codec to run with, especially if a system cannot handle a codec that does higher processing on the frames [taking more time to do calculations on them and saving them to a file, creating ‘lag’]. Older systems or laptops that do not have the hardware to utilize GPU-accelerated game recording (with codecs such as NVIDIA’s CUDA and NVENC, AMD’s App Acceleration and Intel’s Quick Sync) can utilize Xvid as a less-taxing codec to record with [as another option on the Utility Belt of Game Recording Codecs to choose from]. Indeed, it is almost as speed efficient as the ever-compatible MJPEG codec, for capturing, editing and compression.

    The default setting, when installing Bandicam, creates a GOP of 150 [GOP stands for Group Of Pictures or the number of frames between Information/Key Frames in a video]. This is fine for normal viewing (and it leaves a lot of headroom for compressing ‘only the differences’ between the frames, resulting in smaller filesizes), but a large GOP can create problems with editing, as many NLE’s (Non-Linear Editors, such as Sony’s Vegas/MovieStudio line, Adobe’s Premiere products, Lightworks and more) do not work well with so many frames in-between the Keyframes – however, editors such as Corel’s VideoStudio, CyberLink’s PowerDirector and Microsoft’s own Movie Maker do not exhibit this issue [I tested these three applications by hand, myself, just to make sure and they imported fine and were handled without the “glitchy-ness” or “trails” that were exhibited in (for example) Vegas].

    Although originally captured for an article on the Xvid codec here (which can potentially also experience the issue mentioned in the above paragraph) this image shows an example of what the “trails” or “glitchy-ness” will look like, as it was captured from a video with a Large GOP (large keyframe interval) output produced by Vegas. (Click to see Full Size)

    When editing a video with a large GOP, the video editing application must ‘seek’ to the next Keyframe whenever it has to process a request and calculate/build all of the frames from there (which slows things down and delays processing and editing). Also, depending on the application, with some programs video can only be ‘cut’ on keyframes (unless an application is coded to create keyframes where needed). All of these steps and problems created by ‘Long-GOP’ video can be avoided [when using the above-mentioned video editing programs] by simply adjusting the Keyframe Interval in the Xvid settings to “1”.

    One caveat to keep in mind, with setting a Keyframe Interval of “1”: although it will now make for speedy/easier/morecompatible editing with many video editing applications, the codec will not have as much ‘headroom’ to work with, when compressing your game recording material. 
    What this means is, that instead of only keeping track of the changes between frames (say, a person running by down the side of the screen), where the codec will literally only save those ‘differences’ in the file; it now has to save every single portion of the viewable screen in every single frame, complete and independent in ‘stand-alone’ frames (the KeyFrames), and while the video will be much faster in seeking and have increased editing compatibility, the codec requires much more bitrate now, to save ‘everything’ in every single frame.
    The result: your video file size will end up larger than before. However, you can now edit the video in Vegas, Premiere, Lightworks and more… the choice of how to go about this aspect then, is up to you [whether to use a GOP of 1 for easier editing, or not]. If you do not use these specific video editing programs (perhaps instead, you are using PowerDirector or VideoStudio Pro or Movie Maker, which to not have as much trouble with ‘Long-GOP’ material, not needing the GOP to be one frame) or you are not having problems with whatever editor you are currently using, there is no need to make this change to the Xvid recording settings in Bandicam [this is why there is no green indicator arrow in my ‘Suggested Settings’ illustration coming up in a little while, for this option]
    Staying on the topic of Bitrate [from the above paragraph] for a moment, “..what kind of file sizes are we looking at..?”, you might ask. Well, here is a sampling of some of the Bitrates that were seen when recording with Xvid(b)** at Bandicam’s Default Settings for the codec:
    table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px; } .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc; } .tableizer-table th { background-color: #104E8B; color: #FFF; font-weight: bold; }
    Recorded Game Title                    Resolution     BitRate (Mbps, GBph) 
    Hitman: Absolution Benchmark 1366×768 ~ 34 Mbps, 0.97GB/hour
    Hitman: Absolution Benchmark 2560×1440 ~ 83 Mbps, 2.4GB/hour
    FurMark (Full Run) 1366×768 ~ 44 Mbps, 1.2GB/hour
    FurMark (Full Run) 2560×1440 ~ 45 Mbps, 1.2GB/hour
    Unigine Valley Benchmark 1366×768 ~ 37 Mbps, 1.06GB/hour
    Unigine Valley Benchmark 2560×1440
    Batman: Arkham City Benchmark 1366×768 ~ 20 Mbps, 0.57GB/hour
    Batman: Arkham City Benchmark 2560×1440 ~ 54 Mbps, 1.5GB/hour
    table code created by Danny Sanchez (journalistopia.com)
    Just to compare some file sizes of other codecs: the Low Quality setting for the Dxtory codec (with Compression) recorded a run of the Unigine Valley Benchmark (at 1080p) at about 326Mbps (9.3GB/hour), while FRAPS produced a recording of about 291Mbps (8.3GB/hour), with Lagarith (in Default/RGB Mode) creating a recording of the same material that ran at about 235Mbps (6.7GB/hour). Of course, bitrates fluctuate, depending on the complexity of the material (more movement/action/etc, which requires more bitrate to properly represent the material.. but a longer explanation of that is outside the scope of this post [believe it or not…I’m trying to keep them ‘short’! hah]).
    The other setting that can be changed in the Bandicam interface for their version of the Xvid codec, is the Quality. Here is an example of the differences in quality output at the various Quality settings for Bandicam’s Xvid:
    Comparison between varying Quality settings, for Bandicam’s version of Xvid (from Left to Right; Quality at 40%, 60%, 80% and 100% Quality). The JPG compression used for this composite [the four videos side-by-side] did not overly affect the Macroblocking occurring – the ‘blockyness’ seen in these frames is almost untouched, even though the videos from the original Unigine Valley Benchmark recordings were converted into this JPEG image – this is very close to how it looked in the video (although slightly more noticeable as still images). Click to see Full Size
    As you can see, the perceived quality for Xvid goes down quickly, with Macroblocks becoming more obvious as the quality setting goes down. However, acceptable Quality can be maintained if the quality setting is kept high [in my opinion, stay at 90% or higher if you can]. Remember though, that with the higher quality settings, more space will be required by the codec, to save all of that data. Also, if using a Keyframe Interval of “1” (creating a GOP size of one frame, each frame in the video then being a Keyframe), the codec will also not have as much room to compress the images/video and your output size will increase. As stated above though, the benefit of using a Keyframe Interval of “1” is, then your game recordings will be easily importable/editable in NLEs like Premiere, Vegas, Lightworks, etc – if you are are having troubles with those specific applications [if you are not, there is no need to limit the GOP to one frame, which is why there is no green arrow indicator in the below illustration]. Below, are my Suggested Settings then, for this codec in Bandicam, in one image:
    The ‘Setting Of The Month’: Bandicam’s Version of Xvid, included with Bandicam (Suggested Settings):
    Quality is at 90%, PCM (“Uncompressed”) Audio is selected [mainly for editing compatibility], a higher compression (“Smaller file Size” option) is chosen (and a Keyframe interval of “1” is suggested for compatibility with editing applications such as Vegas, Premiere, Lightworks, etc. if required [only change if needed as it increases file size, no green arrow indicator is shown on the Keyframe Interval])
    Click to see Full Size

    Overall, I think ‘Bandisoft’s version of Xvid’ in Bandicam does a decent job with Quality – and is downright excellent where Performance is concerned. On my system (and hopefully yours), Bandicam’s Xvid had very little drain on the performance of the game while recording with it, creating very little ‘lag’ while recording (it had a low ‘performance hit’). As long as the quality setting is kept high (90-100%), the recorded output Quality can be quite acceptable, with only a little Macroblocking (block shapes being visible) and Posterization [colour quantization, which is a reduction in the amount of colours, resulting in ‘colour banding’ or ‘bands’ seen] in the darker and ‘flatter’ areas of a frame in a game recording (Macroblocking may occur in areas such as skies, less-colourful regions, etc). Try out some recordings with Bandicam’s version of Xvid for yourself and see if you prefer using it for recording your gaming adventures.
    Please note dear reader, that I am not saying “this codec is the best one to record with” or “use this one only”. I am merely showing that it is possible, or how to tweak it for quality or file size, as to your own personal tastes. There are many codecs out there to choose from when game recording and although some are more apt for certain types of games than others, overall it is your own choice to do with as you wish – use what you prefer. 



    See you in the games!


    Personal Short Version/Opinion:


    While the Bandisoft-optimized version of Xvid included in Bandicam works pretty well and is fast, I find myself not using it very often, other than this past month or so, for testing. After recording for a while with Xvid’s ‘successor’, h.264/AVC, the extra features of Deblocking and other tools in AVC have ‘spoiled’ me. Going back to the slightly more ‘blocky’ output of Xvid – even though it creates very little lag when recording – is slightly distracting to my eyes. When I see an Xvid game capture of mine now, my eyes are instantly drawn to the darker/flatter areas of the scene and those little tiny block shapes…and I sigh at the slowly-aging Xvid codec, remembering its’ heyday’ of compressing my TV shows recorded on my ATi TV Wonder PCI card. The late 1990’s and the 2000’s were ‘Xvid’s Time’ to me, when I used it for almost everything – and while it performs well in game recording today (even Xvid.org’s ‘Official’ version, with the right settings), I am now just too used to the benefits of more modern codecs, like h.264/AVC, which can even use the videocard/hardware, for GPU-accelerated recording.

    I realize there are a lot of people gaming on laptops out there, and not everyone has a dedicated/separate videocard inside their system to record with, but the more I use my GPU to record with, the more I am impressed with the performance when recording most games [note that some games ‘don’t like’ GPU-accelerated recording (are not fully coded for compatibility with it) and these games have large hits to performance with it]. At the moment of this writing, I have two NVIDIA videocards running in my system (performing together in SLI mode) and I am enjoying using the GPU-accelerated CUDA offering in Bandicam to record with. Like AMD’s AppAcceleration and INTEL’s QuickSync, CUDA utilizes H.264/AVC through the hardware to record, having high performance [for most games] and producing nice output, utilizing some of the newer aspects of MPEG-4 (such as Deblocking) when recording, to hide compression artifacts [the little ‘glitches’ from compressing the video]. The speed, and presence of light ‘compression correction’ from this hardware implementation of MPEG4 has spoiled me now, and I am finding it hard to go back to the slightly more obvious artifacting in ‘older’ codecs, such as MPEG-1 or Xvid (which is ‘older’ MPEG-4), especially when those codecs are used at lower quality settings, to try and save hard drive space. (Turning up the Quality settings for these codecs helps a lot, if your system can handle it)

    As CPU architecture evolves and modern CPUs have ‘mini-GPUs’ built into them, the differentiation of capability between ‘gaming rigs’ and ‘gaming laptops’ blurs [as far as game recording goes], as GPU-accelerated game recording is possible now by less and less expensive hardware (AMD APUs) and processors (INTEL’s QuickSync), even within laptops [as opposed to full desktop systems]. This means that “gaming laptops” now have much more capability when it comes to game recording, today. If your laptop is capable of using GPU-accelerated recording, give it a try. If it is not, systems that do not use the GPU to compress their video can still perform well recording games, as is shown with the above article, by using Xvid. “If you can’t choose the H.264 encoder in Bandicam, choose ‘Xvid'” ~ Quote from the Bandicam.com website.

    Do some testing of your own dear reader – and have fun experimenting, finding a codec that you will eventually prefer to record with – and See You In The Games…
    Last Remarks (in addition/continuation to the Prologue of this article): 
    Another thing to keep in mind is, that my settings (both for Recording and Editing/Rendering) change slightly over time… I may have been able to purchase a new disk drive recently for instance, so then I will allow my recordings to take up more space [for a while anyway]. I may be trying out a Demo/Trial of a new version of a Video Editing Application, so I have been experimenting with some different Rendering settings. Perhaps a videocard driver or codec was updated, so now I will experiment a bit with the recording application settings, seeing if I can squeeze a little more Quality out of my recordings, while keeping the Performance high. All of these reasons and a few more, are why my settings constantly change over time. Don’t worry, I’ll try to remember to come here and share them with you, anytime I find a “Good Combination” that works well for either High Quality or Fast Performance, the ‘Holy Grail’ of course being a Perfect balance of both. 
    As I have begun more dedicated testing over the past few years, I have found that specific games themselves ‘prefer’ certain recording and rendering settings over others. What I mean by “prefer” is: as new game rendering engines are written, hardware architectures change, and programmers utilize ‘something over another’ in general during a game’s development, this affects what settings a game ‘works better with’, whether it is a specific game recording program, hardware/GPU, or specific recording and rendering settings; hence my usage of the word “prefer”. 
    This is why, for example, some games will perform better on an AMD/ATi-based videocard in Benchmarks and Reviews than an NVIDIA-based GPU – and then other games will have better results on an NVIDIA-based videocard over an AMD/ATi-based GPU – those games were simply being developed [the programmers wrote the code] on a system with that certain GPU installed in it at the time. This also means there is a chance of specific optimizations in programming that slightly favour one brand of GPU over another [and they may even have been ‘compensated for their efforts’ by that respective company, but *shhh* these things aren’t spoken of outside Mordor]. 
    In regards to the above and game recording, I have found that some games will have better performance with different game recording applications as well. For example, one game may have less of a performance hit while recording with Dxtory and then another game will have better performance recording with Bandicam [as an example] – it all depends on the code and how it is written and being rendered. That’s why I ‘change it up’ so often, altering my recording settings (and rendering settings) as each game I play exposes its nuances. That’s what I mean if I ever say a game ‘seems to prefer’ recording with one game recording program over another. 
    Keep this all of the above in mind then and also remember dear reader, that I am never telling you “you should use this”, I am always suggesting only a possibility in my posts, and it is always up to you to try it out and decide if you want to use a recommendation of mine or not.
     [I encourage everyone to always take the good ideas from others and leave the bad, making up a composite of their own liking and preferences and what they want to utilize – whether it is with game recording and editing, or Life In General – but, that last part is for another blog…] 

     **[designated as “Xvid(b)”, to show that it is the “Bandicam-Optimized Version of Xvid”]

    Integrating Peer Feedback

    Sometimes my students surprise me.

    We’re studying the Measurement and Data standards right now in math, and we were struggling a bit with 4.MD.2 – the measurement word problems standard. We’ve been using some of the free math units from Engage NY (a resource I highly recommend), and we were on day 3 of working through word problems, and I knew I had to mix it up a bit. Here’s what we did.

    First, students worked through 6 word problems from module 2. The word problems were multi-step and used many different types of metric measurement. They completed these problems independently, but they could consult other students if they got stuck. Once everyone at the table finished, they checked their work with each other to make sure they agreed on the same answer.

    Next, I assigned each table a different focus problem from the 6 that they solved. They had about 10-15 minutes to work together to design a poster that explained the problem and solution. They could represent their work any way they wanted, but the work had to speak for itself — they wouldn’t be there to explain the poster to anyone else.

    Once the posters were completed, I gathered the students together on the carpet, and we reviewed the Standards for Mathematical Practice using these posters I’ve made:

    We talked about using these standards as opportunities to give feedback. We also discussed how effective feedback needs to be specific and constructive. If you like something, say what, specifically, you liked and how it helped communicate an idea. If something needed to be improved, explain what and how that could be done.

    Once I felt like the students had some ideas for ways to give good feedback, I had the students do a gallery walk around the classroom to look at the other posters. In a gallery walk, students use sticky notes to comment on other people’s work. They can leave positive and/or constructive feedback. I let the students comment anonymously if they wanted, and they were able to reference the SMP posters if they needed ideas (I gave them access to a digital copy on their iPads). I used a timer, and they spent 5 minutes studying and commenting on each poster before rotating.

    Once they’d rotated through all of the posters, the returned to the poster their group had made, and they took a few minutes to read the feedback. I had them work together to sort the feedback into the categories “helpful” and “not helpful.”

    We shared a few examples of helpful comments with the whole class:

    • “I like how the team drew pictures to represent the problem, but I think the team could have explained what each picture represented from the problem.”
    • “The pictures aren’t in proportion to one another. The drawing of 1,500 mL is much larger than 3 L, but really the 3 L should be larger.”
    • “Something I really like about your poster is that it has pictures to represent the problems. One thing that you could have done differently is represent the subtraction and addition with a tape diagram.”
    • “You could have represented the answer in mixed units to make your answer clearer.”

    We then talked about unhelpful comments — one word comments or feedback that focused more on style than substance.

    Overall, this lesson was very helpful in getting the students to think about the Standards for Mathematical Practice and how to give effective feedback. Each group had ideas for things they wanted to change on their posters based on peer comments, and some groups even asked to work on it more during recess! It was also a good reminder for me that students can give each other powerful feedback, and I need to provide them with more opportunities to do this across the subject areas.

    If you’d like to get a copy of my student-friendly Standards for Mathematical Practice posters, they’re available in my TpT store by clicking the image below.

    What are some ways you incorporate peer feedback in your classroom? I’d love to hear more ideas in the comments section!

    Cut your Risk for Catching a Viral Illness by 9 times!

    That is NOT a typo – research has revealed a nutrition supplement that can cut your risk of acquiring a viral illness such as a cold or the flu by 9 times!  That supplement is Quercetin.   Quercetin is a phytochemical (plant chemical) found in many plants including apples, plums, red grapes, green tea, and onions to name a few.
    Quercetin has been show to inhibit several different strains of influenza (the flu) along with hepatitis B and C along with other viruses.   Quercetin also reduces inflammation and works as an antihistamine and is frequently used to reduce seasonal allergy symptoms.   Quercetin has also been proven to boost mental and physical performance when under extreme physical stress.
    The three key ways that Quercetin inhibits viruses are:
    Inhibiting a virus’s ability to infect other cells (viruses literally infect your cells then take control of them and make them produce more virus!)
    Inhibiting replication of already infected cells
    Reducing infected cell’s resistance to treatment with anti-viral medication
    Research on Quercetin
    In a 2007 study from Appalachian State University researchers did a study funded by the Department of  Defense.   The study used had 40 cyclists divided into two groups with one group receiving 1,000mg per day along with vitamin C and niacin while the other group got a placebo.
    They had the athletes ride a bicycle for three hours per day, three days in a row.    45 percent of the placebo group contracted a viral illness after the physical stress compared to just 5 percent of the quercetin supplement group.
    In a 1985 Study, researchers found that quercetin reduces the infectivity and replication of Herpes Simplex Type 1, Polio-Virus Type 1, and parainfluenza type 3 along with respiratory syncytial virus.
    A 2016 Study found that quercetin inhibited a wide range of influenza strains including H1N1, H3N2, and H5N1.   
    Quercetin Supplements
    In collaboration with the Defense Advanced Research Projects Agency (DARPA) a supplement called “Q-Force” was developed that is proven to:
    Increase Mental Alertness
    Strengthen the Immune System
    Provide Sustained Energy
    Reduce Oxidative Stress and Muscle Soreness Post Exercise
    Q-force is available at www.qforce.comand Quercetin Supplements combined with Vitamin C are available at all health food stores.     

    My Travel Tips

    I started traveling as a consultant form April of 2002. I have now completed ten years of travel. For my assignments I travel both economy and business class and use a variety of airlines. To commemorate my ten years of traveling I have compiled some travel tips. They are aimed at reducing the stress of modern travel to enable you to have a pleasant journey with the minimal amount of discomfort and hassle.



    These are my top travel tips based on my travel experience since 2002 and the post 9/11 world. (E6K9HKXKPPNE)


    Clothes and shoes


    1. Do not wear a belt – this will help you to pass through security without having to go through the hassle of taking it off and putting it on. It also helps in blood circulation.


    2. Do not wear any items of clothing which contain metal buttons, clips, labels etc.


    3. Do not wear clothing with a lot of pockets – you can forget a coin or a key and will set off the metal detectors


    4. Do not wear tight clothes this will cut your blood circulation and make the journey uncomfortable.


    5. Don’t wear baggy clothes; wear comfortable cloths that are close to your body – lets face it you will be profiled no matter what they say; so wearing baggy clothes sets off alarm bells with the security personnel. They are more likely to pad down a person wearing baggy clothes as opposed to someone wearing well fitting clothes.


    6. Try to wear slippers or sandals, if you feel clod wear a pair of socks with the slippers or sandals. If you need to wear shoes wear thin sole shoes (without any metal fittings) with no shoelaces. This will either negate the need to take off your shoes or make it easy to take off and put on shoes


    7. Try to dress in the thinnest possible layers of clothes instead of wearing / carrying bulky heave jackets / coats so that you can remove or add depending on your level of comfort. Thin clothes weigh less take less space in your hand luggage / carry on luggage.


    Money and Travel Documents


    1. Do not carry any coins. If you must carry coins in a small transparent plastic bag and put the coins in a pocket of your carry on luggage.


    2. Always carry more than one currency: example if you travel via to London to USA carry British Sterling Pounds as well as Dollars.


    3. Try to pre pay for as many expenses as possible before departure. This helps to minimize the amount of money you need to carry, as well as be able to bargain to the maximum and not be made to decide on the spot about your travel options. Use the internet and always cross check and read reviews of restaurants, taxi service and other services you are likely to pay for in cash so that you don’t get taken for a ride.


    4. Carry globally accepted credit cards as a payment option and for emergencies.


    5. Always take travel insurance; you never know when you might fall sick or get injured.


    6. Always carry your passport, visa, travel insurance, hotel reservations, travel vouchers, invitation letters, letters of sponsorship etc in one safety pouch / folder. This way you don’t have to look for them in multiple places. Keep them safe and close to you.


    7. Never ever give the bag containing these documents to anyone (except your family or personal assistant / colleague).


    8. If you are using a VIP service to breeze through emigration and customs make sure that you have line of sight of the person at all times. Confidence tricksters pretending to be service providers will walk off with your belongings.


    Baggage


    1. First check the weather of your destination (12 hours before departure – weather forecasting gets better when nearer to the dates concerned.)


    2. Finalize your clothes 12 hours before you travel, based on above.


    3. Choose clothes that can be mixed and worn: Take white shirts / blouses which can be worn with any pants / skirts and jackets. Take a few different ties / scarf and accessories so that you look different but use the least number of clothes. I am a firm believer in the use of hotel laundry services. I prefer to get the items laundered at the hotel and avoid carrying your entire wardrobe with you when you travel. Make sure that you as well as the hotel has a clear understanding of the difference between dry cleaning and washing of clothing items.


    4. Try to use the minimum number of bags as possible.


    5. Golden rule is that: if you do not need an item during the journey / flight, then it goes in with the check in luggage. One of the benefits of the post 9/11 world is that the airline industries ability to track and link you baggage to you has improved tremendously. So you do not have to carry any back up clothes in your hand luggage just in case your luggage gets lost.


    6. If you do not have any check in luggage then you need to ask the question do I really need to carry the item or can I buy it at my destination and use it. Remember most consumables (Soap, Shampoo, Mouth wash etc) are similarly priced everywhere and most hotel now provide them in the room). It’s worth trying a new brand of an item to reduce the weight and hassle of taking them in 50 ML clear bottles etc.


    7. Have a good idea of your baggage allowance. Especially if you fly economy class; it may change from airline to airline. The rule of thumb is that if it is difficult for you to carry your check in baggage (Standard international size) it is probably over weight. An average person can easily handle 20Kg. Use this principle when standing in check in queues. Avoid standing in queues with people who have difficulty in handling their luggage. They will take longer to check in as they will have to pay for excess luggage or repack them.


    Loyalty Cards


    1. Try to get as many loyalty cards as you can. Before you embark on your journey have the relevant loyalty cards sorted out and keep them with your travel documents and put the rest in you carry on luggage. You never know when they may become handy.


    2. In my opinion the top benefits of loyalty cards are:


    a. Priority check in – the shorter the queue you need to stand in the less stressful it is to you.


    b. Excess baggage allowance – you never know when you might need it, especially if you travel with your wife / partner who will shop while you are attending to business.


    c. VIP services for priority emigration and customs clearance.


    d. Access to a lounge with free broadband internet connection


    I recommend you go for loyalty cards that provide at least one of these benefits and not bother with ones that just offer air miles for ticket discounts and free food.


    Hotels


    1. Where ever possible I recommend you insist on staying in an establishment with at least a 3 star classification. This should provide good enough comfort & facilities for a business traveler. However I have come across many hotels which are classified as 3 stars but are more like cattle sheds. If clients and budgets permit always stay at the highest class hotel in your destination.


    2. The main facilities you should be looking for when selecting a hotel are:


    a. Airport pick up and drop


    b. Free broadband internet access


    c. Complementary pressing of one set of clothes per day (shirt / blouse, trouser / skirt & Jacket) + shoe shine.


    d. Free copy of the local English newspaper – This is a helpful tool to get a feel of the local environment, best places to dine and entertainment information and of course to get an insight in to what’s happening around you.


    3. Always stay as close as possible to your customers / clients. This will reduce local travel time and getting stuck in local traffic, which you may not know about or will not be able to find out before arriving at your destination. Best is to stay within walking distance. By this you can avoid the need to haggle with taxi drivers every morning and evening if meter taxis are not available.


    4. I recommend you stay on B & B basis; this gives you a lot of flexibility to move around the city and meet the locals during meal times. This will also help you get a feel of the general business environment, mood of the people as well as get exposed to the local culture.


    Flights


    1. Always use major airlines where possible. The trend now is to go for budget airlines. I too subscribe to this philosophy but with a few considerations. They are:


    a. Safety – As with all one needs to be comfortable with the safety systems of the airline. Some budget airlines operate state of the art new aircraft, while others operate others which do not have a good safety record. So each of us need to make this choice for ourselves.


    b. Reliability – Other than Europe and North America budget airlines are not regulated in a way they are liable for delays and cancellations. Unless you have a very good insurance policy you may run the risk of having to incur the cost of delayed and cancelled flights, additional hotel and transfer costs. Budget airlines will cancel / delay / amalgamate passenger manifests for flights if they do not have the desired number of passengers for a flight to minimize losses.


    Major airlines will operate scheduled flights, and if for any reason they do cancel a flight they will look after the passengers better and try to route you to your destination with the minimum hassle.


    2. Try not to use domestic airlines. As much as possible try to get to and from your destination via an international flight. Changing to domestic airlines may be cheaper but you need to consider the following:


    a. How much time do you loose and is it worth. Most domestic flights operate at much lower altitudes and will fly at a lower speed. International flights will fly higher and faster and can provide you with considerable time savings.


    b. You may have to go through immigration in one airport and through customs in another airport. This may actually take a longer time.


    c. You will increase you total transit time (Time spent not flying) and for a business person time is money.